We serviced a
JENN-AIR REFRIGERATOR
Model JBZFL24IGX00
Near Salem, SC 29676
Matt
Job Details: 01/30/2025
Helped J.R.
We serviced a
KITCHEN AID ICE MACHINE
Model KUIX305ESS2
Near Seneca, SC 29672
Frank
Job Details: 01/30/2025
"Replaced thermistor, went through diagnostics setting all good. Paid $197.55 CK 4860"
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Easley, SC 29642
Matt
Job Details: 01/30/2025
Found cycling thermostat had open contact at all times. Replaced cycling thermostat and checked operation. All functions pass.; used 1 WP3387134 (Thermostat) from stock
We serviced a
WHIRLPOOL WASHER
Model WTW6157PW0
Near Taylors, SC 29687
Matt
Job Details: 01/30/2025
Helped RC on this.
We serviced a
KITCHEN AID REFRIGERATOR
Model KFIS27CXWH3
Near Greenville, SC 29607
Carl
Job Details: 01/30/2025
Installed new fan found no voltage to the imk or the fan and will need supervisor to go back with; ordrng 1 WPW10267646 (Gemni board) and 1 Supervisor (Help)
We serviced a
JENN-AIR REFRIGERATOR
Model JBZFL24IGX00
Near Salem, SC 29676
Jerry
Job Details: 01/30/2025
Founf fill tube frozen heater on fill tube open replaced fille tube imk now filling normal
We serviced a
AMANA DISHWASHER
Model ADB1400AMB1
Near Asheville, NC 28803
Brian
Job Details: 01/30/2025
"Installed new vent gasket and bezel. Tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit."
We serviced a
MAYTAG LAUNDRY CENTER
Model MVWX655DW1
Near Greer, SC 29651
Chris
Job Details: 01/30/2025
"Unit has shorted capacitor. Shifter and cams are broken, Replaced from stock . Unit check is ok ; used 1 W10721967 (Cam), 1 W11395018 (Capictor), and 1 W10913953 (Shifter) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Greer, SC 29651
Chris
Job Details: 01/30/2025
Customer states unit never ran a cycle after last visit. Re applied water and drain to unit.unit has no stored faults. Ran diagnostics. Unit passes with no faults . Ran normal cycle. Unit began working . Stopped and added load . Unit works as designed. New authorization is w1dat51nl2
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM13
Near Greer, SC 29651
Chris
Job Details: 01/30/2025
Found stalling imk. Replaced from stock . Unit check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ16
Near Mills River, NC 28759
Brian
Job Details: 01/30/2025
Found ice maker not cycling and stuck halfway through the cycle. Ice maker getting proper voltage. New Ice maker (W11548540) needed. Quoted customer 569.71 to complete repairs. Customer did not wish to proceed with repairs at this time. Collected 150 for service call.
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF577KPS02
Near Hendersonville, NC 28739
Brian
Job Details: 01/30/2025
Found food in freezer freezing but fresh food is not cooling well. Found good frost pattern on evaporator. Damper is operating normally. Tested and found evaporator fan getting voltage but not running. New Evap fan (W11578030) and blade (WP67006337) needed. ; ordrng 1 W11578030 (Evap fan) and 1 L14 (Job code) and 1 WP67006337 (Fan blade)
We serviced a
MAYTAG DRYER
Model MED6230HW3
Near Greer, SC 29651
Sam
Job Details: 01/30/2025
"Installed new shafts, nuts and washers with new rollers motor and blower wheel. All components secured and functioning. Cycled unit after installing all parts. No abnormal sounds heard. All functions pass."
