Installed new door hinges and outer door panel. Tested and found all operations ok at this time. Did not move unit.

Found right hand door dented on the top. New RH door (W11681453) needed. ; ordrng 1 W11681453 (RH door) and 1 L14 (Job code)

"Installed new ice maker. Tested observing for leaks and proper functions. At this time, all operations ok with no leaks detected. Did not move unit."

"Found no saved error codes. Tested moisture sensors and found them responding and functioning properly. Unit is reaching proper temps and getting proper voltage. Checked and found airflow still restricted. Removed vent line and found airflow ok. Showed customer the airflow difference with vent line attached and not attached. Also explained to customer how the moisture sensors operate and with some loads, large loads in particular, moisture sensors may not sense wet clothes, resulting in some damp items. At this time, unit is functioning as designed."

"Found f0e8 (water ring). Tested unit in diagnostics and found unit completing cycle without issue. I found unit wobbly and not level. Leveled unit. When unit is in spin cycle, unit vibrates and shakes other things in room due to unsturdy floor. Informed customer that that is an issue with the floor itself, and not the unit. Also found extra rinse setting coming on when drain and spin is selected. Explained to customer that if the extra rinse is selected, the unit will add water to cycle. Also explained to customer proper loading procedures and the importance on not overloading machine and recommended washing comforters and other large items at a laundry mat. If load is too large, unit may get out of balance and not complete cycle properly. Customer understood. At this time, unit is functioning as designed with no leaks detected."