We serviced a
KITCHENAID REFRIGERATOR
Model KUDR204ESB02
Near Asheville, NC 28803
Brian
Job Details: 07/22/2024
Temperatures ok when I arrived. Found no alarms going off when i arrived. Found bottom door not closing properly due to cabinet obstruction adjusted unit and found door closing properly and consistently. At this time all operations ok with no leaks detected. Collected 150 for service call.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Simpsonville, SC 29680
Carl
Job Details: 07/22/2024
Removed old compressor installed new compressor and dryer filter pulled vac installed 54 gr r600 cycled unit on unit started to pull down in temp unit ck ok
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS2
Near Asheville, NC 28803
Brian
Job Details: 07/22/2024
"Installed new control and vent. Tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Asheville, NC 28805
Brian
Job Details: 07/22/2024
Installed new wash motor. Tested and found all operations ok with no leaks detected.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ05
Near Weaverville, NC 28787
Kari
Job Details: 07/22/2024
"Took quick pics, found fan making a rattling when running and it stops when door is opened. Installed new fan and put thicker gaskets on evap panel. Unit checks ok; used 1 WP2315549 (Fan) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Greenville, SC 29605
Larry M.
Job Details: 07/22/2024
Replaced heater and icemaker. Cycled icemaker. Checks ok
We serviced a
KITCHENAID KITCHEN
Model KRFF707ESS01
Near Greenville, SC 29609
Larry M.
Job Details: 07/22/2024
Found ice built up at bottom of refrigerator. Thawed out ice. Will need thermistor. Customer would like to reschedule when they are back in town. Will need tech with more experience in refrigeration. ;
We serviced a
WHIRLPOOL KITCHEN
Model WFG320M0MS0
Near Greenville, SC 29605
Larry M.
Job Details: 07/22/2024
Found main not responding. Ordering main control. ; ordrng 1 W11620481 (Main control)
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Easley, SC 29642
Larry M.
Job Details: 07/22/2024
Failed to bring part with me. Will need to return. ; ordrng 1 W11613479 (Sump pump and motor assembly)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ
Near Easley, SC 29642
Larry M.
Job Details: 07/22/2024
Failed to bring part with part with me. Will need to reschedule. ;
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Easley, SC 29642
Larry M.
Job Details: 07/22/2024
"Replaced cabinet, main control and power cord. Ran test cycle. Checks ok."
We serviced a
KITCHENAID DISHWASHER
Model KDTE334GPS0
Near Greer, SC 29650
Chris
Job Details: 07/22/2024
Found loose lower panel causing rattle. Added screw. Unit check is ok
We serviced a
WHIRLPOOL DRYER
Model CEM2795JQ0
Near Taylors, SC 29687
Chris
Job Details: 07/22/2024
Unit has loose contacts in outlet. Moved cord in outlet and voltage appears at terminal block. Heats and runs. Advised customer to contact electrician
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Greenville, SC 29615
Chris
Job Details: 07/22/2024
"Unit has broken wire harness Causing pump to short. Noise from gearbox. Installed new parts unit check is ok . New labor authorization is w1bsch0nl1.5; used 1 W11643701 (Harness), 1 W11399437 (Pump), and 1 W11449840 (Gearbox) from stock"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Greer, SC 29651
Chris
Job Details: 07/22/2024
Installed new door. Unit check is ok k1br4q0nl2
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS2
Near Greer, SC 29651
Chris
Job Details: 07/22/2024
Installed new parts. Unit check is ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Burnsville, NC 28714
Kari
Job Details: 07/22/2024
"Took quick pics, found unit leaking from door. Found the vent was cracked and leaking into door installed new vent. Unit is cutting off when its supposed to. Customer was unaware of cycle times on new units. Unit checks ok; used 1 W11682810 (Vent) from stock"
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Weaverville, NC 28787
Kari
Job Details: 07/22/2024
"Took quick pics, found unit showing 7-4 basket reengagement fault. Found the agitator is the only thing that spins, took rotor off and found slide magnet had came apart from plastic ring need slide for repair. Rescheduled customer for 7/26 AM; ordrng 1 W10734521 (Slide) and 1 J13 (Job code)"
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Easley, SC 29640
Larry M.
