We serviced a
WHIRLPOOL M/W OTR
Model UMV1170LS00
Near Belton, SC 29627
Jerry D.
Job Details:
03/11/2024
"Motor inoperable, installed motor sent preid, cycled unit through test and unit checks ok"
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Easley, SC 29642
Larry M.
Job Details:
03/11/2024
Found no power from main switch. Found door not latching. Ordering main control and door latch; ordrng 1 W11050715 (Switch) and 1 WPW10185982 (Timer) and 1 W10704067 (Harness) and 1 W11429587 (Door catch) and 1 WPW10529197 (Latch)
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Anderson, SC 29621
Jerry D.
Job Details:
03/11/2024
"Motor inoperable, ordering, j13; ordrng 1 W11525546 (Sump assy)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Seneca, SC 29672
Frank
Job Details:
03/11/2024
Found freezer light not lighting when opening freezer door. Lights when rc door opens.. could be switch or board. ; ordrng 1 W11291142 (Switch) and 1 W10804160 (Led power) and 1 WPW10675033 (Control board)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Anderson, SC 29621
Jerry D.
Job Details:
03/11/2024
"Damper motor noisey, estimate 421.00, customer okd repair, ordering, j13; ordrng 1 W10479155 (Damper)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS00
Near Seneca, SC 29672
Jerry D.
Job Details:
03/11/2024
"Installed access port , Cycled unit through test # 4, diverter valve stuck, found no voltage to 3 way diverter valve, advised customer unit will need a new power and machine controller , also interface is shorted from Controller going bad, estimate for repairs is 1,890.00, customer doesnt want to continue repairs on this unit"
We serviced a
JENN-AIR MICROWAVE
Model JMW3430WS02
Near Townville, SC 29689
Frank
Job Details:
03/11/2024
Console not responding. Needs panel and board just for panel 2811$. Not repairing. Paying TC..
We serviced a
MAYTAG DRYER
Model MGD5030MW1
Near Pendleton, SC 29670
Frank
Job Details:
03/11/2024
Installed parts tested working intermittent. Called Techline Sr 7738646116. Ordering encoders and another board as per tech line.. ; ordrng 1 WPW10414397 (Encoder switch) and 3 W11168256 (Encoder switch)s and 1 W11486550 (Encoder harness) and 1 W11437795 (Encoder harn) and 1 W11630382 (Control)
We serviced a
MAYTAG WASHER
Model MVWX655DW0
Near Greer, SC 29651
Chris
Job Details:
03/11/2024
"Customer states unit makes loud noise. Customer has video of noise, noise is coming from drive train. Unit has no stored faults. Ran diagnostics cycle. Unit passes test cycle . Unit has loud noise from drive train. Noise is coming from Gearcase. Unit needs Gearcase,cam,washplate,hub and belt. Gave customer a bluebook estimate for repair at $1487.90. Customer denied repair"
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Greer, SC 29651
Chris
Job Details:
03/11/2024
Unit dies mid cycle. Ordering parts for repair ; ordrng 1 W11618917 (Control) and 1 WP697772 (Wheel) and 1 W10888146 (Housing) and 1 W11549461 (Motor) and 1 W11481730 (Bracket) and 1 WP8577274 (Thermistor)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Greer, SC 29651
Chris
Job Details:
03/11/2024
Customer states doors open to wides. Complaint Is fresh food doors. Doors are installed correctly. Found door closer cracked on left door replaced . Unit operates as designed. Unit check is ok
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS3
Near Greer, SC 29651
Chris
Job Details:
03/11/2024
Found shorted turntable motor .ordeing parts for repair ; ordrng 1 W10642989 (Motor) and 1 W11245707 (Support) and 1 W10208631A (Grease trap)
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Greer, SC 29651
Chris
Job Details:
03/11/2024
Unit has deformed glass. Ordeing for repair ; ordrng 1 W11316777 (Door)
We serviced a
WHIRLPOOL DISHWASHER
Model WDPA70SAMZ1
Near Duncan, SC 29334
Chris
Job Details:
03/11/2024
Installed new panel.
