We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Union, SC 29379
Sam
Job Details:
03/26/2025
Installed ice maker. Cycled harvest and filled with water. Units ice maker performed all actions perfectly. All functions pass.
We serviced a
KITCHEN AID DISHWASHER
Model KDFE104DSS5
Near Columbus, NC 28722
Brian
Job Details:
03/26/2025
"Installed upper and lower spray arms. At this time, all operations ok with no leaks detected. Did not move unit."
We serviced a
KITCHENAID RANGE
Model KSEG950ESS2
Near Greenville, SC 29609
Carl
Job Details:
03/26/2025
Found cooktop cracked due to thermal installed new cook top unit ck ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Fountain Inn, SC 29644
Carl
Job Details:
03/26/2025
Installed new sump ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Simpsonville, SC 29680
Carl
Job Details:
03/26/2025
Found timer stalling and motor damaged motor bushings n15 ; ordrng 1 WPW10185982 (Timer) and 1 279827 (Motor) and 1 N15 (Labor)
We serviced a
MAYTAG WASHER
Model MVW5435PW0
Near Simpsonville, SC 29680
Carl
Job Details:
03/26/2025
Found belt lose installed new belt unit ck ok; used 1 W11239857 (Belt) from stock
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ3
Near Simpsonville, SC 29681
Carl
Job Details:
03/26/2025
Ran diagnostics found no error codes ran a test cycle to ck operation found as connection t the heater reinstalled the connector ck ok advised customer to use a jet dry and explained the cycles and the cycle add ons unit ck ok
We serviced a
WHIRLPOOL WASHER
Model WFW9050XW00
Near Duncan, SC 29334
Chris
Job Details:
03/26/2025
Unit needs console assembly. Part is discontinued. Called third party team and spoke with cassina.unit is unrepairable . File number for call is 7741204986
We serviced a
WHIRLPOOL M/W OTR
Model WMMF7330RZ00
Near Inman, SC 29349
Chris
Job Details:
03/26/2025
Unit has scratched door and cover. Ordeing for repair ; ordrng 1 W11662375 (Vent) and 1 W11731160 (Door) and 1 Anytech and 1 Anytech and 1 Anytech and 1 Anytech
We serviced a
WHIRLPOOL DISHWASHER
Model KDTM404KPS3
Near Seneca, SC 29678
Frank
Job Details:
03/26/2025
Replaced adjusters on middle rack ok. Ordered wrong to rack need to reorder; ordrng 1 W11551395 (Track mount) and 1 W11569162 (Track mount)
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Easley, SC 29640
Larry M.
Job Details:
03/26/2025
Replaced manifold assembly. Ensured no leaks. All functions pass.
We serviced a
WHIRLPOOL COOKTOP
Model KCGC506JSS
Near Easley, SC 29642
Larry M.
Job Details:
03/26/2025
Found spark module not engaging. Will need spark module and harness. 465.22Spark module and harness ; ordrng 1 W11319687 (Spark module) and 1 W11344433 (Harness) and 1 N14jobcode (N14 job code)
We serviced a
KITCHENAID TRASH COMPACTOR
Model KTTS505ESS2
Near Townville, SC 29689
Frank
Job Details:
03/26/2025
Found ran staying up not sitting off. Tested directional switch ok. Called tech line sr 7741219778. Replacing foot start switch.; ordrng 1 WPW10242556 (Switch) and 1 Jobcodej13 (Job code j13)
We serviced a
WHIRLPOOL RANGE
Model WEG750H0HZ6
Near Weaverville, NC 28787
Kari
Job Details:
03/26/2025
"Took quick pics, another company was out and diagnosed a bad ignitor. Need ignitor for repair. Found spark module good and power to unit is 120v need part for repair. ; ordrng 1 W11661929 (Ignitor LF) and 1 Q16 (Job code)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ11
Near Mars Hill, NC 28754
Kari
Job Details:
03/26/2025
Installed parts unit checks ok
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Mars Hill, NC 28754
Kari
Job Details:
03/26/2025
"Took quick pics, found unit full of after and drain pump showing 20 ohms. The harness is broken to the pump, installed new harness unit checks ok; used 1 W11643701 (Harness) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Lake Lure, NC 28746
Brian
Job Details:
03/26/2025
"Found f8e1 (Long fill). Inspected and found some debris in valve but found water entering unit ok. Installed Control (W11513246) and Valve (W11513255). Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Contacted safety team and documented sr number (7741161457); used 1 W11513255 (Valve TS) from stock"