Job Details: 07/22/2024
Replaced dispenser. Ran test cycle. Checks ok.
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Moore, SC 29369
Sam
Job Details: 07/19/2024
"Found unit not spinning. Found belt torn to pieces and Splutch melted to shaft of gear case. Unit will need new gearcase, belt and Splutch. Will order parts and return for repair.; ordrng 1 W11239857 (Belt) and 1 W11454372 (Gearcase) and 1 W10721967 (Splutch)"
We serviced a
WHIRLPOOL WASHER
Model WTW5100HC3
Near Spartanburg, SC 29307
Sam
Job Details: 07/19/2024
Found lid not locking. Found lid strike cracked not letting unit lock. Replaced lid strike from stock. Cycled unit through quick wash. All components working. All functions pass. ; used 1 W11457841 (Strike) from stock
We serviced a
MAYTAG WASHER
Model WTW5057LW0
Near Greer, SC 29650
Chris
Job Details: 07/19/2024
Customer states unit makes horrible grinding noises in agitation. Unit has long drain fault stored. Unit will not advance through auto test nor acknowledge water in basket. Unit will not lock .Unit has broken wire at pump. Repaired wire. Resumed diagnostics. Unit has loud noise in drive train.unit has extremely worn cam gears. Gave customer a bluebook estimate for repair $366.00. Installed new part. Unit check is ok ; used 1 W10721967 (Cam) from stock
We serviced a
KITCHEN AID ICE MACHINE
Model KUIX535HPS00
Near Greer, SC 29650
Chris
Job Details: 07/19/2024
Customer states unit never made ice after last visit . Customer states he heard fan running and still felt heat on front of unit. Customer states cleaned light never turned off unit after running clean cycle . Started cycle. Fan runs . Recirculation and drain pump work. Good water pressure from new valve. Compressor comes on with condenser fan. Condenser is clear of obstructions. Called tech line and spoke with rich. Dumped reservoir to watch plate frost over . Plates frosted over . No sealed system problem . Took pictures of sealed system frosting plate completely over.put cap back on reservoir and cycled unit again by turning unit off and on again . Rich advised everything Is functioning as designed at the moment . Rich advised and suspect customer not finishing clean cycle and that software is written into unit that unit must finish entire 100 minute clean cycle . Not finishing clean cycle will send bad reading back to board to harvest slab quicker bc unit thinks there is a water problem. Started clean cycle . Advised customer to cut unit off after 100 mins. Leave unit off for 30 seconds l empty reservoir and turn unit back on . Cleaning light should be off. Suspect customer not letting unit run through entire clean cycle causing miscommunication readings to control for water level causing unit to hang slab faster. All per tech line. File number for call is 7739480386
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Greenville, SC 29609
Larry M.
Job Details: 07/19/2024
Found dryer vent backed up. Vent making a whistling noise. Advised customer to have vent cleaned. Customer insists unit is malfunctioning. ; ordrng 1 279827 (Motor)
We serviced a
MAYTAG WASHER
Model MVWB765FC3
Near Travelers Rest, SC 29690
Larry M.
Job Details: 07/19/2024
Customer would like unit replaced. Educated customer on how to use unit properly. Customer states unit is making a grinding noise. Customer declined repairs. ; ordrng 1 W10811957 (Inner basket) and 1 W11393685 (Gearcase) and 1 W11130359 (Suspension)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHV04
Near Swannanoa, NC 28778
Kari
Job Details: 07/19/2024
Installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW1
Near Asheville, NC 28804
Kari
Job Details: 07/19/2024
Installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHW05
Near Travelers Rest, SC 29690
Larry M.
Job Details: 07/19/2024
Quoted customer $479.02 to replace ice maker. Customer approved repair. Partial payment of $239.50 collected ; ordrng 1 W11284458 (Ice maker) and 1 J13jobcode (J13 job code)
We serviced a
MAYTAG DRYER
Model MED6230HW2
Near Greer, SC 29650
Chris
Job Details: 07/19/2024
Unit has worn idler pulley. Replaced from stock. Unit check is ok
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Slater-Marietta, SC 29661
Larry M.
