We serviced a
AMANA WASHER
Model NTW4519JW2
Near Greenville, SC 29611
Larry M.
Job Details:
05/13/2025
Replaced control board. Ran test cycle. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Easley, SC 29640
Matt
Job Details:
05/13/2025
Found out tub leaking near drain pump. Will order.; ordrng 1 W10371566 (Outer tub) and 1 X20jobcode (X20 job code)
We serviced a
WHIRLPOOL WASHER
Model AZ
Near Simpsonville, SC 29681
Carl
Job Details:
05/13/2025
Ran diagnostics found error code for long fill and a bad clutch l14; ordrng 1 W11173599 (Valve) and 1 L14 (Labor) and 1 W10754448 (Clutch)
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRD13254H0
Near Simpsonville, SC 29681
Carl
Job Details:
05/13/2025
Found unit has a seal system issue with the back panel starting to rust out advised customer of issue and cost and age customer is not going to repair unit
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRMF3636RZ00
Near Pendleton, SC 29670
Frank
Job Details:
05/13/2025
Switch frozen. Defrosted Switch started light working...
We serviced a
KITCHENAID ICE MACHINE
Model KUID508HPS01
Near Seneca, SC 29678
Frank
Job Details:
05/13/2025
Need email. Finding cool plate not getting cold. Condenser fan running. Compressor not running. Ordering Compressor for replacement...; ordrng 1 Jobcodex20 (Job code x20) and 1 Sealedsystem (Sealed system tech) and 1 R134a (R134a) and 1 W11735041 (Compressor) and 1 W10843121 (Drier) and 1 Accessport (Access port) and 1 WPW10218037 (Evaporator)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Liberty, SC 29657
Frank
Job Details:
05/13/2025
Unit stuck in drain mode.. need control; ordrng 1 W11603810 (Control) and 1 Jobcodef12 (Job code f12)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDBM00
Near Seneca, SC 29678
Frank
Job Details:
05/13/2025
Cycled imk.. not making water valve kick on. Need to order imk bb quoted $484.44. Replaced bulb in microwave. Not repairing imk at this time.; used 1 8206232a (Bulb) from stock
We serviced a
KITCHEN AID RANGE
Model KSEG950ESS2
Near Spartanburg, SC 29306
Sam
Job Details:
05/13/2025
Found unit not wanting to turn bake on. Necked broil and bake separately units broil works but bake does not. Will order bake element.; ordrng 1 W10779716 (Bake element) and 1 L14 (L14)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Greer, SC 29651
Chris
Job Details:
05/13/2025
"Unit has kinked waterline, inside door hinge keeping door from fully closing calls and moisture buildup inside cabinet. Uninstall door and rerouted waterline reinstall door unit check is OK . New auth is w1e3ja1nl1.5"
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706ESS04
Near Greer, SC 29651
Chris
Job Details:
05/13/2025
Installed new parts. Unit check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ03
Near Greer, SC 29650
Chris
Job Details:
05/13/2025
Installed light. Unit check is ok
We serviced a
KITCHENAID MW OVEN COMBO
Model KOEC530PSS00
Near Greer, SC 29651
Chris
Job Details:
05/13/2025
Found invertor unplugged. Re seated connection. Unit check is ok . New labor authorization is k1e3980nl2
We serviced a
KITCHENAID OVEN
Model KFGD500ESS12
Near Greenville, SC 29615
Chris
Job Details:
05/13/2025
Installed new parts. Unit check is ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW2
Near Walhalla, SC 29691
Frank
Job Details:
05/13/2025
"Found unit not filling with water? Filled manual, motor working ok. Found supply valve not letting in water.; O-emld tckt"
We serviced a
WHIRLPOOL WASHER
Model WTW8500DC0
Near Chesnee, SC 29323
Sam
Job Details:
05/13/2025
"Installed new lid and hinge. Cycled unit through quick test cycle. All components working. Units lid secure, Opens and closes properly. All functions pass."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Candler, NC 28715
Kari
Job Details:
05/13/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Candler, NC 28715
Kari
Job Details:
05/13/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL DRYER
Model WED4850HW0
Near Spartanburg, SC 29307
Sam
Job Details:
05/13/2025
Found unit not stopping cycle. Unit heats and tumbles but does not progress timer. Unit will need new timer for repair. Will order.; ordrng 1 WPW10436303 (Timer) and 1 L14 (L14)
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS3
Near Gaffney, SC 29340
Sam
Job Details:
05/13/2025
"Installed dispenser and control. Cycled unit through diagnostic cycle. Units dispenser door now opening. Unit washing, heating and draining. All functions pass."