We serviced a
WHIRLPOOL ICE MACHINE
Model KUIX505ESS1
Near Inman, SC 29349
Chris
Job Details:
03/11/2024
"Unit now has good water flow. Condenser fan, recirculating pump energize, unit has no frost pattern on plate. Refrigerant noise can be heard trying to circulate through system . Spoke with Matt. Matt advised to quote customer refrigerant fee,labor and evaporator. Gave customer a bluebook estimate for repair at $1236.90. Ordering for repair . Customer to pay balance upon completion of repair ; ordrng 1 Longjobx20 and 1 Tap and 1 WPW10218037 (Evaporator) and 1 Longjob and 1 Sealedsystemtech"
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Asheville, NC 28804
Kari
Job Details:
03/11/2024
"Took quick pics, found drum not turning but motor starts. Found belt snapped and looks like it got caught in a wear mark on idler pulley. Installed roller kit. Unit checks ok ; used 1 4392065 (Roller kit) from stock"
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS1
Near Hendersonville, NC 28791
Brian
Job Details:
03/08/2024
"Found 10-2 (dispenser electric problem)l tested unit, and unit completed without issues. I found dispenser operating, but it sounded like it was struggling to open. New dispenser (W11412300) control (W11629911) vent (W11649995) bezel (W11545290) needed. ; ordrng 1 W11412300 (Dispenser) and 1 W11629911 (Control) and 1 W11649995 (Vent) and 1 W11545290 (Bezel) and 1 L14 (Job code)"
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS4
Near Anderson, SC 29625
Frank
Job Details:
03/08/2024
Replaced glass top. Tested working ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ11
Near Taylors, SC 29687
Chris
Job Details:
03/08/2024
Unit is far out of manufacture warranty . Manufacture warranty is 12 months parts and labor . Unit has bad led in refrigerator section and customer wants unit raised . Gave customer a blue book estimate for repair at $436.99.customer denied repair
We serviced a
MAYTAG DRYER
Model MED5630HC2
Near Anderson, SC 29625
Frank
Job Details:
03/08/2024
Found on arrival ui not responding.. while taking off lid. Ui started to work.. now can not duplicate problem.. called Techline. Sr 7738640197.. ordering ui and board.. ; ordrng 1 W11384512 (Console) and 1 W11316625 (Harness) and 1 W11512515 (Control board) and 1 Jobcodel14 (Job code l14)
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Inman, SC 29349
Sam
Job Details:
03/08/2024
Found units thermal fuse blown again on blower housing and heating element housing. Will order parts.; ordrng 1 WP3387747 (Element) and 1 WP8557403 (Hi limit t stat) and 1 W10909685 (Thermal fuse)
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Boiling Springs, SC 29316
Sam
Job Details:
03/08/2024
"Found lid not locking and progressing cycle.Found strike cracked in half not allowing it to lock. Replaced strike from stock. Cycled unit, Lid locks, all functions pass."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Boiling Springs, SC 29316
Sam
Job Details:
03/08/2024
"Found unit not starting cycle or powering on. Found loose connection at control board behind door panel. Fixed loose connection. Also found leaking at corner of of door from unit ps door being misaligned, realigned door cycled unit through quick wash unit now turning on and cycle completed perfectly all components activated. All functions pass."
We serviced a
WHIRLPOOL WASHER
Model MVW6500MBK0
Near Spartanburg, SC 29303
Sam
Job Details:
03/08/2024
Installed outer tub. Cycled unit through quick wash. All components working no leaks found. All functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM02
Near Greenville, SC 29609
Larry M.
Job Details:
03/08/2024
Found surface rust on both doors
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Spartanburg, SC 29307
Matt
Job Details:
03/08/2024
Replaced controls and actuator. Ran a quick wash cycle to test operation.all functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW6157PW0
Near Greenville, SC 29617
Larry M.
Job Details:
03/08/2024
Gave customer parts
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Easley, SC 29642
Larry M.
Job Details:
03/08/2024
Unit in middle of floor when I arrived.Installed wiring harness. No response. Ordering harness again ; ordrng 1 W11591637 (Harness)
We serviced a
WHIRLPOOL WASHER
Model MVWC465HW4
Near Cullowhee, NC 28723
Kari
Job Details:
03/08/2024
"Took quick pics, found unit lid lock showing wont unlock code and a motor cw open. Found capacitor good and motor resistance is correct. Found when I took sheild off gearcase there is bearing oil in it. Would need gearcase, cam and latch for repair. Gearcase and cam are covered under part warranty. Gave customer est of $487.48 customer is calling whirlpool to see if they will cover it due to this being the second gearcase in less than a year. Had office run cc for Tc of $125 and email receipt"
We serviced a
MAYTAG WASHER
Model MVWB835DW0
Near Anderson, SC 29621
Jerry D.