We serviced a
MAYTAG WASHER
Model MVWP586GW0
Near Anderson, SC 29621
Frank
Job Details:
03/26/2025
Replaced control. Calibrated ran test cycle running as designed
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Anderson, SC 29624
Frank
Job Details:
03/26/2025
Found your case making squeaking noise replaced gear case tested cycle operating as intended
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HW09
Near Anderson, SC 29626
Frank
Job Details:
03/26/2025
Found diode defective replaced diode tested unit working heating operating as intended; used 1 W11256462 (Does) from stock
We serviced a
JENN-AIR MICROWAVE
Model JMW2430DP03
Near Simpsonville, SC 29681
Carl
Job Details:
03/26/2025
Installed new ui cycled unit to ck operation unit ck ok
We serviced a
WHIRLPOOL DRYER
Model LER7646DQ1
Near Fairview, NC 28730
Brian
Job Details:
03/26/2025
Installed new door catch and lent screen. Tested unit and found unit operations ok at this time but airflow restricted. Recommended customer have vent lines cleaned. Customer understands.
We serviced a
WHIRLPOOL DRYER
Model WED500CMW0
Near Piedmont, SC 29673
Jerry D.
Job Details:
03/26/2025
"Installed listed parts cycled unit through test and unit still vibrating terrible, t line andrew run motor with blower off if it still vibration replace motor, also installed seal tape around vent and motor plate tightened all bulkhead screws and motor plate, completed all per t line, unit still vibrating bad, Per tline. order motor and blower again, 7741224083, Customer upset, Send supervisor, q16; ordrng 1 Q16 (Q16) and 1 Supervisor (Supervisor)"
We serviced a
MAYTAG WASHER
Model MVW5430MW2
Near Marshall, NC 28753
Kari
Job Details:
03/26/2025
"Took quick pics, found unit full of after and drain pump showing 20 ohms. The harness is broken to the pump, installed new harness unit checks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Reidville, SC 29375
Sam
Job Details:
03/26/2025
Upon arrival realized units handle that was ordered is incorrect color will re order correct color handle. Installed new user interface and screws. Calibrated measure water with measuring cup. Cycled measured fill. Measure fill is accurate now and functioning properly. Will re order handle.; ordrng 1 W11542651 (Handle stainless) and 1 C1 (C1)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM13
Near Roebuck, SC 29376
Sam
Job Details:
03/26/2025
Found unit not level when trying to level machine with cabinets. When leveling unit begins to rock back and forth. Will need shims for repair. Will order shims.; ordrng 4 4387828A (Shim)s and 1 J13 (J13)
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAKZ3
Near Travelers Rest, SC 29690
Matt
Job Details:
03/26/2025
"Found float stuck in the up position. Realigned float. Started a cycle and watched unit fill, wash, drain with no issues."
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Travelers Rest, SC 29690
Matt
Job Details:
03/26/2025
Found open contact in timer from bk to red jumped contact and heater hearts. Will order new timer.; ordrng 1 W11685947 (Timer) and 1 F12jobcode (F12 job code) and 1 Anytech (Any tech)
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Greenville, SC 29605
Nathan
Job Details:
03/26/2025
"Has F8E1 error long fill error. Filling normally so Im ordering control thats not recognizing water fill change while filling intermittently. Gear case is screeching in spin cycle and door lock wouldnt disengage when service diagnostics stopped. Ordering gear case,slider,valve,and door lock. Office will call and schedule return visit when parts arrive. ; ordrng 1 W11621180 (Control ACU) and 1 W11449841 (Gear case) and 1 W11700916 (Door latch) and 1 W10734521 (Slider) and 1 W11595805 (Valve) and 1 Q16laborcode (Q16 labor code)"
We serviced a
WHIRLPOOL DISHWASHER
Model DU1015XTXS2
Near Greenville, SC 29615
Nathan
Job Details:
03/26/2025
Removed knock-out plug from newly installed disposal. Tested operation and everythings performing as designed.