We serviced a
WHIRLPOOL DISHWASHER
Model mdb4949skz3
Near Easley, SC 29640
Matt
Job Details:
05/13/2025
Found dishwasher leaking from multiple locations. Found dishwasher leaking from left rear seam and inner door. Will order.; ordrng 1 W11559689 (Inner door) and 1 X20jobcode (X20 job code) and 1 W11409865 (Tub)
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Candler, NC 28715
Brian
Job Details:
05/13/2025
"Installed new inlet valve. Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Asheville, NC 28803
Brian
Job Details:
05/13/2025
"Installed new control. Calibrated and tested unit. At this time, all operations ok with no leaks detected."
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Gaffney, SC 29340
Sam
Job Details:
05/13/2025
Found unit will not turn off after desired period of time when set on timed dry. Timer not rotating and ending cycle unit just continues to cycle. Unit heats and tumbles like normal. Unit will need new timer. Will order timer for repair.; ordrng 1 W11685947 (Timer) and 1 L14 (L14)
We serviced a
JENN-AIR OVEN
Model JJW2430DP02
Near Salem, SC 29676
Frank
Job Details:
05/13/2025
F2e1 code needs console W11236887. Bb quoted1497.24 paying tc 150$
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDEM01
Near Greenville, SC 29615
Nathan
Job Details:
05/13/2025
When arriving I noticed three way valve clicking. Unplugged dc components to see if anythings loading down unit. LED lights are all out and theres no compressor or fans on. After unplugging and plugging back in refrigerator it came back to life. Let homeowner know that in this situation when theres no lights or fans working we order the control board just to start and if it ends up being other parts then itll cost more than the refrigerator. Control boards usually around $700 for this style refrigerator. Let homeowner know if the same exact symptoms occur it would be better to get a new refrigerator. This refrigerator is out of regular and compressor warranty and a compressor issue would exceed the cost of a new refrigerator. Everythings performing as designed now. Should take about 12 hours to get back down to correct temperature. Office will send receipt for trip fee after card is charged $150.00 thank you.
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Mauldin, SC 29662
Nathan
Job Details:
05/13/2025
Called homeowner to come out to look at washer. Explained that when cycle is done control board turns on pump and wont allow washer to start another cycle. ACU isnt in stock but well sneak into schedule once we receive it in stock. Office will call and schedule return visit. ; ordrng 1 W11603811 (ACU) and 1 F12laborcode (F12 labor code) and 1 GiveparttoNathantosneakin (Give part to Nathan to sneak in)
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAMS0
Near Simpsonville, SC 29680
Jerry D.
Job Details:
05/13/2025
"F2 code, Needs console, Estimate, 562.00 , customer thinking, charge cc 150.00"
We serviced a
JENN-AIR REFRIGERATOR
Model JF42NXFXDE05
Near Salem, SC 29676
Frank
Job Details:
05/13/2025
43 degrees in fc. 0 IN Freezer .. found icing up coming into fridge evap. Could be leak of restriction.; ordrng 1 Jobcodex20 (Job code x20) and 1 Sealedsystemtech (Sealed system tech) and 1 W11649687 (Evaporator) and 1 W11557671 (Compressor) and 1 Drier (Drier) and 1 Accessport (Access port) and 1 R600a (R600a)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Pickens, SC 29671
Frank
Job Details:
05/13/2025
Found unit stuck in drain mode.. needs new board ; ordrng 1 W11603810 (Control) and 1 Jobcodef12 (Job code f12)
We serviced a
KITCHEN AID RANGE
Model KSGG700ESS1
Near Simpsonville, SC 29681
Jerry D.