Job Details:
03/08/2024
"Found locked rotor code for gearcase, cycled unit through test and unit checks ok"
We serviced a
MAYTAG WASHER
Model MVWX655DW2
Near Pelzer, SC 29669
Jerry D.
Job Details:
03/08/2024
"Found unit unlevel out of balance code, bottom of cabinet bending at legs, releveled unit cycled unit through test and unit checks ok"
We serviced a
WHIRLPOOL RANGE
Model WFG535S0lZ4
Near Easley, SC 29642
Larry M.
Job Details:
03/08/2024
"Igniter failing to light. Installed new igniter, ran bake cycle checks o.k."
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Spartanburg, SC 29303
Sam
Job Details:
03/08/2024
"Not heating. Checked all fuses, thermostats, and heating element all check ok with ohm reading. Unit not getting voltage to heater. Will order parts.; ordrng 1 W11591402 (Control) and 1 W11448299 (Harness) and 1 279827 (Motor)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ00
Near Easley, SC 29642
Frank
Job Details:
03/08/2024
Damper rattling in test 3. All other tests in diagnostics pass; ordrng 1 WPW10479155 (Damper control) and 1 Jobcodel14 (Job code l14)
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Easley, SC 29642
Larry M.
Job Details:
03/08/2024
"Verified heater is working and has correct amount of wattage. Ran diagnostic cycle, checks o.k785 watts Called techline and spoke to Austin Advised to order main control File number 7738640435; ordrng 1 W11637581 (Main control)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Fountain Inn, SC 29644
Carl
Job Details:
03/08/2024
Installed new imk cycled new unit got good fill unit ck ok
We serviced a
KITCHEN AID RANGE
Model KSDB900ESS0
Near Simpsonville, SC 29681
Carl
Job Details:
03/08/2024
Found bake element open and a bad relay on board installed new control and element cycled unit to ck operation unit ck ok
We serviced a
ELECTROLUX REFRIGERATOR
Model LFHB2751TF7
Near Greer, SC 29651
Chris
Job Details:
03/08/2024
Last visit unit had broken imk . Imk was physically broken. Unit has put made ice since new imk was installed . All connections tight. Removed imk. Fill tube is frozen. Customer states imk was broke and dangling for over a week making a total time of 2 weeks or more before new imk was installed. Cleared fill tube with steamer. If return call for service is needed customer may need new valve for valve bleeding. Unit check is ok
We serviced a
KITCHEN AID REFRIGERATOR
Model KRSF505ESS00
Near Greer, SC 29650
Chris
Job Details:
03/08/2024
Customer canceled
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Spartanburg, SC 29303
Sam
Job Details:
03/08/2024
Unit not getting power to control. Possible failure with power cord will order power cord and control.; ordrng 1 W10877409 (Power cord) and 1 W11603810 (Control)
We serviced a
KITCHENAID RANGE
Model KODE500ESS20
Near Simpsonville, SC 29681
Carl
Job Details:
03/08/2024
Found lower door latch wont complete open/lock cycle l14; ordrng 1 Wpw10213755 (Door latch) and 1 L14 (Labor)
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Simpsonville, SC 29681
Carl
Job Details:
03/08/2024
Cycled unit to ck operation temps ck good and advised customer on the heat exchange will change to a darker color unit ck ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ09
Near Simpsonville, SC 29681
Carl
Job Details:
03/08/2024
Found filter clogged installed bypass cycled unit got good flow advised customer to replace filter
We serviced a
JENN-AIR OVEN/MW COMBO
Model BD-JMW3430DS02
Near Piedmont, SC 29673
Jerry D.
Job Details:
03/08/2024
"Installed console sent to customer, all functions are working properly, Labor , 398.00"
We serviced a
WHIRLPOOL WASHER
Model Wfw5620hw0
Near Simpsonville, SC 29680
Jerry D.
