Found unit not heating. Checked incoming power. Incoming power checks ok. Found heating element with 0 resistance. Replaced heating element. Cycled unit through timed dry. Unit now heating. All functions pass.

Found unit not draining. Checked drain pump. Found blockage in drain pump. Removed blockage. Cycled unit through quick wash. Unit drains. All functions pass.

"Installed all parts. Cycled unit through diagnostics cycle and quick wash. Unit fills with water, recirculates, heats and drains. All components working all functions pass."

Found unit making squealing noise when in spin. Checked underneath machine found tons of oil spilling out of gear case. Tried to remove screw for agitator screw would not come loose after all attempts because of age of unit spanner nut is most likely stuck on shaft of gear case as well and will most likely need to be cut off. Will order parts.; ordrng 1 W10752187 (Screw) and 1 W11178224 (Basket) and 1 W11551646 (Nut spanner) and 1 W11550891 (Agitator)

Found unit sweating in between top two doors. Found pinched wire behind mullion heater and found split in right top door gasket. Will order gasket and mullion heater.; ordrng 1 W11455378 (Mullion heater) and 2 W11456682 (Door gasket)s