We serviced a
KITCHEN AID REFRIGERATOR
Model KRSF505ESS01
Near Hendersonville, NC 28739
Brian
Job Details: 01/30/2025
Found tubing and rollers squeaking. Also found lower fresh food led out. Module kit (W11683241) grease (WP542638) silicone (W10841140) needed. ; ordrng 1 W11683241 (Module kit) and 1 WP542638 (Greese) and 1 W10841140 (Silicone) and 1 L14 (Job code)
We serviced a
MAYTAG LAUNDRY CENTER
Model MVW7230HW1
Near Royal Pines, NC 28704
Brian
Job Details: 01/30/2025
Found f7e4 (basket reengagement failure) error code. Tested unit in diagnostics and found unit will not spin. Inspected unit and found slider ring damaged. New Slider (W10734521) needed. ; ordrng 2 W10734521 (Slider)s and 1 L14 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDB09
Near Asheville, NC 28704
Brian
Job Details: 01/30/2025
Found compressor and all fans working. Found frost ball on top right of evaporator and no frost pattern any where else. Sealed system repairs needed. R600a. Compressor (W11582579) coupling (W11504415)coupling (W11504431) coupling (W11506619) coupling (W11506635) evaporator (W11562258) coupling (W11504419) coupling (W11504449) dye drier (wpw10143759); ordrng 1 W11582579 (Compressor) and 1 W11504415 (Coupling) and 1 W11504431 (Coupling) and 1 W11506619 (Coupling) and 1 W11506635 (Coupling) and 1 W11562258 (Evaporator) and 1 W11504419 (Coupling) and 1 W11504449 (Coupling) and 1 R600a (R600a) and 1 Sealedsystemtech (Sealed system tech) and 1 X20 (Job code) and 1 wpw10143759 (Dye drier)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Spartanburg, SC 29301
Sam
Job Details: 01/30/2025
Installed damper. Cycled damper in diagnostics. Units damper opening and closing. All sounds normal from damper. Unit checks ok.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT104TFDW03
Near Spartanburg, SC 29307
Sam
Job Details: 01/30/2025
Customer stated unit cools on and off. Sometimes it will be cooling both sections and sometimes now. Checked temperatures inside units RC and FC. RC temp is 37 FC temp is 3 Checked compressor running. Getting 120 volts at outlet. At time of repair unit is operational but based on customer information best guess is that starter device is not coming on or control is not telling compressor to activate every time. Will order control and starter device.; ordrng 1 W11547180 (Starter device) and 1 W11577965 (Control) and 1 L14 (L14)
We serviced a
WHIRLPOOL RANGE
Model WFE320M0JS4
Near Boiling Springs, SC 29316
Sam
Job Details: 01/30/2025
Found unit has f2e1 error code for shorted ui. Replaced control from pre ID. Cycled bake and burners after installation. All burners and bake working correctly. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ10
Near Liberty, SC 29657
Frank
Job Details: 01/30/2025
Water dripping out of water spigot.. ordering all lines to be replaced; ordrng 1 Jobcodel14 (Job code l14) and 1 W11227371 (Spigot body) and 1 W11677733 (Door waterline) and 1 W11706229 (Resivour) and 1 W11548535 (Water valve)
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Chesnee, SC 29323
Sam
Job Details: 01/30/2025
Found unit not draining. Found wire underneath near back panel split. Unit will need new harness for repair. Will order harness. Customer also stated unit makes awful squealing noise in spin. Could not get unit to cycle spin because unit will not drain. Will order gearcase and Splutch just in case.; ordrng 1 W11643701 (Harness) and 1 N15 (N15) and 1 W11449840 (Gearcase) and 1 W10721967 (Splutch)
We serviced a
MAYTAG LAUNDRY CENTER
Model MVW6230HW3
Near Gaffney, SC 29341
Sam
Job Details: 01/30/2025
Found unit making knocking noise at back panel. Called techline techline advised to remove screws from back panel and re adjust and if noise persists to replace back panel. Adjusted back panel and re installed screws. Cycled through spin. Unit no longer making tapping sound like before. All functions pass. SR#7740850492
We serviced a
MAYTAG LAUNDRY CENTER
Model MVW5035MW2
Near Candler, NC 28715
Kari
Job Details: 01/30/2025
"Took quick pics, found unit just pours water into tub ven if unit is unplugged found unit had 8-3 hazardous water code stored. Cleared codes. Installed new valve assembly. Ran diagnostic test. Unit checks ok"
We serviced a
MAYTAG KITCHEN
Model MDB4949SKZ3
Near Candler, NC 28715
Kari
Job Details: 01/30/2025
"Took quick pics, found units strike broken. Need strike for repair. ; ordrng 1 W11545309 (Strike) and 1 J13 (Job code)"
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFC704FPS04
Near Gaffney, SC 29340
Sam
Job Details: 01/30/2025
"Fund units refrigerator evaporator covered in ice. Called techline. Went over checks with techline. Based on temperature readings and fan not coming on unit most likely needs evaporator cover for refrigerator section that comes with new fan and thermistors on it. Techline also stated it is possible that control board might be needed as well if cover doesnt fix issue of unit refrigerator section freezing up. Gave customer estimate of 1457.60 for evaporator cover, heater, and control board combo. Customer stated she would like to think repair over before going through with repair. Collected trip charge of 150.00. If customer decides to continue with repair remaining estimates would be 1307.60 for all parts. If customer would like to only try the evaporator cover and heater and not control boards it would cost 844.20. Part numbers for repair if customer decides to continue with it is 1 evap cover W11395558, 1 control board W11533213, and 1 heater W11291124SR#7740848701"
We serviced a
KITCHEN AID RANGE
Model KECD807XSS01
Near Simpsonville, SC 29681
Carl
Job Details: 01/30/2025
Installed new switch cycled unit ck ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Easley, SC 29640
Carl
Job Details: 01/30/2025
Damage to Outter and inner tub unit was dropped unrepairable
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Easley, SC 29642
Carl
Job Details: 01/30/2025
Sr# 7740849905 installed new acu and latch ran diagnostics and a test cycle performed to factory specs customer called and said unit still didnt cycled went back called tech line ran a calibration cycle and then cycled unit still straight to done advised to replace lower harness and motor ; ordrng 1 W11643701 (Lower harness) and 1 W11026785 (Motor) and 1 W11395618 (Cap)
We serviced a
KITCHEN AID RANGE
Model KFGG500EBS2
Near Easley, SC 29642
Carl
Job Details: 01/30/2025
Installed new control and up ran diagnostics and cycled unit to ck operation unit ck ok
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Pelzer, SC 29669
Jerry D.