Job Details:
03/08/2024
"Hot valve inoperable, installed valve sent preid, cycled unit through test and no leaks found , 387.00"
We serviced a
MAYTAG DISHWASHER
Model MDB9979SKZ0
Near Travelers Rest, SC 29690
Larry M.
Job Details:
03/08/2024
Leveled dishwasher. Checks ok
We serviced a
MAYTAG DRYER
Model MEDB835DC4
Near Greenville, SC 29605
Larry M.
Job Details:
03/08/2024
Replaced blower wheel and motor. Ran test cycle functions pass.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF540PADM3
Near Greer, SC 29651
Chris
Job Details:
03/08/2024
Unit has shorted wash motor. Ordeing for repair ; ordrng 1 W11025157 (Sump assembly) and 1 W10906428 (Control)
We serviced a
KITCHEN AID DISHWASHER
Model KDTM604KPS0
Near Greer, SC 29650
Chris
Job Details:
03/08/2024
Unit has f7-e1 faults. Cleared faults and ran diagnostics. Wash motor pulls 0amps.wash motor is locked.gave customer a bluebook estimate for repair at $748.77. Customer declined repair .
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Fletcher, NC 28732
Brian
Job Details:
03/08/2024
"Found lid strike broken. Installed new strike, calibrated and tested unit, observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit."
We serviced a
WHIRLPOOL WASHER
Model MVW6230HW2
Near Asheville, NC 28803
Brian
Job Details:
03/08/2024
"Found wire to drain pump broken again. Repaired and secured wires. Calibrated and tested. Found all operations ok at this time with no leaks detected. Informed customer that if issue occurs again, main wire Harness (W11590868) may need to be replaced. Quoted customer 389.47 to replace harness. Customer did not wish to replace harness at this time. ; O-emld tckt"
We serviced a
AMANA REFRIGERATOR
Model ART318FFDB10
Near Asheville, NC 28803
Brian
Job Details:
03/08/2024
Fridge is in 2-209. Found unit cooling and all fans running but no display. Inspected and four door switch missing. New Door switch (W11123941) needed. Quoted customer 286.95. ; ordrng 1 W11123941 (Door switch) and 1 J13 (Job code)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT314TFDB03
Near Asheville, NC 28804
Brian
Job Details:
03/08/2024
Found all fans running. Compressor coming in and staying on. Observed frost pattern and found only the first few rows on the evaporator frosting. Sealed system repairs needed. R600a. Evaporator (W11579351) coupler (W11504450) coupler (W11506620) compressor (W11580057) coupler (W11504415) coupler (W11504430) coupler (W11506619) dye drier (wpw10143759); ordrng 1 W11579351 (Evaporator) and 1 W11504450 (Coupler) and 1 W11506620 (Coupler) and 1 W11580057 (Compressor) and 1 W11504415 (Coupler) and 1 W11504430 (Coupler) and 1 W11506619 (Coupler) and 1 R600a (R600a) and 1 X20 (Sealed system tech) and 1 wpw10143759 (Dye drier)
We serviced a
KITCHEN AID DISHWASHER
Model KDFE104DBL2
Near Simpsonville, SC 29681
Jerry D.
Job Details:
03/08/2024
"Motor leaking, ordering, j13; ordrng 1 W10605057 (Sump assy)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Fountain Inn, SC 29644
Jerry D.
Job Details:
03/08/2024
"Temps 36@1, Installed listed parts cycled unit through test and all functions are working properly"
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS04
Near Flat Rock, NC 28731
Matt
Job Details:
03/08/2024
"Replaced door. Checked operation, checks o.k"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Columbus, NC 28722
Matt
Job Details:
03/08/2024
"Put unit in test 4. Added nitrogen. Leak checked and found high side leak. Repaired high side leak. Replaced compressor,three way and drier filter. Pressure tested again. No leaks found. Pulled a vacuum and weighed in 1.98 ounces r 600a. Checks o.k trade care authorization k1al6x1nl1.5"
We serviced a
MAYTAG DRYER
Model MEDB835DW4
Near Moore, SC 29369
Chris
Job Details:
03/08/2024
Found noisy rollers and pulley. Replaced from stock. Unit check is ok ; used 1 4392065 (Kit) from stock
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC700HPS04
Near Liberty, SC 29657
Frank
Job Details:
03/08/2024
Line froze in rc. Not letting in water for ice maker and drinking.. thawed working ok..