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Hendersonville, NC 28792
Brian
Job Details:
03/26/2025
Found f8e1 (long fill). Tested unit in diagnostic and found cold water not entering unit. Inspected and found debris in valve. Also found belt squealing. Valve (W11513255) cam (W10721967) and belt (W11239857) needed. ; ordrng 1 W11513255 (Valve) and 1 W10721967 (Cam) and 1 W11239857 (Belt) and 1 L14 (Job code)
We serviced a
MAYTAG WASHER
Model MVWC300VW1
Near Asheville, NC 28801
Brian
Job Details:
03/26/2025
"Installed agitator and agitator screw. Tested and found all operations ok at this time, with no leaks detected. Did not move unit."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ03
Near Asheville, NC 28803
Brian
Job Details:
03/26/2025
Found food in fresh food section freezing. Thermistors check ok in diagnostic. Harness (W10884720) Acu (W11043763) evap fan (W11334745) needed. ; ordrng 1 W11043763 (Acu) and 1 W11334745 (Evap fan) and 1 U18 (Job code) and 1 W10884720 (Harness)
We serviced a
WHIRLPOOL WASHER
Model WTW5100HC3
Near Easley, SC 29640
Larry M.
Job Details:
03/26/2025
Could get inner basket to separate due to rust. Will need outer basket and wash plate. ; ordrng 1 W11219115 (Outer basket) and 1 W10752283 (Wash plate)
We serviced a
JENN-AIR REFRIGERATOR
Model JBSFS48NMX00
Near Simpsonville, SC 29681
Carl
Job Details:
03/26/2025
Found valve receiving voltage q16; ordrng 2 W11225845 (Valve)s and 1 WPW10121140 (Filter housing) and 1 Q16 (Labor)
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ2
Near Piedmont, SC 29673
Jerry D.
Job Details:
03/26/2025
"Installed listed parts cycled unit through test and unit now giving FAE4. Code, that code is not on tech sheet, t line. 7741223880, Any code starting with A is actually 10, F10E4 code is for motor, replace motor , ordering, j13; ordrng 1 W11299377 (Motor sump assy)"
We serviced a
MAYTAG WASHER
Model MVWX655DW2
Near Spartanburg, SC 29301
Sam
Job Details:
03/26/2025
Found unit not dispensing fabric softener. Unit also appears to be making slight squeaking noise when agitating. Unit has no error codes in diagnostics. Will order new valve housing and belt for repair. ; ordrng 1 W11127357 (Valve housing) and 1 L14 (L14) and 1 W11239857 (Belt)
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Lyman, SC 29365
Chris
Job Details:
03/26/2025
Unit has failed pressure sensor. Ordeing for repair ; ordrng 1 W11607637 (Control)
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Pendleton, SC 29670
Frank
Job Details:
03/26/2025
Roller seized in unit making squeaky sound. Put in dryer repair kit tested working as intended
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT549SZDM06
Near Spartanburg, SC 29301
Sam
Job Details:
03/26/2025
Unit not making ice. Found unit not filling with water. Cycled ice maker. Ice maker rotated. Did not hear humming from valve when energized to fill with water. Replaced valve from ice maker kit pre ID. Cycled ice maker again. Ice maker rotating and now filling with water. No leaks found during test. All components working. All functions pass.
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Travelers Rest, SC 29690
Matt
Job Details:
03/26/2025
Customer said unit does not heat. Found no power on the red wire from the motor. Checked motor and found the main harness not snapped into place on the lower side of the motor. Snapped harness into place and pulled on it to make sure it could not come loose. Harness is secure. Tested operation. Dryer now heats properly.
We serviced a
KITCHEN AID REFRIGERATOR
Model n/a
Near Travelers Rest, SC 29690
Matt
Job Details:
03/26/2025
Found some LED modules have failed and lights are flickering. This unit is over 5 years old and doesn't qualify for service pointer w11460554. Rev n. Blue book estimate to install new LED module kit is 554.00. I have customer the customer care number to see if they could get a concession for this repair. 1-800-253-1301If customer calls back and wants parts ordered part number is W11683244. If customer calls back in less than 30 days balance would be 404.00
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW1
Near Easley, SC 29642
Larry M.