Job Details: 07/19/2024
"Replaced thermastat, educated customer on how to use unit. Customer insists that the unit has a problem. Ordering element ; ordrng 1 279838 (Heating element)"
We serviced a
MAYTAG WASHER
Model MVWC465HW4
Near Easley, SC 29642
Larry M.
Job Details: 07/19/2024
Replaced main control. Ran test cycle. Will not engage lid lock. Customer would like unit replaced. Drew from tech line 7739532604 Advised to replace lower harness. Customer declined repair. ; ordrng 1 W11665968 (Lower harness)
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EFS00
Near Hendersonville, NC 28739
Kari
Job Details: 07/19/2024
Installed parts unit checks ok
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Hendersonville, NC 28792
Brian
Job Details: 07/19/2024
Installed legs and main wire harness and terminal cover. Could not test unit because plug is inaccessible.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS335SDHM03
Near Hendersonville, NC 28792
Brian
Job Details: 07/19/2024
"Installed new freezer fan motor. Tested and found all operations ok at this time, with no leaks detected."
We serviced a
WHIRLPOOL M/W OTR
Model WMH32519HZ3
Near Horse Shoe, NC 28742
Brian
Job Details: 07/19/2024
Found unit heating a little and other times not. Customer said the Magnatron and diode have been replace already. Found unit pulling 15 plus watts. Tested and found Magnatron (WPW10693025) Capacitor (W10850446) Diode (W11256462) and Transformer (W10836753) needed. ; ordrng 1 W10836753 (Transformer) and 1 2ndtech (2nd tech) and 1 Q16 (Job code)
We serviced a
WHIRLPOOL FREEZER
Model WRF767SDHz04
Near Boiling Springs, SC 29316
Sam
Job Details: 07/19/2024
Installed water valve. Cycled units water through dispenser and ice maker fill test. Water dispensing normally. No leaks found. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Boiling Springs, SC 29316
Sam
Job Details: 07/19/2024
Found unit not draining water. Checked connection to drain pump. Connections secure. Drain pump not activating. Replaced drain pump from pre id. Cycled unit through quick wash with load. Unit draining. All components working. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Pauline, SC 29374
Sam
Job Details: 07/19/2024
"Installed compressor, condenser and drier filter. Checked for leaks with 250 psi of nitrogen, no leaks detected. Charged unit with 53 grams of r600a. Let unit run for about 20 minutes. Unit starting to cool compartments and holding good pressure. All functions pass."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZ00
Near Simpsonville, SC 29680
Carl
Job Details: 07/19/2024
Found drain cloged cleared door handle set screw is striped j13; ordrng 1 W11045125 (Ss handle)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Simpsonville, SC 29681
Carl
Job Details: 07/19/2024
Ran diagnostics and error ink thurmstor open installed new ima cycled unit got good fill nit ck ok
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Simpsonville, SC 29681
Carl
Job Details: 07/19/2024
Found motor Bering damaged installed new motor cycled unit ck ok
We serviced a
MAYTAG DRYER
Model MEDC465HWO
Near Greer, SC 29651
Chris
Job Details: 07/19/2024
Unit has broken timer shaft . Gave customer a bluebook estimate for repair at $514.38.. installed new timer. Unit check is ok
We serviced a
KITCHENAID COOKTOP
Model KCGS556ESS05
Near Greer, SC 29651
Chris
Job Details: 07/19/2024
"Customer states unit takes extended times to boil water on all burners but middle . Customer states unit has been like this since new. Customer middle burner will boil water quicker . Middle burner is a dual burner . All numbered light and have normal flame . Placed pot with lid on and boiled water while timing boil times. Unit began to boil in 9 mins and 29 seconds. Called tech line and spoke with chris . Unit works as designed. Chris advised cookware and water quality can affect boil times. No fault of unit. Unit has good gas pressure and normal flames across all burners , unit check is ok. File number for call is 7739533255. New authorization is k1brs31nl1.5"
We serviced a
KITCHENAID MICROWAVE
Model KMBP107ESS20
Near Mills River, NC 28759
Brian
Job Details: 07/19/2024
Installed new cavity light and support kit. Tested and found all operations ok at this time.
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Easley, SC 29640
Larry M.