Job Details:
05/13/2025
"Ordering interface, j13; ordrng 1 W10901124 (Console)"
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Simpsonville, SC 29681
Jerry D.
Job Details:
05/13/2025
Installed listed parts cycled unit through test and all functions are working properly
We serviced a
KITCHENAID COOKTOP
Model KFEG500ESS7
Near Simpsonville, SC 29681
Jerry D.
Job Details:
05/13/2025
Installed listed parts cycled unit through test unit checks okay
We serviced a
WHIRLPOOL RANGE
Model WFE525S0JS1
Near Fountain Inn, SC 29644
Jerry D.
Job Details:
05/13/2025
Installed listed parts cycled unit through test and unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHW01
Near Easley, SC 29640
Frank
Job Details:
05/13/2025
Replaced evap fan. Tested working as designed
We serviced a
KITCHEN AID MW OVEN COMBO
Model KOCE500ESS22
Near Simpsonville, SC 29681
Carl
Job Details:
05/13/2025
Installed new acu and mag tube cycled unit to ck operation unit ck ok
We serviced a
MAYTAG DRYER
Model MEDC300XW0
Near Travelers Rest, SC 29690
Larry M.
Job Details:
05/13/2025
Replaced timer and start relay. Ran test cycle. All functions pass.
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS3
Near Travelers Rest, SC 29690
Larry M.
Job Details:
05/13/2025
Found unit not draining. Unplugged sink drain. Ran test cycle. All functions pass
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS3
Near Greenville, SC 29609
Larry M.
Job Details:
05/13/2025
Found control board shorting out. Will order. ; ordrng 1 W11629911 (Control board) and 1 J13jobcode (J13 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Easley, SC 29642
Matt
Job Details:
05/13/2025
"Found unit has lid lock that would not unlock. Replaced lid lock, checked operation, checks o.k"
We serviced a
MAYTAG WASHER
Model MVW7232HC2
Near Easley, SC 29640
Matt
Job Details:
05/13/2025
Put unit in diagnostics and found F0e5 error ( out of balance). Customer started unit started washing with no water. Recalibrated control and ran a quick wash cycle with a load. All functions pass.
We serviced a
WHIRLPOOL DOUBLE WALL OVEN
Model WOD51EC0HS20
Near Greenville, SC 29605
Nathan
Job Details:
05/13/2025
F6E4 communication mismatch. Already replaced all control boards and another company replaced the appliance manager again. Says it was working better but still not working right. Boyd file number 7741558460 says to call trade care and let them know the unit wasnt working since new and that homeowner will have to go through them to either swap out or give repair concessions. Whirlpool isnt covering anymore part replacements due to oven being a scratch and dent model. Waited on hold for trade care to see how they want to proceed. 1866-233-8547 (trade care number file number 7741558460) Whirlpool trade care says that homeowner has to call trade care to see if the unit is covered under warranty.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ15
Near Greenville, SC 29609
Nathan
Job Details:
05/13/2025
Unit was unplugged when I arrived. Plugged in unit and compressor is locked up pulling locked rotor amps. Ordering sealed system components and office will schedule return visit when parts arrive. ; ordrng 1 W11547313 (Compressor) and 1 W11550396 (Evaporator) and 1 Processstub (Process stub) and 1 W11109499 (Drier (only if still in small van)) and 1 W11504447 (Drier to capillary tube union) and 1 W11504423 (Evap coupler) and 1 W11504415 (Suction tube to compressor) and 1 X20laborcode (X20 labor code (have to remove doors to get behind refrigerator))
We serviced a
WHIRLPOOL ICE MACHINE
Model GI15NDXZB0
Near Greenville, SC 29601
Larry M.