Job Details:
03/26/2025
"Found gearcase loose. Found grease leaking. Quoted customer $725.60 to replace gearcase, belt and splutch kit. Customer declined"
We serviced a
KITCHENAID KITCHEN
Model KDTM404KPS3
Near Piedmont, SC 29673
Larry M.
Job Details:
03/26/2025
Found motor not working when put into diagnostics. Will need motor. ; ordrng 1 W11416362 (Pump assembly) and 1 N14jobcode (N14 job code)
We serviced a
KITCHEN AID MICROWAVE
Model KOCE500ESS22
Near Piedmont, SC 29673
Larry M.
Job Details:
03/26/2025
Could not get unit to come out of wall. Informed customer that unit will need to be removed before we can fix unit. ;
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEHB
Near Easley, SC 29640
Larry M.
Job Details:
03/26/2025
Found bottom freezer at appropriate temperature 0. Found refrigerator not cooling. Found damper stuck closed. Will need damper. ; ordrng 1 W11087463 (Damper) and 1 J13jobcode (J13 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Pendleton, SC 29670
Frank
Job Details:
03/26/2025
Replaced listed parts tested cycle working as designed
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Lyman, SC 29365
Chris
Job Details:
03/26/2025
Installed new part. Unit Check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW01
Near Taylors, SC 29687
Nathan
Job Details:
03/26/2025
"Replaced evaporator,compressor,and filter drier. Evaporator was leaking. Pressurized at 250 psi for 15 minutes then vacuumed for 30 minutes until vacuum reached 500 microns. Added 4.24 ounces of R134a refrigerant to system. Everythings performing as designed. Let homeowner know itll take 24 hours to get back to correct temperatures. Has 5 year parts and labor on the sealed system so owner doesnt owe anything towards repair."
We serviced a
JENN-AIR RANGE
Model JDS1750FP0
Near Greenville, SC 29615
Chris
Job Details:
03/26/2025
Installed new part. Unit check is ok
We serviced a
WHIRLPOOL M/W OTR
Model WMMF7330RZ00
Near Inman, SC 29349
Chris
Job Details:
03/26/2025
Unit has scratched door and cover. Ordeing for repair ; ordrng 1 W11662375 (Vent) and 1 W11731160 (Door) and 1 Anytech and 1 Anytech and 1 Anytech and 1 Anytech
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF507HBS00
Near Boiling Springs, SC 29316
Sam
Job Details:
03/26/2025
Unit has 1 light out in freezer section and 1 light out in refrigerator section. Will order light service kit. Cannot tell if light out in freezer is because of light itself or switch. Will order switch just in case for repair. ; ordrng 1 W11683244 (Led kit) and 1 W11396033 (Switch) and 1 L14 (L14)
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Inman, SC 29349
Sam
Job Details:
03/25/2025
Found unit making grinding noise at end of cycle. Unit has no error codes. Checked underneath unit found screw to rotor/stator loose. Applied red locktite to screw and tightened down. Unit no longer making grinding noise in spin. All functions pass. Informed customer there was a small amount of oil in stator from gearcase and may not be a big deal now but as a heads up may need new gearcase in the future. Customer acknowledges. Collected trip charge of 150.00.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT720PADM3
Near Simpsonville, SC 29680
Matt
Job Details:
03/25/2025
Put unit in diagnostics and found it had error codes F4e3(wash motor not running)f7e1(not heating). Ran auto test and wash motor did not run. Connection to motor is good. Motor grounded and damaged control. Unit will need new wash motor and control. Will order.; ordrng 1 W11306302 (Control) and 1 W11309335 (Pump/motor) and 1 L14jobcode (L14 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Simpsonville, SC 29681
Carl
Job Details:
03/25/2025
Fran diagnostics found f8e1 ck pressure hose not blocked valves seem weak. J13 ; ordrng 1 W11603810 (Acu) and 1 W11101906 (Valve)
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Greenville, SC 29617
Larry M.
