We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Greenville, South Carolina 29607
Nathan
Job Details:
08/07/2025
Quoted $626.22 to replace ice maker which is blue book estimate. Ice maker motor went bad.tried test button and motor didnt even try to move. Tested 120 volts to ice maker molex plug. Homeowner says she has additional Costco warranty and Costco will reimburse total to homeowner after she pays us. Replaced ice maker and tested operations. Everythings performing as designed now. Takes about 3 days to fill up ice bucket.
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Anderson, South Carolina 29626
Jerry D.
Job Details:
08/07/2025
Installed listed prts cycled unit through test and unit chks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ17
Near Greenville, South Carolina 29607
Carl
Job Details:
08/07/2025
Found water spout was leaking but also missing the tube and clamp that doesnt allow water to spill over j13; ordrng 1 W11605929 (Water chute) and 1 W10329003 (Clamp) and 1 2181939 (Tube)
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Spartanburg, South Carolina 29303
Sam
Job Details:
08/07/2025
"Installed new valve. Cycled unit through calibration, diagnostic test cycle and quick wash. All components activating. Unit filling with water now. Unit progressing cycle. All functions pass."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Boiling Springs, South Carolina 29316
Sam
Job Details:
08/06/2025
Found units water filter stuck in housing. Eventually removed filter after proper placement of pressure on filter and housing. Inspected housing. Housing appears to be in working order. Inspected filter found filter to be faulty and got stuck. Recommended changing filter. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Anderson, South Carolina 29624
Jerry D.
Job Details:
08/06/2025
"Unit already pulled out, Customer states unit leaked a week after using it, she got up one morning and there was water on the floor around washer, washer had not been used for a week, valves amd hoses ok, notcycled unit through test no leaks found cycled unit through wash cycle, no leaks found unit is level and stable, customer doesnt see leak either, she will monitor , unit chks ok at this time"
We serviced a
WHIRLPOOL DRYER
Model WED8127LW
Near Marshall, North Carolina 28753
Kari
Job Details:
08/06/2025
"Took quick pics, found unit will cut off in less than 5 minutes on sesnor cycles but runs fine on timed dry. Found unit had 3-2 sesnor harness open. Installed new sensor harness unit checks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Marshall, North Carolina 28753
Kari
Job Details:
08/06/2025
"Took quick pics, found unit running in a safety loop. Found control has 1-1 internal board error and 3-1 pressure sensor error. Cleared codes and as soon as I turned knob it started safety loop again. When that finished I checked pressure hose for kinks or blockages and it is open and clear. I put into diagnostic cycle and it ran that and finished, immediately when it was done got stuck back into safety loop And repeats the 1-1 and 3-1 codes. Installed new control ran diagnostic cycle. Unit checks ok"
We serviced a
WHIRLPOOL FREEZER
Model WZF34X20DW06
Near Easley, South Carolina 29640
Carl
Job Details:
08/06/2025
Found compressor locked up x20 long job; ordrng 1 W11547313 (Compressor) and 1 W11506635 (Charge port) and 1 W11504420 (Coupler) and 1 W11504431 (Coupler) and 1 W11506622 (Coupler) and 1 X20 (Labor)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ17
Near Easley, South Carolina 29642
Carl
Job Details:
08/06/2025
Compressor locked up x20 long job ; ordrng 1 W11580057 (Compressor) and 1 W11504415 (Coupler) and 1 W11504431 (Coupler) and 1 W11506619 (Coupler) and 1 Vx4 (Charge port) and 1 X20 (Labor)
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Anderson, South Carolina 29621
Jerry D.
Job Details:
08/06/2025
"Called mrs and she stated console is vibrating and would like it replaced , ordering, j13; ordrng 1 W10692607 (Console) and 1 W10520780 (End cap) and 1 W10520782 (End cap)"
We serviced a
WHIRLPOOL DRYER
Model WED8127LC2
Near Anderson, South Carolina 29621
Jerry D.