Job Details: 01/30/2025
"Installed listed parts cycled unit through test and unit checks okay , also leveled unit and cleaned out tub, all functions are working properly"
We serviced a
AMANA REFRIGERATOR
Model ART318FFDB11
Near Anderson, SC 29624
Jerry D.
Job Details: 01/30/2025
"Installed new dryer filter, pulled 30 inches of vaccum, vaccum is holding, charged 600, 1.76 oz compressor running, Found system restricted, goes into 20 inches of vaccum, tryed clearing with nitrogen 180psi, found aluminum cap tub kinked and clogged at cabinet above compressor, tryed to pull some cap tub outof cabinet to unkink it and it is broken at kink, t line. Andrew, 7740850182"
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Easley, SC 29642
Larry M.
Job Details: 01/30/2025
Found inner basket out of balance ; ordrng 1 W11178227 (Basket) and 1 J13jobcode (J13 job code)
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Easley, SC 29642
Larry M.
Job Details: 01/30/2025
Found UI glitching. Will need UI and ACU; ordrng 1 W11325569 (UI) and 1 N15jobcode (N15 job code)
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAMS0
Near Greenville, SC 29605
Nathan
Job Details: 01/30/2025
Needs control board because its getting power but not turning on. Office will call and schedule return visit when part arrives. ; ordrng 1 W11613566 (Control board) and 1 J13laborcode (J13 labor code) and 1 GiveparttoNathantosneakin (Give part to Nathan to sneak in)
We serviced a
WHIRLPOOL LAUNDRY CENTER
Model WFC682CLW0
Near Greenville, SC 29611
Larry M.
Job Details: 01/30/2025
George from TECHLINE Replace harness and ACUSR:7740850992Installed ACU and lock. Ran test cycle. Checks ok.
We serviced a
JENN-AIR RANGE
Model JGRP436HL05
Near Greer, SC 29651
Chris
Job Details: 01/30/2025
Customer states unit has strong gas odor when oven is in use . Customer states this has been this way since install . Customer also states unit makes woof when unit lights. Unit is propane. Woof noise is normal. Used sniffer . No leaks defected. Customer present . All components works as designed. Unit has weak ignitor on right rear . Ordeing for repair ; ordrng 1 W11238756 (Ignitor) and 1 S17
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Greenville, SC 29605
Larry M.
Job Details: 01/30/2025
Called techline DillionSR:7740849737Advised to replace flap. ; ordrng 1 W11678839 (Ice door)
We serviced a
WHIRLPOOL M/W OTR
Model WMH78519LZ00
Near Greenville, SC 29617
Larry M.
