We serviced a
WHIRLPOOL RANGE
Model WFES3530RS0
Near Duncan, SC 29334
Sam
Job Details:
11/22/2024
Found unit missing support bracket underneath control panel. Will order support bracket for repair.; ordrng 1 W11443964 (Bracket)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Pauline, SC 29374
Sam
Job Details:
11/22/2024
Found unit not defrosting again. Checked amp draw at power cord in forced defrost no amps present. Called techline. Techline had me do checks at control board and on new harness and heater in freezer section. From checks done techline determined that there is a wire that is broken somewhere in the cabinet causing heater to not be activated. Techline deemed unit as not repairable and to give customer file number and direct them to customer service. SR#7740386455
We serviced a
KITCHEN AID DISHWASHER
Model KUDM03FTSS3
Near Spartanburg, SC 29306
Sam
Job Details:
11/22/2024
Installed new mount and cable for door hinge. Open and closed door multiple times. Units door holding and not swinging open now. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Spartanburg, SC 29306
Sam
Job Details:
11/22/2024
Installed parts. Cycled power to unit. Lights coming on. Tested functions through drain and spin. All components working. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB533CZJB00
Near Asheville, NC 28801
Brian
Job Details:
11/22/2024
"According to entitlement unit is still in first year warranty. Plugged unit in and found compressor coming on, and evaporator fan running but no frost pattern. Sealed system repairs needed. Compressor (W11370574) coupling (W10895713) coupling (W10895723) coupling (W10895750) coupling (W11506635) dye drier (Wpw10143759) r600a; ordrng 1 W11370574 (Compressor) and 1 W10895713 (Coupling) and 1 W10895723 (Coupling) and 1 W10895750 (Coupling) and 1 W11506635 (Coupling) and 1 Wpw10143759 (Dye drier) and 1 R600a (R600a) and 1 Sealedsystemtech (Sealed system tech) and 1 X20 (Job code)"
We serviced a
JENN-AIR REFRIGERATOR
Model JF42NXFXDE05
Near Salem, SC 29676
Jerry D.
Job Details:
11/22/2024
Tech was assigned as a helper;
We serviced a
KITCHENAID ICE MACHINE
Model KUIX335HPS01
Near Greenville, SC 29609
Carl
Job Details:
11/22/2024
Found tab on drain pump brokenj13; ordrng 1 W10897719 (Valve) and 1 J13 (Labor)
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Greenville, SC 29607
Carl
Job Details:
11/22/2024
Installed new control ran diagnostics and a test cycle to check operation unit ck ok
We serviced a
KITCHENAID COOKTOP
Model KCED600GBL01
Near Simpsonville, SC 29681
Carl
Job Details:
11/22/2024
Installed new glass top applied power and cycled burners to ck operation unit ck ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Anderson, SC 29625
Carl
Job Details:
11/22/2024
Installed new ice door and seale the gaps between the liner and cabinet unit ck ok
We serviced a
WHIRLPOOL RANGE
Model WFC315S0JB3
Near Asheville, NC 28801
Brian
Job Details:
11/22/2024
"Unit not installed when I arrived. Maintenance installed unit and we tested. Found all surface burners ok and oven ok. At this time, all operations ok. Collected 150 for service call."
We serviced a
MAYTAG WASHER
Model MVWP586GW0
Near Candler, NC 28715
Brian
Job Details:
11/22/2024
"Found service pointer regarding software issues for fill issues. Also found valve had debris in it. Replaced control per service pointer and valve. Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
MAYTAG WASHER
Model MVWC300XW0
Near Boiling Springs, SC 29316
Sam
Job Details:
11/22/2024
Installed parts to unit. Cycled unit. Unit now agitating properly. All functions pass.
We serviced a
WHIRLPOOL OVEN
Model WOD51EC0HS20
Near Boiling Springs, SC 29316
Sam
Job Details:
11/22/2024
Found unit completely locked up saying controls are locked. Called techline. Techline stated units software in the user interface is bad and will need new user interface for repair. Will order user interface for repair. SR#7740382866; ordrng 1 W11600355 (User interface) and 1 L14 (L14)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ11
Near Inman, SC 29349
Sam
Job Details:
11/22/2024
Installed spigot. Cycled dispenser. Dispenser for water no longer dripping. All components working. all functions pass.