Job Details:
08/06/2025
"Called mr he is not home for a while, he stated unit worked good for 2 weeks now its doing the same thing , motor runs approximately 3 seconds and then shuts off, called t line. David, i explained to him everything i chkd Last time, t line. replace wire harness and motor and control ; ordrng 1 8557403 (Thermostat) and 1 8577274 (Thermistor) and 1 W11492434 (Motor) and 1 W11164041 (Harness) and 1 W11562730 (Console) and 1 W11577203 (Cntrl)"
We serviced a
KITCHENAID OVEN
Model KOEC530PSS00
Near Fountain Inn, South Carolina 29644
Carl
Job Details:
08/06/2025
Ran diagnostics found temp probe out in range and Elmnt receiving voltage calibratied temp unit ck ok
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFC704FPS06
Near Greenville, South Carolina 29617
Nathan
Job Details:
08/06/2025
Soaked gasket in water for a few minutes to make gasket plyable and put on door. Steamed out imperfections and let homeowner know to leave door closed for 3-4 hours to let gasket form to cabinet. Wrinkles will go away in a few weeks. Everythings as designed now.
We serviced a
MAYTAG DRYER
Model MED6230HC4
Near Greenville, South Carolina 29617
Nathan
Job Details:
08/06/2025
"Replaced all parts associated with noise issues, and tightened all screws. Let homeowner know to let dryer run for the rest of the cycle I left it on because of new heater smell. Tested and everythings performing as designed."
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Tryon, North Carolina 28782
Brian
Job Details:
08/06/2025
"Found unit unplugged when I arrived. Plugged unit in and found drain pump coming on. Let pump time out and found same results. Found pressure hose ok. Installed new control (w11607637). Calibrated and tested unit. At this time, all operations ok with no leaks detected."
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Hendersonville, North Carolina 28792
Brian
Job Details:
08/06/2025
Found f8e1 (long fill) error codes. Tested unit and found cold water not entering unit. All other functions ok at this time. New Valve (W11210463) needed. ; ordrng 1 W11210463 (Valve) and 1 J13 (Job code)
We serviced a
MAYTAG WASHER
Model MVWB865GW0
Near Pelzer, South Carolina 29669
Jerry D.
Job Details:
08/06/2025
"Customer house stinks bad strong ammonia smell urine and feces. On floors was inside about ann hour and got a bad headache from ammonia, stepped in puke on side walk not going back in house but washer still needs work, Couldnt get bolt out of rotor with impact gun , tips breaking off, cannot remove agitator , rusted, cover missing, ordering, q16; ordrng 1 Q16 (Q16) and 1 W10821990 (Agitator) and 1 W10636382 (Screw) and 8 W10644129 (Screw need 8)s and 1 W10676061 (Cover)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF305ESS09
Near Lake Lure, North Carolina 28746
Brian
Job Details:
08/06/2025
"Test cycled ice maker and found it completing cycle but not filling. Tested and found water not dispensing. Removed filter and tested. Found water now dispensing and ice maker filling. Recommended customer replace water filter. Customer understands. Filter part number is (EDRARXD1). At this time, no leaks detected. Did not move unit."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ19
Near Lake Lure, North Carolina 28746
Brian
Job Details:
08/06/2025
"Installed all parts ordered. Tested water dispenser snd ice maker. At this time, all operations ok with no leaks or unusual noises detected."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM13
Near Fletcher, North Carolina 28732
Brian
Job Details:
08/06/2025
"Unit has full frost pattern. Tested and found heater coming on, in diagnostic. Fund evaporator/heater fan wire harness, pinched between evaporator cover and evaporator. found freezer fan stalling out. Replaced evaporator fan (wp2315549) and control box (w11546690) and corrected wire harness. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Boiling Springs, South Carolina 29316
Sam
Job Details:
08/06/2025
Found unit not progressing cycles. Found f8e1 error code. Checked cold water and hot water. Water incoming good. Found in cold water valve side filter screen clogged with sediment. Removed sediment and reinstalled filter screen. Cycled unit through quick wash on cold setting. Unit now filling with water and progressing cycle. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Moore, South Carolina 29369
Sam
Job Details:
08/06/2025
"Upon arrival to unit customer stated unit overflowed and flooded floor when cycling one day. Inspected unit. No leaks anywhere at pressure dome or pressure hose. No leak any where at drain line or pump. No leaks at water valve or crack in tub to indicate water leaking. Units issue appears to only be overflowing. Checked unit in diagnostics. Unit has f1e1 and f3e1 error codes for faulty control. Unit has service pointer for error codes present. Service pointer states to replace control. Replaced control per special project S153EB. Cycled unit through calibration, diagnostic test cycle and normal cycle. Unit no longer overflowing. Unit progressing cycle as intended. No leaks anywhere throughout all cycles. All cycles performed perfectly. All functions pass. Customer asked for control for insurance purposes left control with customer. Collected 60.00$ cash for core charge since control is not being returned to whirlpool. Unit checks ok."