Job Details:
03/25/2025
Found main control not responding. Will need main control. ; ordrng 1 W11626074 (Control) and 1 J13jobcode (J13 job code)
We serviced a
WHIRLPOOL FREEZER
Model WZF34X18DW07
Near Liberty, SC 29657
Nathan
Job Details:
03/25/2025
Running pressures -18 low side 30-35 p.s.i high side. 9 degrees in freezer. Has to above 40 degrees. Pressures holding steady indicating no non condensables in the system. File number 7741208914 Brandon from techline in the ambient conditions of the freezer being in the porch that it wont cool correctly. Needs to be indoors where the ancient temperature is above 40 degrees. When arriving temperature is 37 degrees. Pressures according to tech line are in normal range considering temperatures. Operating outside of design temperatures. Let homeowner know that after they bring it in the house and if theyre still having issues to call us back.
We serviced a
WHIRLPOOL RANGE
Model WFE535S0LZ3
Near Greenville, SC 29609
Nathan
Job Details:
03/25/2025
Homeowner stated when cooking bread that oven was set at 350 and dropped to 315. Put in thermal probe to check temperatures. 1.66@334 degrees fareinheit. Used resistance box to see if control boards was reading temperature probe correctly and it was. Set resistance box to 1750 k ohms and started preheat and control correctly said it was at 400 degrees. When initially preheating oven at 350 temperature didnt even get close to set point or past like it shouldve. Replaced temperature sensor and everythings performing as designed.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Greenville, SC 29605
Nathan
Job Details:
03/25/2025
Replaced detergent dispenser that was getting water inside. Let them know that itll take awhile to use all the rinse aid at level one and that its better to use gel detergent filled up to the first line. Tested amperage to heater and its working and showed them how to get the best drying results. Everythings performing as designed.
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Greenville, SC 29605
Nathan
Job Details:
03/25/2025
Replaced dented warming drawer front. Everythings as designed now.
We serviced a
FRIGIDAIRE STACKED LAUNDRY
Model FFLE3900UW3
Near Greenville, SC 29601
Nathan
Job Details:
03/25/2025
Put belt back on pulley. Homeowner stated he manually turned drum and thats when belt came off of pulley. Everythings performing as designed.
We serviced a
WHIRLPOOL OVEN
Model WFG550S0LZ5
Near Fountain Inn, SC 29644
Jerry D.
Job Details:
03/25/2025
"Igniter inoperable, installed igniter sent preid, cycled unit through test and all functions are working properly"
We serviced a
JENN-AIR DISHWASHER
Model JDPSS244LL2
Near Simpsonville, SC 29681
Jerry D.
Job Details:
03/25/2025
"Customer very upset doesnt want unit repairs, wants unit replaced, TLine, replace vent. ordering, , j13; ordrng 1 W11038734 (Duct) and 1 W11038720 (Vent assembly) and 1 W11025634 (Bezel) and 1 W11184028 (Gaskets)"
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF577KPS02
Near Chesnee, SC 29323
Sam
Job Details:
03/25/2025
Found units freezer gasket split across top of freezer door. Replaced gasket from pre ID. Opened and closed door multiple times. No gaps or air leaks throughout gasket. Unit checks ok.
We serviced a
MAYTAG DRYER
Model MEDX655DW1
Near Gaffney, SC 29341
Sam
Job Details:
03/25/2025
Found unit will not start light coming on inside unit. Units door switch working. Checked voltage. Good 240 volts incoming. Checked thermal fuse. Found thermal blown. No obvious kinks or clogs in venting or dryer. Replaced thermal fuse from stock. Cycled unit for timed dry for 10 minutes. Unit coming on tumbling and heating. All components working. All functions pass.; used 1 WP3392519 (Thermal fuse) from stock
We serviced a
MAYTAG WASHER
Model MVW7230HC1
Near Waynesville, NC 28786
Kari
Job Details:
03/25/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPB2
Near Waynesville, NC 28786
Kari
Job Details:
03/25/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM13
Near Boiling Springs, SC 29316
Sam
Job Details:
03/25/2025
Found unit making loud rumbling noise in freezer section. Units fan not operating correctly in freezer section and making rumbling noise. Replaced fan motor from pre ID. Cycled units power. Units fan no longer making loud rumbling noise at time of repair. All components working. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Spartanburg, SC 29301
Sam
Job Details:
03/25/2025
Installed parts. Cycled unit through calibration and diagnostics cycle. All components activating. Both cycles performed perfect. All functions pass.