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Clyde, NC 28721
Kari
Job Details:
03/07/2024
"Took quick pics, found unit not cleaning. Found unit showing 4-3 open motor code. Found the board send 60v to motor and motor just hums when power applied to it. Will need parts for repair. Prescheduled for 3/19 PM; ordrng 1 W11637583 (Control) and 1 L14 (Job code) and 1 W11613480"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Westminster, SC 29693
Frank
Job Details:
03/07/2024
Ran tested working ok.. customer having trouble with start button holding for count of 3... Finding it's a common problem
We serviced a
WHIRLPOOL WALL OVEN
Model WOS31ES7JS20
Near Westminster, SC 29693
Frank
Job Details:
03/07/2024
Installed temp probe and control board.. tested working ok. Calibrated ok..
We serviced a
JENN-AIR OVEN
Model JJW3830IL01
Near Seneca, SC 29672
Frank
Job Details:
03/07/2024
Installed control boards tested working ok.. rebuilt door.. working ok.
We serviced a
JENN-AIR DOUBLE WALL OVEN
Model JJW3830WS00
Near Simpsonville, SC 29681
Carl
Job Details:
03/07/2024
Criss. sr#7738632523 appl mgt no longer available Advised customer
We serviced a
JENN-AIR OVEN
Model JJW3830IL01
Near Greer, SC 29651
Chris
Job Details:
03/07/2024
Installed new panel . Unit check is ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ04
Near Simpsonville, SC 29681
Carl
Job Details:
03/07/2024
Installed new imk and valve cycled unit to ck operation unit ck ok
We serviced a
WHIRLPOOL COOKTOP
Model WCE77US0HB01
Near Greer, SC 29651
Chris
Job Details:
03/07/2024
Unit will not power on. Called tech line and spoke with Brandon . With all access to terminal block and unit . Brandon advised wiring job is bad . L1 and l2 is tied into the same phase. 240v isnt coming to unit . No problem with unit. Electrician is present and doesnt under stand wiring problem. File number for call is 7738632324
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Hendersonville, NC 28791
Brian
Job Details:
03/07/2024
"Found center shelves not installed properly, preventing doors from sealing. Adjusted shelves and tested. Found all operations ok at this time, with no leaks detected. Did not move unit."
We serviced a
MAYTAG DRYER
Model MED5630HW2
Near Pickens, SC 29671
Larry M.
Job Details:
03/07/2024
Found heater to be ok. Dryer not heating. Ordering main control and UI; ordrng 1 W11384511 (UI) and 1 W11512515 (Main control)
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ0
Near Greer, SC 29650
Chris
Job Details:
03/07/2024
"Customer states dishwasher cycle status indicator light on dishwasher has turned blue in the past week but the light has been red for the life of unit since install. Unit has no stored faults . Unit passes automatic test mode. Cant find any literature on tech sheet,use and care guide ,quick reference sheet or owners manual. Called tech line and spoke with Chris . Chris indicates cycle status indicator will be blue when unit is in cycle, red when drying and white when cycle is complete . Unit works as designed. File number for call is 7738630363. showed customer use and care guide page w10903644 on page 10."
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS2
Near Greer, SC 29650
Chris
Job Details:
03/07/2024
Installed new parts. Customer had unit uninstalled . Customer advised he would like to reinstall unit . Customer is leveling floors Beneath install . All connections are double checked and tight .
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Taylors, SC 29687
Chris
Job Details:
03/07/2024
Installed new parts. Unit check is ok
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Taylors, SC 29687
Chris
Job Details:
03/07/2024
Unit has cracked valve and leaking hand valve. Replaced washer inlet valve. Notified customer of leaking hand valve. Unit check is ok . No leaks from unit it
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ15
Near Gaffney, SC 29341
Sam
Job Details:
03/07/2024
Found unit not dispensing ice. Found when ice bin is in unit it gets stuck and doesnt rotate. When bin is free of ice bin motor rotates and works properly. Will order parts for repair.; ordrng 1 W11185686 (Ice container) and 1 WP63052-2 (Yoke)
We serviced a
KITCHEN AID REFRIGERATOR
Model KRSF705HBS
Near Gaffney, SC 29341
Sam
Job Details:
03/07/2024
Installed all parts. Cycled unit back on checked diagnostics steps. All components working all functions pass.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ00
Near Gaffney, SC 29341
Sam
Job Details:
03/07/2024
Found unit not making ice. Found wires at bottom of door broken. Will order door and 2nd man for repair.; ordrng 1 LW11038917 (Door) and 1 2ndman (2nd man)
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHB4
Near Abbeville, SC 29620
Jerry D.