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Spartanburg, South Carolina 29307
Sam
Job Details:
08/06/2025
Found unit constantly draining. Checked units error codes. Found f3e1. Checked pressure hose. Pressure hose checks ok. Unit displaying symptoms of faulty control. Replaced control board per special project S153EB. Cycled unit through calibration and diagnostic test cycle. Unit no longer draining constantly in standby. Unit progressing cycle. All components working. All functions pass.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Fletcher, North Carolina 28732
Brian
Job Details:
08/06/2025
"Installed new wash motor. Tested unit multiple times observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Fletcher, North Carolina 28732
Brian
Job Details:
08/06/2025
"Found f5e3 (door unlock failure), which can occur if cycle is started without opening door. Tested door lock and found it functioning normal. Tested unit in diagnostic and found unit completing without issues. I did find ui display illuminated, when not on. Replaced console (w11325569) and tested unit, observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ17
Near Weaverville, North Carolina 28787
Kari
Job Details:
08/06/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Pickens, South Carolina 29671
Frank
Job Details:
08/06/2025
"Replaced motor pump and capacitor, calibrated, tested quick cycle working as intended"
We serviced a
KITCHENAID MICROWAVE
Model KMMF730PPS00
Near Salem, South Carolina 29676
Frank
Job Details:
08/06/2025
"Replaced board and control,, unit operating as intended,, found little dent in door going to re order..; ordrng 1 W11670170 (Door)"
We serviced a
WHIRLPOOL RANGE
Model WFE525S0JS4
Near Lyman, South Carolina 29365
Chris
Job Details:
08/06/2025
Unit has burnt terminal block. Calle saftey and spoke with Amanda .do not proceed with repair. Safety team to reach out to customer . file number for call is 7742129722.
We serviced a
WHIRLPOOL DRYER
Model ="110.63942101"
Near Greer, South Carolina 29651
Chris
Job Details:
08/06/2025
"Unit has multiple failed parts, parts ads discontinued. Called 3rd party . Unit is unrepairable. File number for call is 7742113355"
We serviced a
MAYTAG WASHER
Model MVWB765FW1
Near Greer, South Carolina 29651
Chris
Job Details:
08/06/2025
Unit has major oil leak. Rotor is siezed. Unit also has f6 fault . Unit will need a variety of parts and 2 men for repair . Customer denied estimate
We serviced a
KITCHEN AID RANGE
Model KSEG950ESS2
Near Seneca, South Carolina 29672
Frank
Job Details:
08/06/2025
"Replaced bake element, calibrated, heating good, unit functioning as designed..pd 307.85"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Weaverville, North Carolina 28787
Kari
Job Details:
08/06/2025
"Took quick pics, found unit running in a safety loop. Found control has 1-1 internal board error and 3-1 pressure sensor error. Cleared codes and as soon as I turned knob it started safety loop again. When that finished I checked pressure hose for kinks or blockages and it is open and clear. I put into diagnostic cycle and it ran that and finished, immediately when it was done got stuck back into safety loop And repeats the 1-1 and 3-1 codes. Installed new control unit checks ok"
We serviced a
MAYTAG DRYER
Model MED5430MW0
Near Simpsonville, South Carolina 29681
Carl
Job Details:
08/06/2025
Installed new idler cycled unit with a load unit ck ok
We serviced a
WHIRLPOOL RANGE
Model WFES3530RS0
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/06/2025
"Replaced parts damaged in shipping and missing weight behind oven. Moved tip bracket over,leveled oven,and slid back all the way. Cleaned cooktop before I left to help reduce scratching. Tested burners and everythings performing as designed."