Job Details: 01/30/2025
Replaced fan and capacitor. All functions pass
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Greenville, SC 29605
Nathan
Job Details: 01/30/2025
"Has refrigerant issue most likely restriction. Homeowner says that itll freeze then thaw out. Using freezer atm because refrigerator section isnt coming down to temperature. Ordering compressor,drier,and evaporators. Need at least 4 hours because unit is in a tight opening. ; ordrng 1 W11736670 (Compressor) and 1 W11504448 (Evaporator capillary tube coupler) and 1 W11506620 (8mm aluminum evaporator coupler) and 1 W11566897 (Evaporator) and 1 Processcoupler (Process coupler) and 1 X20laborcode (X20 labor code) and 1 Tightkitchenwilltakelongerthannormal (Tight kitchen will take longer than normal)"
We serviced a
MAYTAG REFRIGERATOR
Model MRT311FFFZ02
Near Greenville, SC 29609
Nathan
Job Details: 01/30/2025
Evaporator was completely frosted over. Heater and heater cut outs tested in spec. RC thermistor tested in specifications. But FC didnt test right but was pushed away from ice. Cant tell if thermistor got ruined from control not defrosting or thermistor went out of specifications while freezing temps surrounded it. Ordering control board for defrost issues and fan harness because of green corrosion. Office will call and schedule return visit when parts arrive. ; ordrng 1 W11613574 (Adc control) and 1 W11609466 (Freezer harness) and 1 J13laborcode(ifwecangobackoutasap/partsinwarehouse) (J13 labor code(if we can go back out asap/parts in warehouse)) and 1 GivepartstoNathanasapplease (Give parts to Nathan asap please)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Greenville, SC 29617
Nathan
Job Details: 01/30/2025
Both doors have scratches on them. Need to order both doors. Takes 4-6 weeks to get doors in. Office will schedule return visit.; ordrng 1 LW11258450 (Refrigerator door) and 1 LW11258441 (Freezer door) and 1 U18laborcode (U18 labor code) and 1 Builderisgoingtocheckdoorsforusfordamage (Builder is going to check doors for us for damage)
We serviced a
MAYTAG WASHER
Model MVWX655DW
Near Greenville, SC 29611
Nathan
Job Details: 01/30/2025
Cancelled call says its working. Says he tried calling nut couldnt get through.
We serviced a
MAYTAG WASHER
Model MVW4505MW2
Near Seneca, SC 29678
Frank
Job Details: 01/30/2025
No errors present did test cycle and f0e5 off balance load came up.. put in drain cycle washer fills and not spins.; ordrng 1 W11740022 (Control) and 1 W11643701 (Wire harness) and 1 W11481722 (Actuator) and 1 Jobcodel14 (Job code l14)
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ1
Near Asheville, NC 28804
Kari
Job Details: 01/29/2025
Tenant sent me a video of water in tray and it appeared ~12 (hours after unit was run. He states the black hose connected to valve is wet. Gave cust est of $232.49 for valve assembly and labor. Customer agreed and is going to proceed with repair. ; ordrng 1 W11434044 (Valve assembly) and 1 L14 (Job code)
We serviced a
MAYTAG RANGE
Model MGS8800FZ5
Near Spartanburg, SC 29307
Sam
Job Details: 01/29/2025
Installed units oriface. Customer stated that flame has improved and is happy with how it is. Unit checks ok.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Piedmont, SC 29673
Larry M.
Job Details: 01/29/2025
Attempted to put run test cycle. Unit would not start. Will need pump and motor ; ordrng 1 W11613479 (Sump assembly) and 1 N15jobcode (N15 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Spartanburg, SC 29307
Sam
Job Details: 01/29/2025
Installed control and valve to unit. Cycled unit through calibration and diagnostics cycle. Bot cycles performed perfect. Cycled unit with load through heavy wash on deep water wash. Unit filled with good amount of water and agitating properly. All components working. All functions pass.
We serviced a
WHIRLPOOL OVEN
Model WFG320M0MS0
Near Fountain Inn, SC 29644
Carl
Job Details: 01/29/2025
Class separated from frame l14; used 1 W11620722 (Class) from stock
We serviced a
KITCHEN AID RANGE
Model KSDG050ESS2
Near Mauldin, SC 29662
Carl
Job Details: 01/29/2025
Installed new bake elemt cycled unit to 350 to ck operation unit ck ok
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Greenville, SC 29617
Nathan
Job Details: 01/29/2025
Needs dispenser housing because detergent funnel is broken. ; ordrng 1 W10861667 (Detergent Drawer) and 1 C1laborcode (C1 labor code) and 1 Goingtopickupfrompartsstorenextdayandtrytosneakinscheduleassoonaspossible (Going to pick up from parts store next day and try to sneak in schedule as soon as possible)
We serviced a
MAYTAG DRYER
Model MEDX655DW1
Near Greenville, SC 29605
Nathan
Job Details: 01/29/2025
Replaced timer and timer knob that broke off. Let homeowner know to turn clockwise to try and prevent future issues.