Job Details:
05/13/2025
Found water valve not working properly. Will order ice maker and control board. ; ordrng 1 W11034363 (Control) and 1 W10881366 (Valve) and 1 N14jobcode (N14 job code)
We serviced a
WHIRLPOOL RANGE
Model WFE525S0JS4
Near Gaffney, SC 29341
Sam
Job Details:
05/13/2025
Installed light assembly and bulb to unit. Cycled units light by opening and closing door. Units light comes on and goes off as directed to. All functions pass.
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Gaffney, SC 29341
Sam
Job Details:
05/13/2025
Pulled unit out and adjusted drier filter position per whirlpool. Reinstalled unit to wall. Checked all components in diagnostics. Cycled every component. Noise could not be duplicated. Called techline. Techline stated that based on adjustment of filter to see if that took care of issue seeing as units noise cannot be duplicated at time of visit.
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS05
Near Fountain Inn, SC 29644
Jerry D.
Job Details:
05/13/2025
"Temps 36@1, water ok, Imk broken, ordering, j13; ordrng 1 W11130444 (Imk)"
We serviced a
KITCHENAID RANGE
Model KSGG700ESS7
Near Waynesville, NC 28785
Kari
Job Details:
05/13/2025
"Took quick pics, found unit not heating properly checked temp and found it never gets above 323 but beeps that its at 350. Need control and sensor for repair ; ordrng 1 W10833885 (Sensor) and 1 W11685628 (Control main) and 1 Q16 (Job code)"
We serviced a
MAYTAG WASHER
Model MVW7230HC1
Near Easley, SC 29640
Larry M.
Job Details:
05/12/2025
Found slider making noise. Will order slider ; ordrng 1 W10754448 (Clutch) and 1 W10734521 (Slider) and 1 N14jobcode (N14 job code)
We serviced a
WHIRLPOOL OVEN
Model WFG320M0MS0
Near Greer, SC 29651
Chris
Job Details:
05/12/2025
Installed control for f1 fault . Unit Check is ok
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Leicester, NC 28748
Kari
Job Details:
05/12/2025
Installed parts unit checks ok ; used 1 W11239857 (Belt) from stock
We serviced a
WHIRLPOOL M/W OTR
Model WMMF7330RZ00
Near Piedmont, SC 29673
Jerry D.
Job Details:
05/12/2025
"Installed listed parts, cycled unit through test 3 times no codes, and all functions are working properly"
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Hendersonville, NC 28739
Brian
Job Details:
05/12/2025
Installed new start switch. Tested and found all operations ok at this time.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT710PAHZ1
Near Greer, SC 29651
Chris
Job Details:
05/12/2025
Installed new parts. Unit check is ok . No leaks
We serviced a
WHIRLPOOL DISHWASHER
Model WDF332PAMS0
Near Simpsonville, SC 29680
Jerry D.
Job Details:
05/12/2025
"Installed listed parts, cycled unit through test and no leaks found unit chks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ12
Near Weaverville, NC 28787
Kari
Job Details:
05/12/2025
"Took quick pics, found units left door not closing because the mullion wont catch in the channel itself. Found unit was rocking on floor, pulled unit out and put a shim under back right corner and leveled front left leg until mullion catches channel properly, unit checks ok ; used 1 4387828A (Shim) from stock"
We serviced a
WHIRLPOOL RANGE
Model WFG550S0LZ4
Near Pendleton, SC 29670
Frank
Job Details:
05/12/2025
Repaired wire for ignitor.. tested unit working as designed ..
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Anderson, SC 29621
Frank
Job Details:
05/12/2025
"4 3 motor error, replaced motor tested working as intended ."
We serviced a
MAYTAG WASHER
Model MVWP575GW0
Near Greenville, SC 29609
Larry M.