We serviced a
WHIRLPOOL WASHER
Model WET4027HW2
Near Taylors, South Carolina 29687
Chris
Job Details:
08/06/2025
Installed new parts. Unit check is ok
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EFS03
Near Taylors, South Carolina 29687
Chris
Job Details:
08/06/2025
Installed new parts. Unit check is ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Duncan, South Carolina 29334
Chris
Job Details:
08/06/2025
Installed control . Unit check is ok
We serviced a
WHIRLPOOL MICROWAVE
Model WMH31017HS09
Near Spartanburg, South Carolina 29306
Sam
Job Details:
08/06/2025
Found unit not wanting to operate pops up with f1e4 when trying to use unit. Fan works but light and turntable does not. Cycled unit through diagnostics. Found that unit will not heat. Voltage does not make it through switches to rest of machine. One door switch has melted/stuck plunger. Unit acting erratic because of incorrect flow of voltage possible control failure. Explained to customer unit would need many parts. Customer stated they will just go buy a new one instead of spending a lot of money on repairing this one with multiple parts. Collected trip charge of 150.00. Job complete.
We serviced a
WHIRLPOOL OVEN
Model WFC150M0JS4
Near Pauline, South Carolina 29374
Sam
Job Details:
08/06/2025
Customer stated unit makes chirping noise when using bake. Ran bake cycle heard noise customer was talking about. Explained to customer that it was normal and that chirping noise is bake element bracket slightly rubbing against inner cavity of unit when its heating up and cooling down. Explained that noise is normal because when units bake element heats up it will slightly move enough and shift to cause rubbing noise. Inspected other functions of machine. Light working. All key pad buttons working. All burners working. No error codes in diagnostics. Unit checks ok. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model mvw4505mw2
Near Easley, South Carolina 29640
Matt
Job Details:
08/06/2025
"Replaced outer tub, checks okAuthorization. M1ERK91NL1.5"
We serviced a
KITCHEN AID ICE MACHINE
Model KUIX335HPS00
Near Seneca, South Carolina 29672
Frank
Job Details:
08/06/2025
"Found drain line came out of pvc pipe in back causing drain water to run onto the floor, fixed drain hose from unit fitted into pvc pipe on floor, tested drain, good all going into drain line.. tc 150 labor f12 75.00 total $225.00"
We serviced a
KITCHENAID RANGE
Model KSDG950ESS1
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/06/2025
"Quoted $1051.31 to replace control board,oven bottom,and bake element. Bake element is burned up and control board isnt sending 220 volts to either bake or broil element.Thermal fuse checks good. Oven bottom has hole in it caused from bake burner. Has 30 days to accept quote or homeowner would have to pay for trip and diagnostics fee. Homeowners going to check out options on new stoves and let us know whether they would like to repair."
We serviced a
WHIRLPOOL WASHER
Model wtw4816fw3
Near Easley, South Carolina 29640
Matt
Job Details:
08/06/2025
"Replaced inner basket, checks o.k"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/06/2025
"Control not sending voltage to water valve. Ordering ACU,harness,and temp sensor. Flood switch and latch is working. ; ordrng 1 W11637581 (ACU) and 1 W11612329 (Temperature sensor) and 1 W11697034 (Wiring harness) and 1 U18laborcode (U18 labor code)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Maggie Valley, North Carolina 28785
Kari
Job Details:
08/05/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ3
Near Weaverville, North Carolina 28787
Kari
Job Details:
08/05/2025
Didnt need on my schedule already filled out
We serviced a
WHIRLPOOL FREEZER
Model WZF34X16DW10
Near Taylors, South Carolina 29687
Chris
Job Details:
08/05/2025
"Customer states unit has been installed shes lost food 4 different occasions. Customer states when unit is fully loaded door Will not fully close and will bounce back . Unit is half way loaded with temps at 0 degress. Unit is in garage with hotter than normal temps in region lately . Unit is running ok in the past week due to lower temps customer states, Called tech line and spoke David. Unit isnt designed to be in extreme temperatures. Unit needs to be moved indoor in climate controlled area. File number for call is 7742126582"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHB10
Near Taylors, South Carolina 29687
Chris
Job Details:
08/05/2025
Found ice in fill tube. Cleared ice. Unit check is ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Travelers Rest, South Carolina 29690
Nathan
Job Details:
08/05/2025
"Replaced ACU for F3E1 error code. Leveled,calibrated,and tested operations in diagnostics. Performing as designed now. ; ordrng 1 SCodeS153EBPARTS/LABOR(jobcomplete) (SCode S153EB PARTS/LABOR(job complete))"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM7
Near Duncan, South Carolina 29334
Chris
Job Details:
08/05/2025
Unit has shorted ui. Part unavailable. Called third party team. Unit is unrepairable. File number for call is 7742078806
We serviced a
WHIRLPOOL M/W OTR
Model YWMMF7330RZ00
Near Asheville, North Carolina 28804
Brian
Job Details:
08/05/2025
"Found no saved error codes. Customer using oven thermometer in unit to determine temps. Informed customer that that is not a reliable way to determine temps of unit. Tested unit with a cup of water and found it reaching proper temps. Tested features of unit and found them working and responding properly. At this time, unit is functioning as designed. Reviewed unit operations with customer."