We serviced a
WHIRLPOOL WASHER
Model MVW5035MW1
Near Spartanburg, SC 29306
Sam
Job Details: 01/29/2025
Found unit shaking a lot during spin cycle with no clothes inspected inner basket and suspension rods. Suspension rods appear slightly weak but inner tub does not seem to have holes punched through all the way around basket. Will order suspension rods and inner basket. ; ordrng 1 W11130362 (Suspension rods) and 1 W11513244 (Basket) and 1 L14 (L14)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Spartanburg, SC 29307
Sam
Job Details: 01/29/2025
Found unit not wanting to progress cycles. Upon starting cycle and entering diagnostics unit activates drain pump when it is not supposed to. Checked for error codes. Unit has f1e1 error code and f3e1 error code for control failure. Gave customer estimate for repair of 597.56. Customer stated she is going to request a new one. Collected trip charge of 150.00. If customer decides to go through with repair unit will need control board. Control board W11603810.
We serviced a
WHIRLPOOL LAUNDRY CENTER
Model WFW5605MW0
Near Spartanburg, SC 29307
Sam
Job Details: 01/29/2025
Installed parts to unit. Cycled unit through quick wash. Unit progressing cycle. All components activating. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ00
Near Hendersonville, NC 28739
Brian
Job Details: 01/29/2025
"Found fill tube frozen. Found freezer temp set to the coldest setting. Thawed fill tube and tested and set freezer to recommend setting. At this time, all operations ok with no leaks detected. Did not move unit. Collected 150 for service call."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Anderson, SC 29625
Jerry D.
Job Details: 01/29/2025
"Water fill code , water and valves ok , ordering, j13; ordrng 1 W11578565 (Cntrl)"
We serviced a
MAYTAG LAUNDRY CENTER
Model MVW4505MW1
Near Anderson, SC 29625
Jerry D.
Job Details: 01/29/2025
"Found basket broken, ordering, j13; ordrng 1 W11459622 (Basket) and 1 W10721967 (Splutch)"
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Anderson, SC 29624
Jerry D.
Job Details: 01/29/2025
"Drain pump cracked, installed pump sent preid, cycled unit through test and no leaks found unit checks ok"
We serviced a
WHIRLPOOL MICROWAVE
Model JMC2427DS01
Near Belton, SC 29627
Jerry D.
Job Details: 01/29/2025
"Mrs is waiting to hear from whirlpool on coverage of repairs , cancelled for now"
We serviced a
WHIRLPOOL RANGE
Model WFES3030RW0
Near Hendersonville, NC 28792
Brian
Job Details: 01/29/2025
"Found gasket not snapping in place properly, due to frame panels being misaligned. Corrected and inserted clip properly. Customer also concerned about noise. They said its like a chirp. Preheat oven and found mounting bracket on bake element squeaking on floor of oven cavity. Adjusted and tested again. At this time, all operations ok. Did not move unit."
We serviced a
FRIGIDAIRE REFRIGERATOR
Model GRFS2853AF0
Near Hendersonville, NC 28792
Brian
Job Details: 01/29/2025
Customer said ice bin will freeze over. Tested ice maker and found ice bin fan getting proper voltage it not coming on. Also found deli drawer broken. Ice box fan (5304493604) and deli pan (5304533731) needed. Quoted customer 441.85 to replace just fan and 566.93 to replace fan and deli drawer. Customer did not wish to proceed with repairs at this time. Collected 150 for service call.
We serviced a
MAYTAG DRYER
Model MED7230HW
Near Piedmont, SC 29673
Larry M.
Job Details: 01/29/2025
"Installed thermal fuse, blower wheel, and motor. Ran test cycle. All functions pass."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Easley, SC 29640
Larry M.
Job Details: 01/29/2025
Installed element. Heater did not engage. Will need main control ; ordrng 1 W11637581 (Main control) and 1 J13jobcode (J13 job code)
We serviced a
FRIGIDAIRE REFRIGERATOR
Model GLRT217TDBC
Near Weaverville, NC 28787
Kari
Job Details: 01/29/2025
"Took quick pics, customer left water on floor to show me where it was pooling. Its all on left side in the front of unit. Pulled unit out and inspected water lines and valve. All look ok and dry. Ran ice maker and no water came from fill lines or valve. Found the bottom of Ff compartment was full of water and its dripping through door onto floor. Found the gasket to the evap fan chute was disintegrating and dripping through vent to floor when unit is defrosting. Put thicker seals between the chute and vent. And sealed drip spout to drip receiver. Unit checks ok had customer pay for TC and labor of $279.99 customer agreed and paid by card office ran."