We serviced a
WHIRLPOOL KITCHEN
Model WVW53UCOLS
Near Inman, SC 29349
Sam
Job Details:
11/22/2024
Found units filters for hood cracked at where tabs hold filter in place. Will order new filters for repair.; ordrng 2 WP8190836 (Filter)s and 2 W11568741 (Filter)s and 1 L14 (L14)
We serviced a
MAYTAG WASHER
Model MVW5435PW0
Near Black Mountain, NC 28711
Kari
Job Details:
11/22/2024
"Took quick pics found unit not draining. Cleared all water Found drain pump, impeller not turning found it seized up and would not move. Installed new drain pump ran diagnostics cycle unit checks OK; used 1 W11399437 (Drain pump) from stock"
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Black Mountain, NC 28711
Kari
Job Details:
11/22/2024
"Took quick pics, found unit had been under about 3 feet of water due to the hurricane. Found unit showing 7-6 code. Found unit willl fill and drain fine but wont spin or agitate. Found the unit full of dirt and the gearcase/motor parts have been affected by the water. Would need for repair. Cust is on the fence about buying a new one. ; ordrng 1 Callcustomerinafewdays (To check if hes buying a new one)"
We serviced a
WHIRLPOOL OVEN
Model WFG320M0MS0
Near Powdersville, SC 29673
Larry M.
Job Details:
11/21/2024
Replaced bottom brackets. Realigned seal. All functions pass.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ0
Near Piedmont, SC 29673
Larry M.
Job Details:
11/21/2024
Replaced screw and studs. Installed handle. All functions pass
We serviced a
MAYTAG WASHER
Model MVW5435PW0
Near Anderson, SC 29621
Frank
Job Details:
11/21/2024
Replaced control and latch .. tested quick cycle running washing ok
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Anderson, SC 29621
Frank
Job Details:
11/21/2024
Replaced motor and blower wheel.. tested working ok when no clothes are in.. motor seems like it could be rubbing alittle on cabinet
We serviced a
WHIRLPOOL COOKTOP
Model WFE515S0JS4
Near Seneca, SC 29678
Frank
Job Details:
11/21/2024
Found element ohm's good. Switch not sending 240 to element.. need switch number WP3149400.. no truck stock.. ; ordrng 1 WP3149400 (Switch) and 1 Jobcodel14 (Job code)
We serviced a
MAYTAG DRYER
Model MED6230HW3
Near Easley, SC 29640
Larry M.
Job Details:
11/21/2024
Found unit not responding to commands and not activating element. Will need UI; ordrng 1 W11413566 (Control panel) and 1 J13jobcode (J13 job code)
We serviced a
KITCHENAID MICROWAVE
Model KMBP100ESS01
Near Greenwood, SC 29649
Jerry D.
Job Details:
11/21/2024
Found interior light out replaced light now operating normal
We serviced a
MAYTAG LAUNDRY CENTER
Model MVW5435PW0
Near Hendersonville, NC 28791
Brian
Job Details:
11/21/2024
"Installed all parts ordered. Calibrated and tested and found all operations ok at this time,with no leaks detected."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Hendersonville, NC 28792
Brian
Job Details:
11/21/2024
Found f8e1 (long fill) tested unit and found cold water entering unit slowly. Checked and found no debris in the valve. Checked water pressure from hoses themselves and found cold water from wall had very low water pressure. Informed customer that they would have to have a plumber check out incoming water to resolve issue. Customer understood.
We serviced a
KITCHENAID RANGE
Model KSGB900ESS8
Near Barnardsville, NC 28709
Kari
Job Details:
11/21/2024
Customer got authorization. Ordering parts rescheduled for 11/27 PM ; ordrng 1 W10861656 (Regulator) and 1 W10860916 (Dsi)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Greenville, SC 29617
Larry M.