We serviced a
FRIGIDAIRE MICROWAVE
Model FGBM19WNVFB
Near Asheville, North Carolina 28804
Brian
Job Details:
08/05/2025
"Customer said the vent fan came on, and they couldnt turn it off even after resetting power, and then unit wouldnt heat. Fan appears to be working correctly at this time. Tested unit and found it pulling 9amps. High voltage components needed. Diode (5304515185) magnetron (5304509470) transformer (5304515184) capacitor (5304523278). Informed customer that there could also be further issues that will result in further charges and repairs. Customer understands. Quoted customer 1521.49. Customer did not wish to proceed with repairs at this time. Collected 150 for service call."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC2
Near Simpsonville, South Carolina 29680
Jerry D.
Job Details:
08/05/2025
"Volts and polarity good unit dead, ordering, j13; ordrng 1 W11577203 (Cntrl) and 1 W11562730 (Fascia)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Simpsonville, South Carolina 29680
Jerry D.
Job Details:
08/05/2025
"Called mr he said lower sprayarm fell off and layed on heater and melted , ordering, j13; ordrng 1 W10518394 (Heater) and 1 W10491331 (Sprayarm)"
We serviced a
WHIRLPOOL RANGE
Model WSGS7530RZ0
Near Piedmont, South Carolina 29673
Jerry D.
Job Details:
08/05/2025
"Installed glass sent preid , unit chks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ
Near Simpsonville, South Carolina 29680
Carl
Job Details:
08/05/2025
Found Imk stalled and damper closed wont open installed new damper and it opened found door gaskets worn n15; ordrng 2 W10830162 (W10830162)s and 1 WPW10503278 (Control) and 1 W10884390 (Imk)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Pelzer, South Carolina 29669
Jerry D.
Job Details:
08/05/2025
Installed listed prts cycled unit through calibration and unit chks ok
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Simpsonville, South Carolina 29681
Carl
Job Details:
08/05/2025
Found strike broken installed new strike and ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
KITCHEN AID DISHWASHER
Model KUDE70FXSS4
Near Greenville, South Carolina 29609
Nathan
Job Details:
08/05/2025
Has multiple error codes but dishwasher seems to run normally. Suggested to keep dishes at least 2 inches from front of racks so water doesnt divert towards corners. Lower spray arm seems like its cracked and homeowner stated it would leak around the ten minute interval which is when the water should be around the hottest it gets and would possibly explain leak. May have intermittent control board and drain pump issues as well as stated by error codes. I recommended keeping dishes away from front of racks by door and if still leaking to try the lower spray arm that seems cracked. Put cell phone in dishwasher while running and spray arms seem to work fine. If it still leaks after trying to keep dishes away and spray arms seem I recommended just replacing dishwasher for cost and age. Thank you!; ordrng 1 C1laborcode (C1 labor code)
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Anderson, South Carolina 29621
Jerry D.