Job Details:
03/07/2024
"Motor inoperable, installed motor sent preid, cycled unit through test and no leaks found unit checks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Salem, SC 29676
Larry M.
Job Details:
03/07/2024
Installed freezer door and leveled unit. Doesnt match with other door ordering fridge door; ordrng 1 LW10912110 (Fridge door)
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Pelzer, SC 29669
Matt
Job Details:
03/07/2024
"Dryer making loud noise when running. Unable to determine exact location of the noise. Replaced motor,blower,tensioner,rollers and belt. Checks o.k"
We serviced a
JENN-AIR RANGE
Model JDS1750ML0
Near Piedmont, SC 29673
Matt
Job Details:
03/07/2024
Door scoop is black not stainless. Parts department is sending over to parts research. Control panel also has a gap in the same place that I documented with tech line last time.; ordrng 1 W11251351 (Scoop) and 1 W11679227 (Console) and 1 Partsresearch (Parts research)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ09
Near Easley, SC 29640
Matt
Job Details:
03/07/2024
Found freezer temperature at 2 degrees and fresh food section at 35 degrees. Ice maker has ice frozen in it but not dumping. Replaced ice maker. Ice maker cycled and filled with water.
We serviced a
KITCHEN AID REFRIGERATOR
Model KSBS25INBL01
Near Greenville, SC 29615
Matt
Job Details:
03/07/2024
Installed valve. Checked operation. All functions pass.
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW3
Near Abbeville, SC 29620
Jerry D.
Job Details:
03/07/2024
"Actuator soaked with oil and inoperable, f7e1, pulley grinding, installed parts sent preid, cycled unit gearcase leaking and locked up, ordering Gearcase , Q16; ordrng 1 Q16 (Q16) and 1 W11164183 (Gearcase)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Taylors, SC 29687
Matt
Job Details:
03/07/2024
Evacuated system. Replaced compressor and drier filter. Pulled a vacuum and weighed in 2.26 ounces of r 600a. Good frost pattern on evaporator.
We serviced a
ELECTROLUX WASHER
Model ELFW7637BT
Near Simpsonville, SC 29681
Carl
Job Details:
03/07/2024
Installed new valve ran diagnostics and a test cycle to ck operation unit ck ok
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS09
Near Simpsonville, SC 29681
Carl
Job Details:
03/07/2024
Sr# 7738630489 chris advised to replace harness and filter board n15; ordrng 1 W10422269 (Noise filter) and 1 W11690869 (Main harness) and 1 W11301790 (Harness) and 1 W11545871 (Tranformer) and 1 N15 (Labor)
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Simpsonville, SC 29681
Carl
Job Details:
03/07/2024
Found bolt and shaft of gearcase stripped l14; ordrng 1 W11454741 (Gearcase) and 1 W10772621 (Screw and washer)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT313CZLB00
Near Greenwood, SC 29646
Jerry D.
Job Details:
03/07/2024
"Fan motor running but noisey, Gaps in cabinet and liner, drain frozen again, t line jonathon, seal drain at compressor with sealant to prevent air getting into frezer also seal around cabinet and liner, ordering, Q16; ordrng 2 Wp482338 (Sealent)s and 2 8201711 (Sealent)s and 1 W11117547 (Fan motor) and 1 W11488945 (Drain)"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Greenwood, SC 29649
Jerry D.
Job Details:
03/07/2024
"Trouble understanding customer, she states clothes are stuck to the sides after spin is done, cycled unit through test and no codes, advised customer to slow spin speed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFF507HPS03
Near Belton, SC 29627
Jerry D.