We serviced a
WHIRLPOOL OVEN
Model WEG515S0LZ1
Near Taylors, SC 29687
Chris
Job Details: 01/29/2025
Installed new part.unit check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ10
Near Mauldin, SC 29662
Carl
Job Details: 01/29/2025
Installed new imk and control cycled imk to ck operation unit ck ok
We serviced a
KITCHEN AID OVEN
Model KFEG500EBS3
Near Simpsonville, SC 29681
Carl
Job Details: 01/29/2025
Pt auth k1da5z0wp1. Nesky w/p covering parts customer is responsible for for labor j13 will collect on return; ordrng 1 W10777210 (Oven bottom) and 1 W10779716 (Elmt bake)
We serviced a
WHIRLPOOL ICE MACHINE
Model KUID308HPS01
Near Greenville, SC 29607
Carl
Job Details: 01/29/2025
Installed new aux pump cycled unit to ck operation unit ck ok ; O-emld tckt
We serviced a
KITCHEN AID RANGE
Model KSGG700ESS6
Near Easley, SC 29642
Larry M.
Job Details: 01/29/2025
Found burn marks on backsplash indicating fire came from rear draft vent. Advised customer not to use unit. Called safety team to report. AngieSR:7740760096
We serviced a
MAYTAG REFRIGERATOR
Model MFI2269DRH01
Near Easley, SC 29642
Larry M.
Job Details: 01/29/2025
Wrong seal size. Too short. ; ordrng 1 W11396037 (Gasket)
We serviced a
KITCHEN AID KITCHEN
Model KSIB900ESS
Near Easley, SC 29642
Larry M.
Job Details: 01/29/2025
Found I not responding when attempting to turn burners on. Will need main control; ordrng 1 W11034444 (Control) and 1 W11100619 (Main control) and 1 J13jobcode (J13 job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Mars Hill, NC 28754
Kari
Job Details: 01/29/2025
"Took quick pics, found unit making a clacking noise and it gets louder some times. Ran test 212 Found units damper is making the noise. Need part for repair. ; ordrng 1 WPW10594329 (Damper) and 1 J13 (Job code)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Mars Hill, NC 28754
Kari
Job Details: 01/29/2025
"Took quick pics, found unit showing F4E3 motor open code. Checked voltage from board to motor and found only 50 V. Installed new motor and control. Ran diagnostic cycle. Unit checks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Mars Hill, NC 28754
Kari
Job Details: 01/29/2025
"Took quick pics, found unit showing 8-1 long fill and unit is on a well system. Found the cold valve full of sediment. Installed new valve. Ran diagnostic cycle. Unit checks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Burnsville, NC 28714
Kari
Job Details: 01/29/2025
Installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Belton, SC 29627
Jerry D.
Job Details: 01/29/2025
"Latch broken Cntr inoperable wont reset, ordering, j13; ordrng 1 W11414731 (Latch) and 1 W11725661 (Cntrl)"
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Columbus, NC 28722
Brian
Job Details: 01/29/2025
"Found no saved error codes. Found no hot water hooked up to unit. Tested unit in diagnostics and found unit completing without issues. Also started a normal cycle and unit completed. Contacted tech support and spoke to Drew. I informed him of situation. We checked and made sure pressure hose is clear. Given that unit is working at the time, he did not recommend replacing any parts. Reviewed with customer about detergent use and recommended customer clean washer with affresh about once a month. Customer understood. Sr number (7740842736)"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Columbus, NC 28722
Brian
Job Details: 01/29/2025
"Found door dropping down. Inspected and found RH hinge had fallen out of position. Corrected and tested and found door now functioning properly. Informed customer that if issue happens again, left hinge (W11712995) and right hinge (W11712996) may need to be replace. Quoted customer 487.95 to replace hinges. Collected 160 for todays work."