Job Details: 07/19/2024
"Replaced harness, main control, and drain pump. Ran test cycle. Checks o.k"
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Fountain Inn, SC 29644
Carl
Job Details: 07/19/2024
Ran diagnostics no error codes found lose connection at the valve reinstalled harness cycled unit got good fill several times unit ck ok
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Fountain Inn, SC 29644
Carl
Job Details: 07/19/2024
Installed new gearcase and spluch ran diagnostics and a test cycle unit ck ok
We serviced a
KITCHENAID VENT HOOD
Model KVWB406DSS4
Near Greer, SC 29651
Chris
Job Details: 07/19/2024
Customer states unit doesnt exhaust strength is low . Customer states unit has been like this since new. Unit passes water paper towel test. Called tech line and spoke with Chris . Sent pictures through text of install . Vent flap opens out side . Unit has 6 inch venting as required in use and care guide . Air moves through vent . Tech line states steamy items struggle with vent hoods in particular . Customer can run unit with with cosmetic door down for better results. Unit works as designed . File number for 7739533346. New authorization is k1brs40nl1.5
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Lyman, SC 29365
Chris
Job Details: 07/19/2024
Unit is completely dead. Voltage good at outlet. Installed new parts. Unit check is ok
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Lyman, SC 29365
Chris
Job Details: 07/19/2024
"Found extremely loud grind from gear box. Rep,aced parts from stock. Unit check is ok . New authorization is m1brs20l.15; used 1 W11449840 (Gearbox), 1 W10721967 (Cam), and 1 W11239857 (Belt) from stock"
We serviced a
KITCHEN AID DISHWASHER
Model KDFE104HWH0
Near Greer, SC 29650
Chris
Job Details: 07/18/2024
Completely different failure since last visit . Unit has f2-1. Ordeing for repair ; ordrng 1 W11088846 (White UI) and 1 S17 and 1 W10919302 (Wire) and 1 W11305303 (Control)
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HB08
Near Boiling Springs, SC 29316
Sam
Job Details: 07/18/2024
Installed all parts. Cycled unit with cup of water. All components working. Unit heats and operating properly. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ16
Near Easley, SC 29640
Larry M.
Job Details: 07/18/2024
Found ice bucket jammed. Removed ice bucket. Found crack in ice bucket. ; ordrng 1 W11185686 (Ice bucket)
We serviced a
WHIRLPOOL RANGE
Model WFE535S0LZ2
Near Easley, SC 29642
Larry M.
Job Details: 07/18/2024
Replaced cooktop and element. Checks ok
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Easley, SC 29642
Larry M.
Job Details: 07/18/2024
Installed timer. Ran test cycle. Checks ok.
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Westminster, SC 29693
Frank
Job Details: 07/18/2024
Replaced wire harness tested working ok.. motor and valve working ok.. motor washing ok
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Seneca, SC 29678
Frank
Job Details: 07/18/2024
Found lid wad caved in due to putting something heavy on top. Lid not locking right.. bent lid back up into shape tested cycle. Locking working ok
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Pendleton, SC 29670
Frank
Job Details: 07/18/2024
Replaced timer and knob. Tested working ok
We serviced a
WHIRLPOOL DRYER
Model WED500CMW0
Near Spartanburg, SC 29306
Sam
Job Details: 07/18/2024
Installed harness and motor. Cycled unit through timed dry. Unit tumbles and heats. All components working. All functions pass.