Job Details:
03/07/2024
"Compressor inoperable, ordering, S17; ordrng 1 S17 (S17) and 1 W11574734 (Compressor)"
We serviced a
WHIRLPOOL DRYER
Model WED8127LC2
Near Simpsonville, SC 29680
Jerry D.
Job Details:
03/07/2024
"Forgot part, ordering, j13; ordrng 1 W11562730 (Console)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Boiling Springs, SC 29316
Sam
Job Details:
03/07/2024
Found unit not cleaning dishes. Found f4 e3 error code for wash motor. All connections secure. Also found console peeling and discolored Will order parts.; ordrng 1 W11613479 (Pump and motor) and 1 W11612307 (Console)
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Boiling Springs, SC 29316
Sam
Job Details:
03/07/2024
Customer claims unit stopped mid cycle. Found unit has f7 e1 error code for actuator in diagnostics. Replaced actuator from stock. Cycled unit through quick wash. All components working properly. All functions pass.; used 1 W11481722 (Actuator) from stock
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ1
Near Fairview, NC 28730
Brian
Job Details:
03/07/2024
Found user interface visually warped. New user interface (W11660284) And control (W11672039) needed. ; ordrng 1 W11672039 (Control) and 1 W11660284 (Ui) and 1 J13 (Job code)
We serviced a
WHIRLPOOL WASHER
Model WTW6120HC0
Near Arden, NC 28704
Brian
Job Details:
03/07/2024
"Found f7e7 (motor unable to reach target rpm) F7e6 (motor circuit open) error codes. Ran unit through diagnostics and Unit completed cycle, but belt was squealing and shifter had a hard time shifting. New Shifter (W10913953) cam (W10721967) acu (W11543998) and belt (W11239857) needed. ; ordrng 1 W11239857 (Belt) and 1 W10913953 (Shifter) and 1 W10721967 (Cam) and 1 W11543998 (Acu) and 1 L14 (Job code)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW02
Near Mills River, NC 28759
Brian
Job Details:
03/07/2024
"Found all fans working. Compressor is running but there is zero cool. Sealed system repairs needed, R600a. Evaporator (W11578004) coupler (W11504450) coupler (W11506619) compressor (W11580057) coupler (W11506619) coupler (W11574641) coupler (W11506619) dye drier (Wpw10143759); ordrng 1 W11578004 (Evaporator) and 1 W11504450 (Coupler) and 1 W11506619 (Coupler) and 1 W11580057 (Compressor) and 1 W11506619 (Coupler) and 1 W11574641 (Coupler) and 1 W11506619 (Coupler) and 1 R600a (R600a) and 1 X20 (Job code) and 1 Sealedsystemtech (Sealed system tech) and 1 Dyedrier (Wpw10143759)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Fletcher, NC 28732
Brian
Job Details:
03/07/2024
"Extend freeze light on. When I put unit into diagnostics, fresh food evap fan stayed on, until I turned it offContacted tech support and spoke to Bruce. After informing him of findings and repairs done already, we found thermistors reading ok and that at some point in the past 6 hours, the fresh food section reached temps of 32, which is too cold. I found all fans and dampers working properly. Bruce recommend replacing controls on unit. User interface (W11574767) dispenser control (W11574766) and main control (W11664342) needed. Sr number (7738629798); ordrng 1 W11664342 (Control) and 1 W11574767 (Ui) and 1 W11574766 (Dispenser control) and 1 L14 (Job code)"
We serviced a
AMANA WASHER
Model n/a
Near East Flat Rock, NC 28726
Brian
Job Details:
03/07/2024
Found lid strike broken. New strike (W11457841) needed. ; ordrng 1 W11457841 (Strike) and 1 J13 (Job code)
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Fountain Inn, SC 29644
Carl
Job Details:
03/07/2024
Ran diagnostics found no voltage from harness ohm harness open l14; ordrng 1 W11643701 (Lower harness)
We serviced a
WHIRLPOOL DISHWASHER
Model WDPA70SAMZ1
Near Canton, NC 28716
Kari
Job Details:
03/07/2024
"Took quick pics, found unit full of water and showing F9E1 error. Found the drain motor running but no water moving out. Found lines are clear. Cleared water and took pump off found impeller fractured. Installed new pump, unit checks ok"