Job Details:
05/12/2025
Found gearcase leaking. Quoted customer $810 for gearcase and actuator. Customer declined
We serviced a
WHIRLPOOL WASHER
Model WFW8620HC4
Near Simpsonville, SC 29680
Carl
Job Details:
05/12/2025
Found Outter tub cracked u 18; ordrng 1 W11378552 (Tub assembly) and 1 U18 (Labor)
We serviced a
WHIRLPOOL OVEN
Model WEG745H0LZ5
Near Inman, SC 29349
Sam
Job Details:
05/12/2025
Installed regulator per whirlpool recommendation. Cycled unit. Units bake and broil still not operating. Called techline. Techline had me go over checks. Stated failure has to be at DSI board. Will order another DSI board. ; ordrng 1 W10860916 (Module spark) and 1 L14 (L14)
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Boiling Springs, SC 29316
Sam
Job Details:
05/12/2025
Found unit has built up water in bottom of refrigerator section. Dethawed ice and cleared p trap in back of unit. Removed ice and cleaned up excess water. Drain now clear in refrigerator section and p trap no longer clogged. All functions pass.
We serviced a
KITCHENAID REFRIGERATOR
Model KSF26C6XYYO4
Near Simpsonville, SC 29680
Carl
Job Details:
05/12/2025
Found fan receiving voltage and thurmister q16; ordrng 1 WPW10451893 (Fan scroll) and 1 WPW10451893 (Thurmister) and 1 Q16 (Labor)
We serviced a
KITCHENAID MICROWAVE/HOOD
Model KOEC530PSS01
Near Simpsonville, SC 29681
Carl
Job Details:
05/12/2025
Installed new shaft turn for plate cycled unit to ck operation unit ck ok
We serviced a
WHIRLPOOL MICROWAVE
Model WOC54EC0HS04
Near Greer, SC 29651
Matt
Job Details:
05/12/2025
Helped RC on this.
We serviced a
WHIRLPOOL M/W OTR
Model WMMF7330RZ00
Near Spartanburg, SC 29301
Sam
Job Details:
05/12/2025
"Customer stated unit will randomly stop working, units door user interface will dim and unable to use anything on the machine and it will randomly come back. Called techline. Techline stated units door is possibly causing voltage drop out and recommends to replace door. Will order door.SR#7741552733; ordrng 1 W11731160 (Door) and 1 L14 (L14)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Moore, SC 29369
Sam
Job Details:
05/12/2025
Found unit not operating pump. Found unit not recirculating water to clean. Checked error codes. Found f4e3. Ran unit through diagnostics. Found unit leaking at diverter. Will order pump and motor for repair.; ordrng 1 W11613479 (Pump and motor) and 1 L14 (L14)
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW2
Near Weaverville, NC 28787
Kari
Job Details:
05/12/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Greenville, SC 29605
Nathan
Job Details:
05/12/2025
Has f4E3 error code which states it needs a sump and motor assembly. Replaced sump assembly and tested for leaks and heater operation. Heater amps out past 9 amps which indicates its working. Sent homeowner a picture about using rinse-aid for better drying results. Everythings performing as designed. Thank you!; ordrng 1 W11613479 (Sump and motor assembly)
We serviced a
MAYTAG DRYER
Model MEDB765FW0
Near Weaverville, NC 28787
Kari
Job Details:
05/12/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Etowah, NC 28729
Brian
Job Details:
05/12/2025
Found filter head ejection arm out of position and not pushing filter out. Inspected and found arm support out of place. Put support back in place and secured. Filter will now eject. I recommended customer replace filter head because I cannot guarantee the support will stay. Quoted customer 499.12 to replace Filter housing (W11162042). Customer did not wish to proceed with repairs at the time. Collected 150 for service call.
We serviced a
WHIRLPOOL OVEN
Model JMW3430WS02
Near Greenville, SC 29601
Larry M.