Job Details:
11/21/2024
Replaced both controls. All functions pass.
We serviced a
WHIRLPOOL RANGE
Model WFES3330RZ0
Near Fletcher, NC 28732
Brian
Job Details:
11/21/2024
Found one of the gasket pins had come out of place. Reinstalled gasket pin and found all operations ok at this time. Did not move unit.
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ09
Near Asheville, NC 28805
Brian
Job Details:
11/21/2024
Tested unit and found it reading as if door is not closed. Also found hood fan not coming on. New Interlock (W11551761) interlock (W11551558) and control (W11552018) needed.; ordrng 1 W11551761 (Interlock) and 1 W11551558 (Interlock) and 1 W11552018 (Control) and 1 L14 (Job code)
We serviced a
MAYTAG DISHWASHER
Model MDB4949SHZ0
Near Greer, SC 29651
Sam
Job Details:
11/21/2024
Found unit not washing dishes. Cycled unit through diagnostics found error codes for not heating and not filling with water. Found that sump assembly is not circulating water and just humming. Unit will need new sump. Gave customer estimate of 623.84 customer declined estimate. Collected trip charge of 150.00.
We serviced a
KITCHEN AID DISHWASHER
Model KDTE334GPS0
Near Greer, SC 29651
Sam
Job Details:
11/21/2024
Found units adjuster cracked on rack. Gave customer estimate for adjuster of 257.00. Customer approved of estimate. Customer will pay for half today and half on return. Collected 128.50 today leaving remaining balance of 128.50 on return visit with install of new part. ; ordrng 1 WPW10546503 (Adjuster) and 1 L14 (L14)
We serviced a
WHIRLPOOL REFIRGERATOR
Model ED5LVAXWB02
Near Inman, SC 29349
Sam
Job Details:
11/21/2024
Found units gasket on freezer section splitting in bottom corner. Will order gasket for freezer for repair. ; ordrng 2 2159082 (Gasket)s and 1 L14 (L14)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Chesnee, SC 29323
Sam
Job Details:
11/21/2024
Installed inverter box to unit. Cycled power to unit. Compressor started and running. Unit starting to cool. All components working. All functions pass.
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Pickens, SC 29671
Larry M.
Job Details:
11/21/2024
Replaced basket. Ran calibration cycle. Checks ok. Called techline. Suggested that sound will need to be replicated and if so replace slider. Sr: 7740378873; ordrng 1 W10734521 (Slider)
We serviced a
WHIRLPOOL RANGE
Model WEG745H0FS
Near Travelers Rest, SC 29690
Larry M.
Job Details:
11/21/2024
Replaced Ui. Ensured all functions worked properly. Checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Hodges, SC 29653
Jerry D.
Job Details:
11/21/2024
Installed new ice box fan. found horizonal mullen still sweeting called tech line talked to TJ he advized to stop the condenser fan and see if mullem gets warm. I stopped the fan left it 15 minutes and i found the mullen still cold. hot gas tube foamed in and is too far from mullen. Called tech line back and talked to Austin he is putting it up for exchange SR7740376703
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Asheville, NC 28804
Brian
Job Details:
11/21/2024
"Installed new main wire harness. Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL WASHER
Model wtw4957pw0
Near Easley, SC 29640
Carl
Job Details:
11/21/2024
Outter tub damaged ; ordrng 1 W10371566 (Outter tub)
We serviced a
MAYTAG WASHER
Model MVW7230HC1
Near Spartanburg, SC 29303
Sam
Job Details:
11/21/2024
Customer complaint is that unit makes clanking noise when in use and that unit sometimes will not spin.checked error codes. No error codes found. Checked underneath unit found units screw to stator/rotor completely off of unit lying on floor. Reinstalled screw with more blue loctite. Cycled unit through drain and spin w/rinse while having load. Unit performed all functions properly. Clanking sound in spin no longer present. Unit checks ok.