We serviced a
MAYTAG WASHER
Model MVWB765FW
Near Taylors, SC 29687
Chris
Job Details: 07/18/2024
Unit has f5 and f1 faults. Replaced parts from stock. Ran test 51. Unit locks in step 11. Unit passes step 51. Unit check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ09
Near Duncan, SC 29334
Chris
Job Details: 07/18/2024
Adjusted water filter door. Unit now closes. Unit check is ok
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW3
Near Spartanburg, SC 29306
Sam
Job Details: 07/18/2024
Found lid not wanting to lock tried running through drain and spin and said to close the lid even when lid is closed. Couldnt activate lid lock in diagnostics. Replaced lid lock. Cycled unit through diagnostics and drain and spin. Unit locking all components working. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT549SZDM04
Near Greenville, SC 29607
Chris
Job Details: 07/18/2024
Unit has ice ball around cap tube indicating sealed system failure . Ordeing for repair ; ordrng 1 W11562258 (Evap) and 1 Processstub and 1 X20 and 1 Sealedsystemtech and 1 R600 and 1 Dyedrier and 1 W11580057 (Compresssor)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ19
Near Spartanburg, SC 29306
Sam
Job Details: 07/18/2024
"After installing new water valve and control to unit. Found valve leaking. Found units tubing to water valve snapped end off in old water valve. Called techline, techline advised to replace reservoir manifold because that is what has the tubing. Used reservoir manifold from stock. Cycled units dispenser while cover for water valve was off. Checked for leaks on any connections. No leaks found anywhere after running dispenser multiple times. All functions pass. SR#7739524687; used 1 W11706229 (Reservoir) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW1
Near Pendleton, SC 29670
Frank
Job Details: 07/18/2024
Replaced valve assembly and switch. Tested working ok no issues
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Pendleton, SC 29670
Frank
Job Details: 07/18/2024
installed ice container..
We serviced a
WHIRLPOOL WASHER
Model WET4027HW1
Near Easley, SC 29640
Carl
Job Details: 07/18/2024
Installed new control unit ckok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Candler, NC 28715
Kari
Job Details: 07/18/2024
"Took quick pics, found fan motor is very loud. Took evap cover off and found plastic fan housing not clipped into metal evap housing. Corrected that and put foam tape behind the housing. Fan is still a little louder than it should be. Ordering fan motor rescheduling for 7/23 PM; ordrng 1 WP2315549 (Fan motor) and 1 J13 (Job code) and 1 Partinwarehouese"
We serviced a
WHIRLPOOL WASHER
Model WTW5057lLW0
Near Easley, SC 29640
Carl
Job Details: 07/18/2024
Installed new outer tub unit ck ok; used 1 W11219115 (TUB) from stock
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ2
Near Arden, NC 28704
Brian
Job Details: 07/18/2024
"Found unit not getting proper voltage but all breakers are on. Informed customer that they will,have to have an electrician resolve issue."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Etowah, NC 28729
Brian
Job Details: 07/18/2024
"Installed new ice maker. When testing, I found water leaking from under fill tube. Fill tube is not a serviceable part. Contacted tech support and spoke to Joe. He said it sounds like a water pressure issue. He recommended installing a Pressure regulator (W10786952) to reduce water pressure going to unit Sr. Number (7739527422). ; ordrng 1 W10786952 (Pressure regulator)"
We serviced a
WHIRLPOOL RANGE
Model WFE540H0AS0
Near Etowah, NC 28729
Brian
Job Details: 07/18/2024
Inspected and found bake element broken. Replaced Bake element (W10779716) and tested. Found all operations ok at this time. ; used 1 W10779716 (Bake element TS) from stock
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW1
Near Hendersonville, NC 28792
Brian
Job Details: 07/18/2024
Found f4e3 (motor not running) f7e1 (no heat). Tested unit and found unit going through cycles but wash motor isnt running motor is getting proper voltage. New wash motor (W11613479) needed ; ordrng 1 W11613479 (Wash motor) and 1 L14 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ17
Near Spartanburg, SC 29302
Sam
Job Details: 07/18/2024
Installed all parts. Cycled units power on. Fan no longer causing loud rubbing noise. All components working all functions pass.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Waynesville, NC 28786
Kari
Job Details: 07/18/2024
"Took quick pics, found unit leaking. Turned water on and started cycle. Immediately water started to pour from motor, the seal in the sump motor is broken and leaking need part for repair. ; ordrng 1 W11613479 (Motor assy) and 1 J13 (Job code)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Waynesville, NC 28785
Kari
Job Details: 07/18/2024