We serviced a
WHIRLPOOL RANGE
Model WFES3530RS0
Near Boiling Springs, SC 29316
Sam
Job Details: 01/29/2025
Found units handle cracked at mounting where screw goes. Checked mount found screw backing out of one side of handle causing handle to fall and twist cracking mount that holds handle. Unit will need new handle. Will order for repair.; ordrng 1 W11730234 (Handle door) and 1 J13 (J13)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ17
Near Columbus, NC 28722
Brian
Job Details: 01/29/2025
"Found freezer door not closing all the way, properly. Adjusted both doors and found doors now closing and sealing. At this time all operations ok with no leaks detected. Did not move unit."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FMDM10
Near Boiling Springs, SC 29316
Sam
Job Details: 01/29/2025
Found unit not cooling. Found units starter clicking on and then off after a few seconds. Compressor never tries to come on. Will order new starter device for repair.; ordrng 1 W11547180 (Start device) and 1 J13 (J13)
We serviced a
WHIRLPOOL RANGE
Model WEE745H0LZ3
Near Inman, SC 29349
Sam
Job Details: 01/29/2025
Installed all parts. Cycled unit to 350 bake and cycled all burners. All activating and getting to proper temperature. Checked fans. Fans operating. Checked door switch door switch operating light coming on and off with door switch. Checked cook top on and hot indicators both working. All functions pass.
We serviced a
WHIRLPOOL DRYER
Model WED8127LC2
Near Greer, SC 29650
Chris
Job Details: 01/29/2025
Unit is completely dead . Ui wouldnt power up . Unit has interior light on . Voltage good at terminal block. Found loose screw on terminal block.tightened screw and re applied power. Unit began working . If problem persists unit will need new user interface. Gave customer a blue book estimate at $757.67. Ran unit several times after securing connection . No stored faults . Unit works as designed at this time
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Greer, SC 29651
Chris
Job Details: 01/29/2025
Unit has shorted wash motor. Replaced from stock. Unit check is ok . No leaks
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS10
Near Greer, SC 29651
Chris
Job Details: 01/29/2025
Found cabinet rattle . Shimmed cabinet/wrapper. Unit check is ok . New authorization is w1da9t1nl2
We serviced a
MAYTAG WASHER
Model MVW5435PW1
Near Inman, SC 29349
Chris
Job Details: 01/29/2025
"Oil residue on Geacase . Found shifter not extending all of the way putting cam in bind. Replaced parts from stock. Unit check is ok . New auth is m1da9u1nl1.5; used 1 W11481722 (Shifter), and 1 W10721967 (Cam) from stock"
We serviced a
JENN AIR REFRIGERATOR
Model JUCFP242HX11
Near Greenville, SC 29609
Nathan
Job Details: 01/29/2025
Back half of filter housing broke off trying to get filter in because it was a really tight fit. Need to order filter housing and foam for dampening because old foam will tear up trying to remove. Looked up filter housing and its supposed to be one piece but back half separated when homeowner tried replacing filter. Office will call and reschedule return visit when parts arrive. ; ordrng 2 W11580302 (Filter block)s and 1 W11594479 (Filter housing) and 1 W10281589 (Filter tape) and 1 L14laborcode (L14 labor code)
We serviced a
JENN-AIR DISHWASHER
Model JDTSS246GP0
Near Greenville, SC 29605
Nathan
Job Details: 01/29/2025
Quoted $654.32 to replace sump assembly. Diverted is leaking and wicked up right side. Pulled out dishwasher to make sure tub or heater wasnt leaking. Homeowners accepted quote $327.16 is due today and $327.16 due upon completion. ; ordrng 1 W11178672 (Sump and motor assembly) and 1 L14laborcode (L14 labor code)
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFF507HPS02
Near Greenville, SC 29605
Nathan
Job Details: 01/29/2025
"Replaced main control for no fan operation in diagnostics,cooling, and ice maker issues. Checked to see if fans work in diagnostics and set ads to 8 hour defrost. Everything should be performing as designed. 13.6 Im thermistor. Tech line says Jake to replace the refrigerator thermistor and ice box fan file 7740840979. Replaced thermistor with truck stock part. When trying heater it stated it had a thermistor short so I called tech line again to confirm which thermistor and he said to replace the ice maker that has the thermistor on it. ; ordrng 1 W11658802 (Ice maker) and 1 J13laborcode (J13 labor code), used 1 WPW10384183 (Thermistor) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Greenville, SC 29607
Nathan
Job Details: 01/29/2025