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Spartanburg, SC 29301
Sam
Job Details:
11/21/2024
"Customer states unit shakes a lot and doesnt agitate for wash it only spins. Checked for error codes. Found error codes f0e3 and f7e9 for over load and locked rotor. Checked suspension rods of unit. Suspension rods weak and has a lot of play, unit will need new suspension rods. Checked underneath unit found clutch not wanting to activate and move slider or slider is just not engaging fully when clutch activates every time. Unit will need new clutch and slider also.; ordrng 1 Q16 (Q16) and 1 W10754448 (Clutch) and 1 W10734521 (Slider)"
We serviced a
MAYTAG RANGE
Model MER8800FZ2
Near Candler, NC 28715
Kari
Job Details:
11/21/2024
"Installed parts, unit checks ok. Customer paid in full first trip."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Candler, NC 28715
Kari
Job Details:
11/21/2024
"Derek @techline Found unit doing same thing as last time. Called techline. Spoke with Derek, told him history and todays findings. He stated the logic on these has never been in the ui and only in the high voltage board unless it is a stealth ui. I told him this is not what I have been told by techline about this model previously. I installed thermistor and checked continuity on 9 pin harness all checks good, evap and condenser fans run. Defrosted all ice need acu for complete repair. ; ordrng 1 W11742389 (Main control) and 1 N15 (Job code)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Candler, NC 28715
Kari
Job Details:
11/21/2024
"Took quick pics, found unit pantry cover left holder is broken and cover wont stay on need pantry holder for repair. ; ordrng 1 W10874836 (End cap kit) and 1 J13 (Job code)"
We serviced a
JENN AIR REFRIGERATOR
Model JFFCF72DKL04
Near Waynesville, NC 28786
Kari
Job Details:
11/21/2024
"Installed part, defrosted all ice checked functions. Unit checks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQA59CNKZ
Near Waynesville, NC 28786
Kari
Job Details:
11/21/2024
"Took quick pics, found unit blowing air between left ff and fz doors. Found all 4 doors sealing properly against the metal. Found freezer door gasket not snug enough in channel, took both doors gaskets out and glued them in with RTV silicone all the way around. Found. No codes stored. Ran unit through all diagnostic functions and with fans on and compressor running there is no air escaping now. Unit checks ok; used 1 WP482338 (Silicone) from stock"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Easley, SC 29640
Carl
Job Details:
11/21/2024
Outter tub damaged; ordrng 1 W11219115 (Outter tub)
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Seneca, SC 29678
Frank
Job Details:
11/21/2024
"Called Techline Sr.. 7740373502.. found shield broke off, gearcase has bad squealing.. had off balance error.. replacing suspension and gearcase and shield and harness; ordrng 1 W11449840 (Gearcase) and 1 W10721967 (Cam) and 1 WPW10550173 (Shield) and 1 W11239857 (Belt) and 1 Jobcodeq16 (Job code q16) and 1 W11130362 (Suspension)"
We serviced a
WHIRLPOOL OVEN
Model WEG745H0LZ5
Near Piedmont, SC 29673
Frank
Job Details:
11/21/2024
Adjusted probe to be closer to burner in oven.. calibrated unit ok.. was heating good brought offset up 5 degrees..
We serviced a
WHIRLPOOL WASHER
Model WTW4815EW1
Near Simpsonville, SC 29681
Jerry D.
Job Details:
11/21/2024
assisted other tech on repair
We serviced a
KITCHEN AID RANGE
Model KSEG700ESS6
Near Travelers Rest, SC 29690
Larry M.
Job Details:
11/21/2024
Found convention fan making tapping noise. Quoted customer $640 to replace. Customer approved. Replaced convection fan. Ran test bake cycle.checks ok. Customer paid $640 by check.
We serviced a
KITCHENAID MICROWAVE
Model KOCE500ESS22
Near Greenville, SC 29601
Larry M.
Job Details:
11/21/2024
Installed inverter. F1e5 error code came back. Will need magnetron and inverter. Balance of 838.91 due; ordrng 1 W11578959 (Magnetron) and 1 W11578579 (Inverter) and 1 2manjobcode (2 man job code) and 1 N15jobcode (N15 job code)
We serviced a
WHIRLPOOL COOKTOP
Model KDRS505XSS02
Near Greer, SC 29650
Carl
Job Details:
11/21/2024
"1 ,WPW10298678, WPW10206287, l14 ,s/c = 637.07 if customer calls back Found valves frozen cant turn"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS04
Near Pauline, SC 29374
Jerry D.