"Took quick pics, customer states unit gushes water from underneath. Turned water on. And immediately turned it back off. Unit is leaking from a giant crack in the water valve. Need valve for repair. Rescheduled customer for 7/30 PM; ordrng 1 W11175771 (Inlet valve) and 1 J13 (Job code)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ2
Near Waynesville, NC 28785
Kari
Job Details: 07/18/2024
"Took quick pics, found control panel peeling off, so is name tag and vent electrical error saved in memory. Need parts for repair prescheduled for 7/30 PM; ordrng 1 W11660284 (Console) and 1 J13 (Job code) and 1 W11178521 (Name plate) and 1 W11649995 (Vent)"
We serviced a
KITCHEN AID REFRIGERATOR
Model KFXS25RYMS2
Near Greenville, SC 29605
Chris
Job Details: 07/18/2024
Unit has froze over ice bin due to stuck valve. Thawed unit . Gave customer a blue book estimate for repair at $611.27. Part warranty imk and installed new valve. Unit check is ok
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Maggie Valley, NC 28751
Kari
Job Details: 07/18/2024
"Took quick pics, found unit showing same error 1-1called techline. Spoke with Robert. He sad to replace motor again. I also took back panel off and put foam tape between panels to help with noise. Customer calling whirlpool since this is second part replaced for same issue in two months. Customer is also complaining now about a burning smell. Smelled like burnt hair coming from back of unit but no odor inside drum. Customer called safety. Ordering motor per techline ; ordrng 1 WP694089 (Wheel) and 1 N15 (Job code) and 1 279827 (Motor)"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Clyde, NC 28721
Kari
Job Details: 07/18/2024
"7739522575Took quick pics, found unit making a hammering noise when filling. I pulled machine out and noise is gone, pushed machine back against wall and it comes back. Took secondary filter off to see if it makes any difference. No it doesnt. Still making hammering noise. Called techline. Spoke with Adrian he said the inner hose diameter if its not wide enough cause it to build up pressure and make noise. The hose is silver and has a tapered tunnel in it. The black ones we carry are not tapered on the inside and are about 5/16th inner diameter. Installed new hoses unit now fills fine with no noise, also suggest customer put foam between incoming line and wall or u clamp it to the wall to help it from vibrating. Unit checks ok; used 1 8212487RP (Hoses) from stock"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKV1
Near Clyde, NC 28721
Kari
Job Details: 07/18/2024
"Took quick pics, found unit showing 8-4 and a 9-2. Customer changed float switch themselves and stated the float switch is fine. I agree there was no need for float to be changed. The 9-2 indicates unit has an electrical issue in the drain pump. She states it started beeping and throwing 8-4 code at the end of cycle, unit stopped draining toward end of cycle due to electrical issue in drain motor, drain motor over heated and water over flowed into drain pan. Found evidence of dried water and soap residue in tray. Installed new drain pump. Ran unit through diagnostics cycle and a normal cycle. Unit checks ok ; used 1 W11412291 (Drain pump) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model wrx735sdhz10
Near Easley, SC 29640
Carl
Job Details: 07/18/2024
Removed r600 and compressor installed new compressor and dryer filter installed.53 gr cycled unit on started pulling down in temp unit ck ok
We serviced a
JENN AIR REFRIGERATOR
Model JFFCF72DKL05
Near Easley, SC 29642
Frank
Job Details: 07/18/2024
Still icing up in freezing. Humidity build up in fridge.. called Techline for exchange. 7739302013..
We serviced a
KITCHENAID MICROWAVE
Model KOCE900HBS23
Near Greenville, SC 29609
Larry M.
Job Details: 07/18/2024
Found lower inner glass cracked. Will order inner glass ; ordrng 1 W11600221 (Glass door) and 1 W11600213 (Air divider glass) and 1 W11602610 (Inner glass)
We serviced a
AMANA RANGE
Model AER6303MMS0
Near Greenville, SC 29605
Larry M.
Job Details: 07/18/2024
Removed rear panel found infestation of roachs inside of main control. Unable to repair unit until infestation has been taken care of itCalled trade care sr:7739482782
We serviced a
WHIRLPOOL DRYER
Model WED8100BW0
Near Greenville, SC 29615
Chris
Job Details: 07/18/2024
Customer has provided felt seal. Advised customer there is no guarantee on this repair . Advised customer the correct way to perform this job is by changing drum . Gave customer a bluebook estimate for repair at $837.38. Customer denied drum repair . Gave Customer $398.16 to replace customer provided felt seal with no guarantee on repair . Again advised against this repair but customer insists. Installed new Cusotmer provided felt seal with customer provided Heat temperature glue. Re assembled unit . Ran unit check for several seconds before tuning off to let glue dry.advised customer new felt seal may squeak until broken in . Unit check is ok.