We serviced a
WHIRLPOOL LAUNDRY CENTER
Model wtw4816fw3
Near Easley, SC 29640
Matt
Job Details:
03/25/2025
Found unit leaking from outer tub near drain pump. Will order.; ordrng 1 W10371566 (Outer tub) and 1 X20jobcode (D20 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Waynesville, NC 28786
Kari
Job Details:
03/25/2025
Installed parts. Unit checks ok
We serviced a
WHIRLPOOL WALL OVEN
Model WOD51EC0HS02
Near Clyde, NC 28721
Kari
Job Details:
03/25/2025
"Installed parts, ran both ovens on 350. Both completed bake cycle with no codes. Unit checks ok"
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Candler, NC 28715
Kari
Job Details:
03/25/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Moore, SC 29369
Sam
Job Details:
03/25/2025
Installed all parts. Cycled unit through diagnostics quick cycle and quick wash. All components working. Unit progressed through quick wash perfectly. All functions pass.
We serviced a
WHIRLPOOL KITCHEN
Model WDPA70SAMZ3
Near Easley, SC 29640
Matt
Job Details:
03/25/2025
"Found tub leaking at right rear seam. Replaced tub, checks ok Authorization w1dpio0nl2"
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Greenville, SC 29611
Larry M.
Job Details:
03/25/2025
"Installed timer, motor, and blower wheel. Started unit. Unit would run as long start button was held. Once button in depressed the unit stops working. Found harness burnt due to outlet from house. Called TECHLINE and spoke to Brandon Suggested a start switch SR:7741209107; ordrng 1 W11625516 (Switch)"
We serviced a
MAYTAG WASHER
Model MVWB765FW0
Near Simpsonville, SC 29681
Carl
Job Details:
03/25/2025
Installed new acu ran diagnostics and a test cycled to ck operation unit ck ok
We serviced a
AMANA RANGE
Model AER6303MFW1
Near Piedmont, SC 29673
Jerry D.
Job Details:
03/25/2025
"Door fell apart screws fell out, reassembled door installed new screws, unit checks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Hendersonville, NC 28739
Brian
Job Details:
03/25/2025
"Installed new inlet valve. Calibrated and tested unit. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Mills River, NC 28759
Brian
Job Details:
03/25/2025
"Found f4e3 (motor not running). Tested and found water not entering unit. Inspected and found water turned off. Turned water on and tested, observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit."
We serviced a
JENN-AIR OVEN
Model JJW3830DS02
Near Asheville, NC 28804
Brian
Job Details:
03/25/2025
Found F2e1 (stuck key) on display when I arrived. Attempted to enter diagnostic and could not. New Control panel (W11232121) needed. Quoted customer 1882.53 to complete repairs. Customer wished to proceed. Collected total. ; ordrng 1 W11232121 (Console) and 1 L14 (Job code)
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Pelzer, SC 29669
Jerry D.
Job Details:
03/25/2025
"Tub leaning bad found right front suspension parts broken and missing , installed kit. W11187091 from truck stock, cycled unit through test and all functions are working properly"
We serviced a
WHIRLPOOL DRYER
Model WED6150PW0
Near Piedmont, SC 29673
Jerry D.
Job Details:
03/25/2025
"Senser pad broken, ordering, j13; ordrng 1 W11424720 (Pad)"
We serviced a
FRIGIDAIRE DRYER
Model GLEQ2152ES0
Near Greenville, SC 29611
Larry M.
Job Details:
03/25/2025
Replaced dryer repair kit. Ran test cycle. All functions pass.