Job Details:
11/20/2024
Installed new fan motor assy and leveled french doors all operations normal (by JR)
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Asheville, NC 28803
Brian
Job Details:
11/20/2024
Customer said unit will not complete cycle and will shut down and wont work until they reset the power to the machine. Found no saved error codes. Found Shifter (W11481722) cam (W10721967) control (W11607637); ordrng 1 W11481722 (Shifter) and 1 W10721967 (Cam) and 1 W11607637 (Control) and 1 J13 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WZF34X18DW07
Near Liberty, SC 29657
Frank
Job Details:
11/20/2024
"Found when unit on wasn't sending 120v to compressor.. checking voltage at board compressor and EVAP fan came on. Would run a few minutes then stop, no voltage to compressor and EVAP fan.. when in diagnostics mode had compressor running EVAP fan running, not cooling. Ordering board, thermistor and compressor to redo refrigerant.. ; ordrng 1 Jobcodex20 (Job code x20) and 1 Sealedsystemtech (Sealed system tech) and 1 R600a (R600a) and 1 W11648345 (Control) and 1 WPW10384183 (Thermistor) and 1 W11547313 (Compressor) and 1 w11506635 (Access port) and 1 W11109499 (Dryer)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Six Mile, SC 29682
Frank
Job Details:
11/20/2024
"Replaced diffuser,, tested in mode 3 working ok.."
We serviced a
KITCHEN AID REFRIGERATOR
Model KRMF706EBS01
Near Six Mile, SC 29682
Frank
Job Details:
11/20/2024
Found temps in rc and fc at 50 degrees.. ice box fan not coming onin test 36. Measured voltage getting 12v move wire harness 0 v ..Called Techline.. 7740367878. Deeming unrepairable.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Inman, SC 29349
Sam
Job Details:
11/20/2024
Installed fan to unit. Unit still making same noises. Called techline. Explained to techline that high and low pitched noises were coming from evaporator coil from the way that it sounded. Techline advised to take drier filter and turn it as horizontal as I can without breaking it to help issue. Rotate capture and drier filter horizontally. All sounds appear to be normal currently. Told customer to give us a call back if unit proceeds to have same noises. SR#7740371066
We serviced a
MAYTAG WASHER
Model MVWX655DW1
Near Boiling Springs, SC 29316
Sam
Job Details:
11/20/2024
Installed all parts. Cycled unit through bulky cycle with load. Unit performed perfectly no abnormal amount of shaking and banging like before. All components working. All functions pass.
We serviced a
KITCHENAID WALL OVEN/MW
Model KOEC530PSS00
Near Asheville, NC 28803
Brian
Job Details:
11/20/2024
Found left and right side of door not closing properly. Inspected and found LH hinge (W11665203) rh hinge (W11665204) in need of replacement. ; ordrng 1 W11665203 (LH hinge) and 1 W11665204 (RH hinge) and 1 L14 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM08
Near Spartanburg, SC 29301
Sam
Job Details:
11/20/2024
Customer complaint is unit randomly trips breaker. Called techline. Techline said based on amp draw of heating element during defrost and since compressor has been running and unit has not tripped in 4 days it was most likely something to do with the house and not the refrigerator. Techline stated at the time unit is working as designed. Told customer if they have more issues to give us a call back. Job complete.SR#7740367952
We serviced a
AMANA REFRIGERATOR
Model ART318FFDB11
Near Greenville, SC 29611
Larry M.
Job Details:
11/20/2024
Could not reach customer. After 5. Will need to reschedule ;
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Piedmont, SC 29673
Larry M.
Job Details:
11/20/2024
Replaced suspension ran test cycle. Checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW5105HC
Near Greenville, SC 29609
Larry M.