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Canton, NC 28716
Kari
Job Details: 07/16/2024
"Took quick pics, found. Correct voltage to unit and inside light coming on. Found unit had old knob and it was cracked. Installed new knob with longer shaft. Put unit on timed dry and started. Unit is heating and tumbling. Unit checks ok; used 1 W11675852 (Knob) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ
Near Easley, SC 29642
Larry M.
Job Details: 07/16/2024
Unit would not cycle icemaker. Verified water source and correct temperature. ; ordrng 1 Wpw10300022 (Ice maker)
We serviced a
WHIRLPOOL DISHWASHER
Model WDP560HAMB0
Near Pickens, SC 29671
Frank
Job Details: 07/16/2024
Replaced sump and motor tested cycle working no leaks detected ..
We serviced a
WHIRLPOOL OVEN
Model WFG525S0JZ5
Near Taylors, SC 29687
Chris
Job Details: 07/16/2024
"Bake ignitor doesnt spark . Replaced ignitor , same result. ordering for repair ; ordrng 1 W11524031 (Ignitor) and 1 W11449506 (Regulator) and 1 W11620559 (Control) and 1 WPW10475149 (Module) and 1 W11162730 (Spark module) and 1 W11645866 (Hadness)"
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Greer, SC 29651
Chris
Job Details: 07/16/2024
Installed new parts. Unit check is ok.
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS00
Near Greer, SC 29651
Chris
Job Details: 07/16/2024
Unit has shorted led . Ordeing for repair ; ordrng 1 W11565237 (Lights) and 1 W11226500 (Lights) and 1 W11226500 (Light)
We serviced a
JENN-AIR DISHWASHER
Model JDPSS246LL1
Near Greer, SC 29651
Chris
Job Details: 07/16/2024
Customer states unit was bought off market place. Customer not original owner. Unit is installed in a garage. Unit has 120 at terminal block but not at control. Suspect broken harness. Ordeing parts for repair ; ordrng 1 W11632707 (Control) and 1 W11213034 (Harness) and 1 W11084867 (Harness) and 1 W11632700 (Console)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Pickens, SC 29671
Frank
Job Details: 07/16/2024
Inside freezer iced up again.. gap in seal heated molded.. sealing better. May need new door seal..
We serviced a
WHIRLPOOL REFRIGERATOR
Model krfc300ess10
Near Easley, SC 29640
Carl
Job Details: 07/16/2024
Installed new ui programmed in code cycled unit got good temp unit ck ok
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Lyman, SC 29365
Chris
Job Details: 07/16/2024
"Unit has f8 e4 fault stored. Customer states suds and water were on the floor and unit began chiming. Ran diagnostics service cycle . Unit began over sudsing immediately with no soap added as shown in pictures, recommend customer use afresh cleaning tablets every 30 days. No leaks from any component"
We serviced a
WHIRLPOOL DRYER
Model WED9450WL0
Near Campobello, SC 29322
Chris
Job Details: 07/16/2024
Unit needs dryer repair kit and hinge. Door hinge is broken. Unit has broke tabs on trim . Gave customer a bluebook estimate for repair for repair kit at $426.55. Installed new parts. Unit check is ok
We serviced a
MAYTAG WASHER
Model MVW6230HW0
Near Arden, NC 28704
Brian
Job Details: 07/16/2024
Issue occurred after power outage. Found unit getting proper voltage but no response from control or user interface. New main Control (W11543994) and user interface (W11478524) needed. Quoted customer 1000.95 to complete repairs. Customer did not wish to proceed with repairs at this time. Collected 150 for service call.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Hendersonville, NC 28739
Brian
Job Details: 07/16/2024
"Installed new freezer evaporator fan. Tested and found fan no longer shorting out unit. Tested ice maker and all other functions. At this time, all operations ok with no leaks detected."
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706ESS05
Near Hendersonville, NC 28792
Brian
Job Details: 07/16/2024
"Installed new ice maker and filter compartment harnesses. Tested ice maker and all other functions. At this time, all operations ok with no leaks detected. Did not move unit."