Job Details:
05/12/2025
Lower cooling fan error code. Part unavailable W10213812
We serviced a
KITCHEN AID REFRIGERATOR
Model KSSC42QVS03
Near Greenville, SC 29605
Nathan
Job Details:
05/12/2025
Refrigerator will only run when fc evaporator fan is unplugged. Called tech line and he said to order main board and fc evaporator fan is unplugged. Robert says replace main board on service pointer along with evaporator fan motor. Quote to replace control board is $1005.74 freezer fan is covered under warranty still. Paid half $502.87 today and $502.87 when job is complete. Office will call and schedule return visit when parts arrive. ; ordrng 1 W11671461 (Re-order under warranty fc evaporator fan) and 1 W10789107 (Control board assembly) and 1 L14laborcode (L14 labor code) and 1 GivepartstoNathantotryandsneakinschedule (Give parts to Nathan to try and sneak in schedule)
We serviced a
WHIRLPOOL REFRIGERATOR
Model ED2VHEXVB01
Near Mauldin, SC 29662
Nathan
Job Details:
05/12/2025
Replaced shut off arm and tested operations. Everythings performing as designed.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM08
Near Piedmont, SC 29673
Frank
Job Details:
05/12/2025
Found back iced up.. defrosted repaied wire.. checking ok at this time
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ02
Near Greer, SC 29650
Matt
Job Details:
05/12/2025
Found customer has replaced filter with the correct filter. The filter head does not seal of properly. Will order new filter head assembly; ordrng 1 J13jobcode (J13 job code) and 1 W11346623 (Filter head) and 1 Anytech (Any tech)
We serviced a
WHIRLPOOL WASHER
Model WFW9700VW00
Near Taylors, SC 29687
Chris
Job Details:
05/12/2025
Found obstructions in pump. Removed obstructions. Unit check is ok . No leaks
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3236RZ00
Near Asheville, NC 28804
Kari
Job Details:
05/12/2025
"Took quick pics, found the damper making noise and the door isnt always opening or closing consistently. Need part for repair ; ordrng 1 WPW10594329 (Damper) and 1 J13 (Job code)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF536RPS01
Near Greenville, SC 29609
Matt
Job Details:
05/12/2025
Found million has moisture build up. Went into diagnostics and turned on vertical and horizontal million heaters. Checked for air leaks at door seals.All seals are sealed up properly.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDB0
Near Taylors, SC 29687
Nathan
Job Details:
05/12/2025
Replaced thermistor in freezer for defrosting issues. Everything should be performing as designed.
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Easley, SC 29640
Larry M.
Job Details:
05/12/2025
Replaced main control. Ran test cycle. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW8040DW4
Near Greenville, SC 29615
Nathan
Job Details:
05/12/2025
"Replaced lid for . Replaced gear case,wash plate, New tub,and had to cut spanner nut . Cleaned all residue from outer tub after removing old wash basket. Calibrated and tested and everythings performing as designed."
We serviced a
WHIRLPOOL MW OVEN COMBO
Model WOC54EC0HS20
Near Seneca, SC 29678
Frank
Job Details:
05/12/2025
Replaced control and console tested unit working Heating as intended.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ18
Near Greenville, SC 29607
Matt
Job Details:
05/12/2025
Data logger information customer provided. Average 10.6 minimum 3 highest was 23 for the past month. 6 degrees freezer temperature fresh food temperature is 38.Compressor pulling .84 amps. Called tech line and spoke to Robert. Tech line recommended putting our own data loggers in and make sure they are secured between packages for proper package temperature. File 7741317735.; ordrng 2 Dataloggers (Data loggers)s
We serviced a
JENN AIR RANGE
Model JES9750CAS01
Near Duncan, SC 29334
Matt
Job Details:
05/12/2025
Replaced right front switch. Set unit to high and let it get red then turned it down to make sure unit turns down properly. Right front burner now operates correctly on every setting.Office to run card for the $216 balance.