Job Details:
11/20/2024
"F7E1, F5E4 error codes. Will need actuator and capacitor. ; ordrng 1 W11556728 (Control) and 1 W11481722 (Actuator) and 1 J13jobcode (J13 job code)"
We serviced a
WHIRLPOOL REFIRGERATOR
Model WRV986FDEM01
Near Pickens, SC 29671
Larry M.
Job Details:
11/20/2024
Replaced Ui and control board. Powered unit back on and no lights or water. Customer would like second opinion. ; ordrng 1 W11109595 (Evap motor) and 1 WPW10624574 (Control) and 1 J13jobcode (J13 job code)
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW0
Near Inman, SC 29349
Sam
Job Details:
11/20/2024
Unit has many issues. Unit will not spin or agitate all the time. When unit does spin its shakes a lot and throws off balance load error code. Cannot get unit to function will order many parts for repair as worst case scenario.; ordrng 1 W11260238 (Rotor) and 1 W11195971 (Stator) and 1 W10754448 (Clutch) and 1 W11178227 (Basket) and 1 W11510463 (Control) and 1 Q16 (Q16)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Easley, SC 29640
Larry M.
Job Details:
11/20/2024
"Replaced gearcase, cam kit, and belt. Ran test cycle. All functions pass."
We serviced a
KITCHENAID RANGE
Model KSGG700ESS6
Near Easley, SC 29642
Larry M.
Job Details:
11/20/2024
Found lower heat with gap. Closed gap. All functions pass.
We serviced a
WHIRLPOOL KITCHEN
Model WDP540HAMZ4
Near Six Mile, SC 29682
Frank
Job Details:
11/20/2024
"Replaced sump and motor. Tested cycle running ok. Checked for leaks,no leaking.."
We serviced a
KITCHEN AID COOKTOP
Model KCGS350ESS00
Near Seneca, SC 29672
Frank
Job Details:
11/20/2024
Found no burner would spark. Getting gas ok.. found plug halfway out of out let.. tested outlet good.. plugged into wall better working ok now.
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Fletcher, NC 28732
Brian
Job Details:
11/20/2024
"Found pantry door damaged, preventing doors from sealing properly. Pan (W10860197) and front (W11226806) needed, ; ordrng 1 W10860197 (Pan) and 1 W11226806 (Front) and 1 F12 (Job code)"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Fletcher, NC 28732
Brian
Job Details:
11/20/2024
"Installed main control and encoder. Calibrated and tested unit observing for leaks and proper functions. At this time, all operations ok with no leaks detected."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ18
Near Simpsonville, SC 29681
Carl
Job Details:
11/20/2024
Installed new harness and fan unit ck ok
We serviced a
FRIGIDAIRE OVEN
Model FEB798CCBE
Near Greenville, SC 29607
Carl
Job Details:
11/20/2024
Found bad relay board and temp probe is out of range
We serviced a
KITCHENAID DISHWASHER
Model KDTM604KPS0
Near Simpsonville, SC 29680
Carl
Job Details:
11/20/2024
Installed new pump Ran diagnostics and a test cycle unit ck ok
We serviced a
KITCHENAID REFRIGERATOR
Model O
Near Simpsonville, SC 29681
Carl
Job Details:
11/20/2024
Removed old compressor installed new compressor installed 5.5 oz r134 a week have a floating restriction ; ordrng 1 WPW10643261 (Evap ref) and 1 Nitrogen (Tool) and 1 WPW10239732 (Fc evap)
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Spartanburg, SC 29301
Sam
Job Details:
11/20/2024
Installed control and user interface. Cycled power to unit. Units light on control and lights to user interface coming on. Cycled unit through quick wash. All components working. All functions pass.
We serviced a
MAYTAG DISHWASHER
Model MDB9959SKZ0
Near Spartanburg, SC 29307
Sam
Job Details:
11/20/2024
Installed parts to unit. Cycled unit through quick wash. All components working. Unit draining again not getting error code flashing up anymore. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZ02
Near Brevard, NC 28712
Jerry D.