Job Details:
08/05/2025
"Control inoperable, installed cntrl sent preid, restored power cycled unit through test all functions chks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Walhalla, South Carolina 29691
Frank
Job Details:
08/05/2025
Found in drain mode. Replaced control tested cycle working as intended
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/05/2025
"F4E3,F7E1. Needs wash motor W11613479 and heater W10518394. Quote to repair is $524.27. Homeowner needs to call Whirlpool with reference number 7742024290 to see if theyre going to cover repairs. Talked to safety team and gave them information on whats wrong. They didnt say whether they were going to repair so homeowners will have to give them a call. ; ordrng 1 AUTH#W1EM4T1WL1T/DONLY(jobsubmittedtosafetyteam) (AUTH# W1EM4T1WL1 T/D ONLY (job submitted to safety team))"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/05/2025
"Homeowners state dishwasher not cleaning dishes thoroughly or heating like normal. Also said while its plugged in itll randomly trip breakers. Checked power connection and its good. Error code says no heat but getting amperage in test cycle. Ordering control board for false error codes,heater and temp sensor for heat not working in cycles. And wash motor assembly for poor wash performance. After diagnostic cycle heater was still energized.Office will call when parts come in. ; ordrng 1 W11637583 (ACU) and 1 W11613480 (Sump assembly) and 1 W11612329 (Temp sensor) and 1 W10518394 (Heater) and 1 N15laborcode (N15 labor code)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX988SIBH01
Near Greenville, South Carolina 29605
Nathan
Job Details:
08/05/2025
Found frost around left side in freezer. Took refrigerator apart in freezer to run compressor test and evaporator didnt frost up completely even after freezer test. May have sealed system issue. Removed freezer door gasket and sealed perimeter with silicone. Told homeowner to leave door closed until tomorrow morning. Let her know if frost comes back shell need to get a new refrigerator. Temps were perfect in both section so if theres a sealed system issue its right at the beginning. Cleaned condenser and vacuumed and removed all frost from freezer and dried thoroughly. ; ordrng 1 L14laborcode(jobcomplete) (L14 labor code (job complete))
We serviced a
KITCHEN AID REFRIGERATOR
Model KRSC703HBS00
Near Mauldin, South Carolina 29662
Nathan
Job Details:
08/05/2025
Needs filter head assembly which is $516.51 and possibly dual valve which would total $809.38. Going to try filter head assembly first then well try dual valve if that doesnt work. Only charging half today with filter head assembly $258.25 today and depending on if both filter head and dual valve would be what we would charge on return visit. Office will call and schedule return visit when parts arrive. ; ordrng 1 WPW10341320 (Dual valve) and 1 WPW10394053 (Filter head) and 1 L14laborcode (L14 labor code)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Waynesville, North Carolina 28786
Kari
Job Details:
08/05/2025
"Took quick pics, found unit running in a safety loop. Found control has 1-1 internal board error and 3-1 pressure sensor error. Cleared codes and as soon as I turned knob it started safety loop again. When that finished I checked pressure hose for kinks or blockages and it is open and clear. I put into diagnostic cycle and it ran that and finished, immediately when it was done got stuck back into safety loop And repeats the 1-1 and 3-1 codes. Installed new control unit checks ok"
We serviced a
KITCHENAID RANGE
Model KSGB900ESS6
Near Taylors, South Carolina 29687
Chris
Job Details:
08/05/2025
Installed new parts. Unit has customer home made trim piece on rear that I cant mount due to unit being after market and not a part of the machine. Advised customer he will behave to seek installation from custom piece for another company. Burner still doesnt light after parts install. Called tech line and spoke with Butch . Watched video 17 on burner adjustments . Adjusted burner. Blew through orifices. Unit now. lights and works as designed . File number for call is 7741857533
We serviced a
MAYTAG REFRIGERATOR
Model MFX2570AEM4
Near Salem, South Carolina 29676
Frank
Job Details:
08/05/2025
"Replaced switch and door seal,, heated molded to cabinet, looks like it's sealing good.. put adhesive on bottom of cabinet in case any air was getting in through the space in cabinet"
We serviced a
KITCHEN AID DISHWASHER
Model KDTE204KPS0
Near Seneca, South Carolina 29672
Frank
Job Details:
08/05/2025
"Found rust spots on bottom of door and around vent, called Chris Lynch and said rust not covered under ppp, informed customer and going to wait if they want it repaired ; ordrng 1 W11416371 (Panel) and 2 W10826179 (Screws)s and 2 W11157086 (Studs)s and 1 JobcodeQ16 (Job codeQ16 )"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKW3
Near Westminster, South Carolina 29693
Frank
Job Details:
08/05/2025
"Replaced dispenser tested diagnostic cycle, dispenser opening ok no need for control."