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Simpsonville, SC 29680
Carl
Job Details:
03/25/2025
Installed new knobes unit ck ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Fountain Inn, SC 29644
Carl
Job Details:
03/25/2025
Is new door cycled dispenser several times to ck operation unit ck ok
We serviced a
JENN AIR REFRIGERATOR
Model JF42NXFXDE02
Near Asheville, NC 28804
Brian
Job Details:
03/25/2025
Found interior leds out and drip from ceiling evaporator. Inspected and found evaporator drain clogged. Cleared clog and found drain working ok at this time. Quoted customer 562.83 to install 4 led kits (W11632139). Customer did not wish to proceed with repairs at this time. Collected 100 for todays work.
We serviced a
MAYTAG FREEZER
Model MQF1656TEW02
Near Gray Court, SC 29645
Carl
Job Details:
03/25/2025
Found evapnfan open j13 will collet balance on return bal. 237.97; ordrng 1 WPW10236142 (Evaporator fan)
We serviced a
JENN-AIR DISHWASHER
Model JDPSS246LL1
Near Easley, SC 29640
Matt
Job Details:
03/25/2025
"Replaced outer tub, checks ok. Authorization j1dpo41apl2"
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Lyman, SC 29365
Chris
Job Details:
03/25/2025
"Customer states stainless steel control panel gets hot . Unit is a stainless steel gas range. Customer has unit uninstalled upon arrival . Unit has f2 fault stored and showed Customer. Replaced control. Ran unit check. Unit hit target temp and cycled off as designed. No abnormal temperature or runaway temp . Unit vents below control panel. Showed customer vent, this is normal operation. Unit check is ok"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Lyman, SC 29365
Chris
Job Details:
03/25/2025
Cusotmer states unit doesnt heat. Unit has no stored faults. Unit passes auto test mode. Heater pulls 7.3 amps . Took picture of heater amps . Unit works as designed. Customer not using rinse aid. Refilled rinse aid. Called tech line and spoke With Austin . Unit works as designed. File number for call is 7741212170
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Asheville, NC 28801
Brian
Job Details:
03/25/2025
"Tested unit and found it heating ok. Checked and found vent line kinked and debris around vent, on side of house. Recommend customer replace vent outside with one that goes straight out, instead of blowing into the ground. Corrected vent line kink. Tested unit and found all operations ok at this time."
We serviced a
MAYTAG RANGE
Model MGR7700LZ1
Near Asheville, NC 28801
Brian
Job Details:
03/25/2025
"Unit pulled out when I arrived. Installed new valve and tubing. Tested all burners observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit. Left pulled out."
We serviced a
WHIRLPOOL REFRIGERATOR
Model MSS25C4MGZ09
Near Easley, SC 29642
Larry M.
Job Details:
03/25/2025
Called TECHLINE Steve recommended SR:7741213519Thermistor out of range ; ordrng 2 WPW10384183 (Thermistor)s and 1 W11566891 (Control)
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Pelzer, SC 29669
Carl
Job Details:
03/25/2025
Installed new harness ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WSF26C2EXF01
Near Greer, SC 29650
Carl
Job Details:
03/25/2025
Found door harness fatigued and open advised customer
We serviced a
WHIRLPOOL DISHWASHER
Model WDF332PAMS0
Near Simpsonville, SC 29680
Jerry D.
Job Details:
03/25/2025
"Unit was dropped, support bent, tub cracked, , customer upset wants unit replaced, w19; ordrng 1 W19 (W19) and 1 W11525187 (Sump and motor) and 1 W11467711 (Tub) and 1 W11623675 (Support)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Piedmont, SC 29673
Larry M.
Job Details:
03/25/2025
Part came in damaged. Will need to reorder. ; ordrng 1 W11613479 (Sump assembly)
We serviced a
KITCHENAID DISHWASHER
Model KDTM604KPS3
Near Greer, SC 29650
Chris
Job Details:
03/25/2025
Found plug not knocked out of disposal. Removed plug. Unit check is ok. No leaks
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFC704FPS00
Near Greer, SC 29650
Chris
Job Details:
03/25/2025
"Unit has sealed system failure. Fresh food is at 46 and freezer is completely warm, . No frost pattern on evap . Unit doesnt make ice . Unit needs sealed system repair . Gave customer labor estimate of $1648.49. Customer denied repair"