Job Details:
11/20/2024
assited with repair
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Fletcher, NC 28732
Brian
Job Details:
11/20/2024
"Unit pulled out and unplugged when I arrived. Plugged unit in and found compressor attempting to come on and buzzing loudly and then shutting off. Sealed system repairs needed. Found sealed system repairs covered under manufacturer warranty, according to entitlement. Compressor (W11557425) coupler (W11504416) coupler (W11504431) coupler (W11506621) coupler (W11506635) evaporator (W11550396) coupler (W11504423) coupler (W11504415) dye drier (wpw10143759). Collected 150 for service call. Left unit unplugged and pulled out. ; ordrng 1 W11557425 (Compressor) and 1 W11504416 (Coupler) and 1 W11504431 (Coupler) and 1 W11506621 (Coupler) and 1 W11550396 (Evaporator) and 1 W11504423 (Coupler) and 1 W11504415 (Coupler) and 1 Wpw10143759 (Dye drier) and 1 X20 (Job code) and 1 Sealedsystemtech (Sealed system tech) and 1 R600a (R600a)"
We serviced a
KITCHENAID OVEN/MW COMBO
Model KOEC530PSS00
Near Hendersonville, NC 28739
Brian
Job Details:
11/20/2024
"Found noise coming from turn table, when spinning. Turn table (W11373838) ring (W11110134) shaft (W11179756) motor (W10911403) cover (W11676353); ordrng 1 W11373838 (Turn table) and 1 W11110134 (Ring) and 1 W11179756 (Shaft) and 1 W10911403 (Motor) and 1 W11676353 (Cover) and 1 L14 (Job code)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZ02
Near Brevard, NC 28712
Brian
Job Details:
11/20/2024
"Tested and found leak at dye drier. Replaced dye dryer and ensured it was sealed properly. Checked pressures and found sealed system ok at this time and starting to cool. At this time, all operations ok with no leaks detected."
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Seneca, SC 29678
Frank
Job Details:
11/20/2024
F6e3. F7e9 f0e5 .. replaced slider was defective.. tested quick cycle.. agitating and spinning ok.; used 1 W10734521 (Slider) from stock
We serviced a
MAYTAG KITCHEN
Model MDB4949SKZ3
Near Pauline, SC 29374
Sam
Job Details:
11/20/2024
Found units panel on new machine warped. Replaced panel from pre ID. Cycled unit through quick wash cycle for about 10 minutes. All components working. All functions pass.
We serviced a
AMANA DRYER
Model NGD4655EW1
Near Anderson, SC 29625
Frank
Job Details:
11/20/2024
Igniter not ohm's good.. replaced.. valve tested open load at one valve.. ; ordrng 1 W10823508 (Gas burner) and 1 Jobcodel14 (Job code l14)
We serviced a
KITCHENAID RANGE
Model KSGB900ESS8
Near Barnardsville, NC 28709
Kari
Job Details:
11/20/2024
Took quick pics found unit sparking in oven but no ignition. No gas smell either. Found the regulator showing 216 ohms on each valve it looks like dsi is only sending 6acv to valve. Need both dsi and regulator for repair. Gave cust est of $917.25 customer declined and is calling whirlpool. Had office run cc for $150 and email receipt.