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Waynesville, North Carolina 28786
Kari
Job Details:
08/05/2025
Installed parts unit checks ok
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Chesnee, South Carolina 29323
Sam
Job Details:
08/05/2025
Found unit making scraping noise when in use. Inspected unit found drum scraping against side panel. Tried adjusting panel but unit still scraping drum appears to be warped causing excess movement and scraping against panel. Will order new drum for repair.; ordrng 1 W10545923 (Drum) and 1 J13 (J13)
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Gaffney, South Carolina 29340
Sam
Job Details:
08/05/2025
Cut agitator and spanner nut off of unit. Installed all parts ordered. Cycled unit through quick wash. All components activating. No leaking. Unit sounds normal when in spin. All functions pass.
We serviced a
AMANA WASHER
Model NTW4516FW3
Near Gaffney, South Carolina 29340
Sam
Job Details:
08/05/2025
Customer stated unit was not progressing cycles. Inspected unit. Cycled unit through diagnostics. No error codes. Cycled unit through delicate wash. Could not duplicate issue customer described. Ran unit through calibration cycle and diagnostic test cycle. Explained to customer that if she is still experiencing issues after calibrating to give us a call back. at time of diagnosis unit checks ok.
We serviced a
MAYTAG WASHER
Model MVW5435PW1
Near Converse, South Carolina 29329
Sam
Job Details:
08/05/2025
Found unit not draining. Checked wiring at drain pump found wires and connector separated and drain pump cover cracked. Unit will need new pump and harness. Units control also unresponsive flashing randomly. Will order control as well. ; ordrng 1 W11735316 (Control) and 1 W11643701 (Harness) and 1 W11399437 (Drain pump) and 1 L14 (L14)
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ3
Near Easley, South Carolina 29640
Matt
Job Details:
08/05/2025
"Replaced tub, checked o.kAuthorization. W1ER3E1NL2"
We serviced a
MAYTAG RANGE
Model MES8800PZ1
Near Swannanoa, North Carolina 28778
Kari
Job Details:
08/05/2025
Already filled out didnt need this sent to me ; saved tckt
We serviced a
WHIRLPOOL MW OVEN COMBO
Model WOEC5030LZ00
Near Simpsonville, South Carolina 29681
Carl
Job Details:
08/05/2025
Ran diagnostics found temp probe out of range. Could not install without wall dolly Job code: Ll14; ordrng 1 Walldolly (Tool)
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ
Near Mauldin, South Carolina 29662
Carl
Job Details:
08/05/2025
Installed new sump assembly cycled unit thru a diagnostics cycle unit ck ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Anderson, South Carolina 29621
Jerry D.
Job Details:
08/05/2025
"Control inoperable, installed cntrl sent preid, restored power, cycled unit through test and unit chks ok"
We serviced a
WHIRLPOOL DISHWASHER
Model KDFE104HBL0
Near Taylors, South Carolina 29687
Chris
Job Details:
08/05/2025
Installed new parts. Unit check is ok . No leaks
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Mauldin, South Carolina 29662
Carl
Job Details:
08/05/2025
Installed new acu ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Greenville, South Carolina 29607
Carl
Job Details:
08/05/2025
Installed new acu and fascia encoder bad ; ordrng 1 W11627521 (Encoder)
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706ESS01
Near Fairview, North Carolina 28730
Brian
Job Details:
08/05/2025
"Installed all parts ordered. Tested unit and found all operations ok at this time, with no leaks detected."
We serviced a
KITCHEN AID REFRIGERATOR
Model KRSF505ESS01
Near Taylors, South Carolina 29687
Chris
Job Details:
08/05/2025
Removed unit Cleaned condenser and compressor unit area front and back . Unit check is ok
We serviced a
WHIRLPOOL RANGE
Model WFE540H0ES0
Near Greer, South Carolina 29650
Chris
Job Details:
08/05/2025
Customer states unit doesnt heat. Voltage is good at terminal block. Both elements energize and check at 17ohms. Both elements pass visual inspection. No stored faults . Temp sensor is in range. Heated unit to 350 with meter and probe with customer present . Heated unit to 400 with customer present . Unit reached about set point . No fault of unit at this time . If problem continues gave customer a bluebook estimate for control at $890.98. All components check in range.
We serviced a
MAYTAG WASHER
Model MVW5430MW0
Near Easley, South Carolina 29640
Frank
Job Details:
07/29/2025
"Found capacitor inop, repaired wire harness to capacitor, tested cycle working as designed ; used 1 W11395618 (Capacitor) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS331SDHM08
Near Belton, South Carolina 29627
Jerry D.