We serviced a
WHIRLPOOL DRYER
Model WED500CMW0
Near Duncan, SC 29334
Chris
Job Details:
05/12/2025
Unit has bad motor . Ordering for repair ; ordrng 1 WPW10396039 (Motor) and 1 W10801999 (Wheel) and 1 N15
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Greenville, SC 29607
Carl
Job Details:
05/12/2025
Installed new spluch and shifter cycled diagnostics and a test cycle to ck operation unit ck ok
We serviced a
KITCHENAID RANGE
Model KSEG950ESS2
Near Greenville, SC 29609
Carl
Job Details:
05/12/2025
"Installed new ui,sis and acu cycled unit to ck operation unit ck ok"
We serviced a
MAYTAG WASHER
Model MVW6200KW0
Near Asheville, NC 28804
Brian
Job Details:
05/12/2025
Found f7e4 (Basket reengineer failure) and F7e3 (basket engaged during wash). Tested shifter and found it out of range . New Shifter (W10913953) needed. Quoted customer 399.94 to complete repairs. Customer did not wish to proceed with repairs at this time. Collected 150 for service call.
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF707ESS01
Near Hendersonville, NC 28791
Brian
Job Details:
05/12/2025
"Installed all parts ordered. Tested and found all functions ok at this time, with no leaks detected."
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS3
Near Waynesville, NC 28786
Kari
Job Details:
05/12/2025
"Took quick pics, found unit not heating found capacitor checking good and found power supply good will need parts for repair. ; ordrng 1 W10754299 (Magnetron) and 1 W10836753 (Transformer) and 1 W11256462 (Diode) and 1 Q16 (Job code)"
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Hendersonville, NC 28791
Brian
Job Details:
05/12/2025
"Installed new lid latch and lower wire harness. Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ5
Near Piedmont, SC 29673
Jerry D.
Job Details:
05/12/2025
Installed listed parts cycled unit at 350 and then 400. And unit chks okay
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Easley, SC 29640
Larry M.
Job Details:
05/12/2025
Replaced control board. Ran test cycle. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS335SDHM07
Near Greer, SC 29651
Chris
Job Details:
05/09/2025
Customer states styrofoam came out of ice dispenser . Found packing foam around auger shaft. Packing foam wasnt removed by builder . Cleaned ice bin and removed all packing foam. Unit check is OK.called saftey and spoke with Alicia. . File number for call is 7741540048
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Asheville, NC 28801
Brian
Job Details:
05/09/2025
Unit unplugged when I arrived. Plugged unit in and found drain pump coming on. Let pump time out. Entered diagnostic and found f8e1 (long fill) f3e1 (pressure system fault). Checked and found pressure hose ok. Water is entering unit properly. Found service pointer for this issue. Main control (W11608056) and 4 Wire tie (w11390781) needed. ; ordrng 4 w11390781) (Zip tie)s and 1 W11608056 (Control) and 1 J13 (Job code)
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW
Near Fountain Inn, SC 29644
Carl
Job Details:
05/09/2025
Installed new acu ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ00
Near Simpsonville, SC 29680
Carl
Job Details:
05/09/2025
Pulled cap tube from evaporator installed a new dryer filter only uncapping the cap tube end and pressurized with nitrogen could not clear cap tube. Called tech line gave past info and what I had done today and deemed it not repairable sr# 7741540606
We serviced a
MAYTAG DISHWASHER
Model MDB8989SHB
Near Travelers Rest, SC 29690
Matt
Job Details:
05/09/2025
"Put unit in diagnostics and found error codes. 1-2,6-1,. During test main motor just hums and does not run. Replaced sump/ motor assembly. Tested operation and all functions pass."
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Greenville, SC 29605
Nathan
Job Details:
05/09/2025
"Replaced lower harness,ACU, and gear case. Pressure switch issue with the control. Drain pump issue for the harness. Gear case for oil leaks. Calibrated and tested operations. Everythings performing as designed."