Ice maker auger isnt letting ice out unless bucket is pushed down. If bucket is pushed down it only allows a little bit of ice through unless you keep pressure on it. Says stuff on top shelf is freezing milk and had some water thats freezing on top. ; ordrng 1 W11347840 (Ice bucket) and 1 WPW10258544 (Auger shaft) and 1 W10852956 (Spring) and 1 WP2220458 (Auger coupling) and 1 W11202789 (Auger motor) and 1 W11236851 (Diffuser) and 1 W11724692 (Thermistor RC) and 1 N15laborcode (N15 labor code)
We serviced a
KITCHEN AID OVEN
Model KSGG700ESS7
Near Greenville, SC 29607
Nathan
Job Details: 01/29/2025
Homeowner had gas pressure checked and they said that gas pressure was good. Everything on oven is very low pressure. Need to order gas valve that has regulator on it. Told homeowner to not use the oven until regulator comes in. Office will call and schedule return visit when part arrives. ; ordrng 1 W10861656 (Gas regulator) and 1 N15laborcode (N15 labor code) and 1 GiveparttoNathantosneakinpleasetakesaboutanhourandshecantuseoven (Give part to Nathan to sneak in please takes about an hour and she cant use oven)
We serviced a
WHIRLPOOL WASHER
Model WTW8500DC0
Near Columbus, NC 28722
Brian
Job Details: 01/29/2025
"Found f7e5 (shifter failure) F2e1 (stuck button). Tested unit in diagnostics and found it not spinning. Checked and found washplate loose on shaft. Attempted to remove washplate and could not. Tightened washplate. Attempted to remove rotor and could not. After tightening washplate, I tested unit again. Unit is passing diagnostics test. Also tested unit in normal cycle. Unit started cycle ok. If issue happens again, screw (W10752187) may be needed. However, if washplate or any other drive or motor components need to be replaced, we would have to replace inner and outer wash tub as well as gearcase and all motor components. Quoted customer 273.86 to replace screw. Customer did not wish to proceed with repairs at this time. Collected 150 for service call."
We serviced a
WHIRLPOOL WASHER
Model WTW6150PB0
Near Asheville, NC 28801
Brian
Job Details: 01/28/2025
Customer says sometimes the unit will lock her out and she cant open it and other times it wont drain. Found no saved error codes. Tested unit in diagnostic and f0e3 (over load) error after diagnostic cycle. Basket and agitator is spinning freely. Cleared code and tested again and found same issue. Clutch (W10754448) Stator (W11195971) slider (W10734521) and control (W11627517) needed. ; ordrng 1 W11627517 (Control) and 1 W11195971 (Stator) and 1 W10754448 (Clutch) and 1 W10734521 (Slider) and 1 L14 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ12
Near Asheville, NC 28803
Brian
Job Details: 01/28/2025
Customer had painters working on the house and had unit inaccessible. Customer will need to reschedule. Did not touch or service unit. ; O-emld tckt
We serviced a
WHIRLPOOL DRYER
Model WED7300DW1
Near Fountain Inn, SC 29644
Chris
Job Details: 01/28/2025
Unit needs repair kit for squeaking noise. Gave customer a bluebook estimate for repair at $427.21. Installed new parts. Unit check is ok ; used 1 4392065 (Repair kit) from stock
We serviced a
KITCHEN AID REFRIGERATOR
Model KRFC604FSS00
Near Pendleton, SC 29670
Frank
Job Details: 01/28/2025
unit moved out on arrival.. leaking from valve.. warped floor boards. Bb quoted 556.49.. ordering hose for imk just in case.. paid $278.25. Owe $ 278.25; ordrng 1 W11312191 (Valve) and 1 Jobcodel14 (Job code l14)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS335SDHM07
Near Pendleton, SC 29670
Frank
Job Details: 01/28/2025
"In compressor tested condenser coil touching each other.. separated them, not buzzing anymore"
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Greenville, SC 29611
Nathan
Job Details: 01/28/2025
Replaced latch and tested operation. Everything is performing as designed.
We serviced a
KITCHEN AID REFRIGERATOR
Model KSSC42QVS03
Near Greenville, SC 29605
Nathan
Job Details: 01/28/2025
Got refrigerator to run after power cycling user interface 7740832283 Adrian from techline says there may be an issue with the user interface or may have had a glitch. Relay on board is cycling so he told me if clicking on relay stops when fan is unplugged its the fan but if it keeps clicking its the board. Quote to replace evaporator fan is $562.20. Charging card half $281.10 today for refrigerator and the same when repair is complete. Office will call and schedule return visit when parts arrive. ; ordrng 1 W11671461 (Evaporator moror) and 1 N15laborcode (N15 labor code)
We serviced a
JENN-AIR OVEN
Model JMW2427DS01
Near Candler, NC 28715
Kari
Job Details: 01/28/2025
Installed parts unit checks ok. Customer paid balance of $1302.18 via check. Emailed receipt