Job Details:
07/29/2025
"Imk broken no water at dispenser, ordering, j13; ordrng 1 W11633658 (Imk) and 1 W11563296 (Valve)"
We serviced a
KITCHEN AID WALL OVEN
Model KEBC141KWH03
Near Taylors, South Carolina 29687
Chris
Job Details:
07/29/2025
Customer states unit has chemical smell when heating up. Customer states she uses baking soda paste to clean oven but hasnt done it in months . Prehated oven .unit has odd smell. Offered customer Price on two men to take unit out of wall and inspect. Advise customer we may or may not find anything causing odor . No parts are available for unit . Charging service call
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDB10
Near Greenville, South Carolina 29615
Chris
Job Details:
07/29/2025
Unit has clogged drain. Cleared drain. Unit check is ok
We serviced a
KITCHENAID DISHWASHER
Model KDTM604KPS0
Near Greenville, South Carolina 29615
Chris
Job Details:
07/29/2025
Ordeing heater for first call complete ; ordrng 1 W11537778 (Heater) and 1 N15
We serviced a
KITCHEN AID OVEN
Model KSIB900ESS1
Near Maggie Valley, North Carolina 28751
Kari
Job Details:
07/29/2025
Installed parts but the door scoop was a trim piece that doesnt match this oven. Will need to reorder and when I took cooktop off to replace control I noticed the seal was broken and the glass isnt attached to the frame on the right side and Im afraid if a pan is a little heavy on the that side the glass will fall through. ; ordrng 1 W10808299 (Cooktop) and 1 JOECHECKPARTANDMAKESUREDOORSCOOPISBLACKPLASTIC (Not metal trim) and 1 W11251351 (Door scoop) and 1 N15 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ00
Near Anderson, South Carolina 29621
Jerry D.
Job Details:
07/29/2025
"Installed listed prts cycled unit through defrost test and heater is pulling 4.8 amps, unit chks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Anderson, South Carolina 29625
Jerry D.
Job Details:
07/29/2025
"Damper noises, ordering, j13; ordrng 1 W11175955 (Damper)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ19
Near Columbus, North Carolina 28722
Brian
Job Details:
07/29/2025
"Water was turned off to unit when I arrived. Turned water on. Tested ice maker and water dispenser, while looking at all water lines and connections. Inspected filter and valve and ice maker and found no evidence of leaking at this time. Drain pan is ok. At this time, I cannot recreate issues. Left water on to unit and advised customer to keep a close eye on unit. Customer understands."
We serviced a
KITCHEN AID DISHWASHER
Model KDTE204KPS2
Near Columbus, North Carolina 28722
Brian
Job Details:
07/29/2025
"Found unit not mounted when I arrived. Checked and found water leaking from water inlet assembly. Inspected and found water inlet nut, inside tub, not screwed in properly. Corrected and tested unit multiple times. At this time, all operations ok with no leaks detected. Mounted unit. Collected 180."
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS05
Near Easley, South Carolina 29640
Frank
Job Details:
07/29/2025
"30 degrees in fc 47 in rc.. found in test 4 evaps not frosting up.. could be low on refrigeration..I accidentally broke the crisper drawer when closing the door ,need to replace..; ordrng 1 R600a (R600a) and 1 Jobcodex20 (Job code x20) and 1 Sealedsystemtech (Sealed system tech) and 1 Drier (Drier) and 1 Accessport (Access port) and 1 W11557671 (Compressor) and 1 W11546605 (Evaporator) and 1 W11595221 (Evaporator) and 1 W11590197 (3 way valve) and 1 WPW10531078 (Drawer)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Greenville, South Carolina 29605
Matt
Job Details:
07/29/2025
"Put unit in diagnostics and found error codes 8-2,9-1,10-1. Drain, diverter and dispenser codes. Ran auto test in diagnostics. Checked connections and all connections are tight. Unit filled with water and wash motor runs. Diverter operates dispenser opens.Drain motor did not run. Unit is full of soap and water. Logged drain circuit from control, plum and harness check good. Will order control.; ordrng 1 W11683480 (Control) and 1 Anytech (Any tech) and 1 F12jobcode (F12 job code)"