We serviced a
KITCHENAID OVEN
Model KOEC530PSS00
Near Weaverville, NC 28787
Kari
Job Details:
11/20/2024
"Took quick pics, found units oven showing 9-0 and 1-1 errors. Found product is wired correctly but the board keeps throwing the 1-1 after its cleared out. Found that it will still heat the oven but once it reaches temp it will throw code and shut heat off. Need control for complete repair. Rescheduled for 12/4 Pm; ordrng 1 W11448962 (Oven manager) and 1 N15 (Job code)"
We serviced a
KITCHEN AID DOUBLE WALL OVEN
Model KFID500ESS02
Near Marshall, NC 28753
Kari
Job Details:
11/20/2024
"Installed parts, unit checks ok. Had office run cc for balance of $765.09 and email receipt"
We serviced a
MAYTAG WASHER
Model MHW5630MBK0
Near Mars Hill, NC 28754
Kari
Job Details:
11/20/2024
"7740365425Took quick pics, found unit showing no codes, found unit would go through test 12 all the way with no issues and no codes. Ran unit through entire quick wash, all functions check ok. Did notice spin speed was set on slow. Customer is using this for towels and sheets since its an air bnb and washing everything on quick wash. Called techline and reported this for documentation. Did find unit to have excessive suds and found on quick wash they were using almost a whole cup of detergent per load, advised cleaners to use the 1 line or less on fill cup for that kind of cycle and also let cleaning lady know quick wash for loads of sheets and towels is not ideal and will sometimes produce less than ideal washing results. Unit is working as designed advised customer to run cleaning cycle with affresh tab"
We serviced a
KITCHENAID RANGE
Model KSEG950ESS6
Near Burnsville, NC 28714
Kari
Job Details:
11/20/2024
"Took quick pics, unit showing 9-0 miswired range/house. Cleared codes Ran through auto test and found the convection fan and cooling fan extremely loud. Test completed and same error was found. Cleared errors. Had customer turn off breaker and I pulled unit out. Took off terminal cover plate and found the L1 (Red Wire) was on the Neutral terminal and the Neutral was on the L1 (Red) terminal. Corrected terminal block and pushed unit back in and reconnected downdraft, also had customer turn breaker back on, ran bake cycle at 350 and found unit now heating properly. Advised customer turn on a fan or open window to allow oven to do a proper burn off cycle before cooking in it. Unit checks ok"
We serviced a
ROPER DRYER
Model RED4516FW0
Near Candler, NC 28715
Kari
Job Details:
11/19/2024
"Took quick pics, found unit not heating. Found hi limit open and a lot of lint in the exhaust line. The exhaust line was way too long and crushed in places. Cut excess duct off and replaced hi limit. Unit checks ok ; used 1 W10900067 (Cutoff thermal) from stock"
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Greer, SC 29651
Carl
Job Details:
11/19/2024
Ran diagnostics and a test cycle adjusted feet and leveled unit ran test cycle again unit ck ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Fletcher, NC 28732
Brian
Job Details:
11/19/2024
Unit unplugged and water turned off when I arrived. Turned water on and plugged unit in. Found f4e3 (motor not running) inspected and found water dripping from wash motor. New Pump and motor (W11613479) needed. Left unit unplugged and water turned off. Did not move unit. ; ordrng 1 W11613479 (Pump and motor) and 1 L14 (Job code)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Hendersonville, NC 28791
Brian
Job Details:
11/19/2024
"Unit unplugged when I arrived. Plugged unit in and found drain pump coming on. Let pump time out, and entered diagnostics, before pump came back on. Found f1e1 (main control fault) f3e1 (pressure system fault). Control (W11603810) and pressure hose (WP353244) needed. ; ordrng 1 W11603810 (Control) and 1 WP353244 (Pressure hose) and 1 J13 (Job code)"
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Candler, NC 28715
Kari
Job Details:
11/19/2024
"Took quick pics, found unit not heating. Took front panel off found a thermal open. Installed new thermal. Unit checks ok"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Belton, SC 29627
Jerry D.
Job Details:
11/19/2024
Found ref pulling .5 amps checked low side preasure in a 12 inch vacuum. preasurized with dry nitrigen could find no leaks. Installed dye drier and access valve pulled vacuum and recharged now cooling operations normal
We serviced a
JENN AIR RANGE
Model JDRP848HL00
Near Anderson, SC 29621
Frank
Job Details:
11/19/2024
"Replaced door latches.. same called Techline replacing main board... Furgeson 9/11/2020. Control under warranty and start lights stay on, replacing ui... ; ordrng 1 W11333174 (Control) and 2 W11319204 (Ui)s"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Belton, SC 29627
Frank
Job Details:
11/19/2024
"Found and cleaned out water from crisper drawer where ui goes.,.. Put in ui not coming on.. need to replace control as well. Customer decided not to replace control.. put in old ui need to refund. Total of $104.37.."